• 농촌계획
• /
• 제2권1호
• /
• pp.69-78
• /
• 1996

Environmental impact assessment survey reflecting farmers` opinion on the residence and production space in rural settlement area by ORD showed that more than 86% of respondents thought their reservoirs and waterways (small rivers) were getting seriously contaminated primarily by garbage and livestock manure. A typical rural settlement unit was taken to assess the impact of improper management of livestock manure in the farms on the water quality of small river flowing down along the villages where swine and dairy farms were situated in Daejook 2, 3-ri, Seolseong-myun, Icheon-gun. Nitrogen compounds such as NO$_3$-N, NO$_2$-N, NH$_3$-N, and phosphorus compound H$_x$PO$_4$, DO, BOD$_5$, COD, and microbial density were analyzed to evaluate water quality at five test sites designated along the water stream. Tests showed. for example, BOD$_5$ at site 4 was average 9.2mg/l which was about 3~8 times higher than that of observation site 2 and 3, at which most livestock houses were situated. This is a clear evidence that the nutrients of livestock manure illegally discharged to small river can lead to an eutrophication of the river at downstream. A soil absorption system with aeration could be one of alternatives to treat the contaminated wastewater by livestock manure. The place at downstream, inbetween observation site 1 and 2, could be the best construction site for the treatment facility from the standpoint of the overall treatment efficiency, An enclosed composting system can also be regarded as a good alternative for treatment of the sludge which is the by-product of the soil absorption system operation.

• 한국약용작물학회지
• /
• 제26권3호
• /
• pp.240-247
• /
• 2018

Background: Saline soil has negative effects on the growth of most crops. Sodium is the main element that causes salt accumulation in soil. Organic materials such as cow and poultry manure, are frequently used during the preparation stage, which causes an increase in the rate of salt accumulation in the soil. Methods and Results: To investigate the influences of sodium on ginseng, $NaH_2PO_4$, $Na_2SO_4$, and NaCl were used to adjust the sodium concentrations at 0, 12.5, 25, 50, 75 and 100 mM in nutrient solution. In a 2-year-old ginseng, toxic symptoms appeared when the sodium treatment exceeded 50 mM. The sodium concentration in the leaves was 3.33%, which is more than twice as high as that of the control treated at 50 mM. As the sodium concentration increased, the root weight significantly decreased. In the 100 mM treatment, the weight decreased by 28% when compared to that of the control. The Amount of ginsenoside significantly increased with an increase in sodium concentrations. Conclusions: These results suggest that the growth of 2-year-old ginseng is negatively affected when sodium exceeds 50 mM. This result can be used for a as basis in diagnosing the physiological disorders of ginseng.

• 생약학회지
• /
• 제48권1호
• /
• pp.88-92
• /
• 2017

In the present study, we carried out quantitative analysis of chrysin and pinocembrin in Korean propolis by ultra performance liquid chromatography (UPLC) equipped with diode array detector. The separation was done using BEH C18 ($2.1{\times}50mm$, $1.7{\mu}m$) column with a mobile phase consisting of MeCN and 0.1% $H_3PO_4$ at 280 nm. The chromatographic method was validated for specificity, limit of detection, limit of quantification, linearity, precision, and accuracy. A quantitative analysis exhibited that the contents of the two compounds in Korean propolis collected from 8 inland areas except Jeju-do ranged from 3.1-46.0 mg/g. These results will be valuable as basic data for standardization of Korean propolis.

• 대한화학회지
• /
• 제31권3호
• /
• pp.244-249
• /
• 1987

미생물의 대사산물 중에서 각각의 균주에 특징있게 생성되는 탄소수 $C_2-C_5$인 휘발성 유리산의 정성 정량 분석자료는 혐기성 미생물을 확인하는 정보를 준다. 수용성 매체에 용해되어 있는 미생물의 대사산물을 처리함에 있어서 흡착제로 Chromosorbp를 사용한 liquid-solid extraction 방법에 대하여 조사 검토하였다. Chromosorb P는 친수성인 흡착제이므로 그 표면에 간섭물질인 수용성 성분들이 흡착되어 남아있는 반면에 비이온화성인 휘발성 유리산들은 ether에 의해서 정량적으로 회수가 된다. 이와 같이 신속하며 효율적으로 처리된 시료를 5% Carbowax 20M/0.75% $H_3PO_4$로 coating 된 stainless steel capillary column 으로 정성 정량분석하였다.

• 생약학회지
• /
• 제47권2호
• /
• pp.186-191
• /
• 2016

A new UPLC-DAD method for simultaneous determination of p-coumaric acid and trans-cinnamic acid in propolis was developed using Halo-C18 column and step gradient elution of MeCN and $0.1%H_3PO_4$ in 8 min. The method was validated by specificity, linearity, limit of detection, limit of quantification, precision(intra- and inter-day variability) and recovery tests. The validated method was sufficiently applicable for quantitative analysis of propolis products as well as propolis collected from different regions in Korea. The established method is simple, appropriate and efficient, and can be used for quality assessment of Korean propolis.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2004년도 임시총회 및 추계학술발표회
• /
• pp.72-75
• /
• 2004

The potential of electrokinetic (EK) technology has been successfully demonstrated for the remediation of heavy metal contaminated fine-grained soils through laboratory scale and field application studies. Arsenic contamination in soil is a serious problem affecting both site use and groundwater quality. The EK technology was evaluated for the removal of arsenic from two soil samples: kaolinite clay artificially contaminated with arsenic and arsenic-bearing tailing soil taken from the Myungbong (MB) mining area. The effect of cathodic electrolyte on the process was investigated using three different types of electrolyte: deionized water (DIW), potassium phosphate (KH$_2$PO$_4$) and sodium hydroxide (NaOH). The result of experiments on the kaolinite clay shows that the potassium phosphate was most effective in extracting arsenic, probably resulting from anion exchange of arsenic species by phosphate. On the contrary, the sodium hydroxide seemed to be most efficient in removing arsenic from the tailing soil, and it is explained by the fact that sodium hydroxide increased the soil pH and accelerated ionic migration of arsenic species through increase in desorption and dissolution of arsenic species into pore water.

• 한국세라믹학회지
• /
• 제49권1호
• /
• pp.72-77
• /
• 2012

In the preparation of a hydroxyapatite [HAp]/gelatin [GEL] nanocomposite, the GEL matrix in aqueous solution of $H_3PO_4$ was modified by the introduction of aspartic acid [Asp], asparagine [Asn], and glycine [Gly]. The addition of Asp, Asn and Gly greatly affected the slurry formation of HAp/GEL nanocomposite and the resulting dry body showed variations in toughness with the addition of the different amino acids. The introduction of Asn into HAp/GEL nanocomposite was effective for producing the organic-inorganic interaction between HAp and GEL, and caused the increase of toughness. The formation reaction of the modified HAP/GEL nanocomposites was investigated by using XRD and FT-IR. The organic-organic interaction between the GEL matrix and the additives of Asp, Asn and Gly was confirmed from FT-IR analysis, and the organic-inorganic interaction between HAp nanocrystallites and the modified GEL matrix was also discussed, using FT-IR spectra patterns. Nanocrystallites of HAp were covalently bound with the GEL macromolecules and differently influenced by the modification species of Asp, Asn, and Gly.

• 한국안전학회지
• /
• 제31권1호
• /
• pp.66-73
• /
• 2016

Lyocell fibers were used as a precursor in order to improve yield and strength of cellulose-based precursor while manufacturing activated carbon fiber(ACF). Lyocell fibers as a precursor for the preparation of ACF were surface-modified by reaction with 3-aminopropyltriethoxysilane(APTES) and pre-treated with KOH and H3PO4. Using aforementioned precursor, ACFs were prepared by a series of stabilization, carbonization and activation process at high temperatures. On each process, FT-IR, TGA, UTM and SEM were used to observe fibers' physical properties including structure and porous surfaces. FT-IR results proved that surface modification was achieved during stabilization, carbonization and activation process. TGA results during carbonization process found that surface modified fibers with APTES 0.02 mol(A2) showed higher thermostability, and extended pre-treatment increased yield. Especially, yield was found to have an increase of 10~20 wt% with surface modification during activation process. UTM results showed that tensile strength has the same order of concentration of APTES after surface modification, however, was found to show lower tensile strength than lyocell fibers after stabilization process. SEM results revealed that more homogeneous porosity control could be proceed after modifying the surface for the effective removal of hazardous substances.

• 한국재료학회지
• /
• 제16권1호
• /
• pp.63-67
• /
• 2006

The characteristics of the wet-etching of ZnO thin films were investigated using hydrochloric and phosphoric acid solutions as etchants. The etch rate of ZnO films, using highly diluted hydrochloric acid solutions at a concentration of 0.25% in deionized water, was determined to be about 120 nm/min, and linearly increased with increasing the acid concentration, resulting in $1.17{\mu}m/min$ when a 2% HCl solution was used. The surface of ZnO etched by an HCl solution, observed by scanning electron microscopy, showed a rough morphology with a high density of hexagonal pyramids or cones with sidewall angles of about ${\sim}45^{\circ}C$. Moreover, the sidewall angles of the masked area were similar to those of the pyramids on the surface. In comparison, the surface of ZnO etched by a phosphoric acid had a smooth surface morphology. The origin of this difference is from the very initial stage of etching, indicating that the etch-mechanism is different for each solution. Furthermore, when $H_3PO_4$ was added to the HCl aqueous solution, the morphology of the etched surface was greatly enhanced and the sidewall angle was also increased to about $65^{\circ}C$.

• Journal of Ceramic Processing Research
• /
• 제20권6호
• /
• pp.655-659
• /
• 2019

Calcium phosphates such as HA (hydroxyapatite), β-TCP (tricalcium phosphate) and biphasic HA/β-TCP, were synthesized by wet chemical precipitation in aqueous solution combined with ball milling process. Nanosize powders of the calcium phosphates were synthesized using Ca(OH)2 and H3PO4. The effects of initial precursor Ca/P ratio (1.30, 1.50 and 1.67), ball milling process and post heat-treatment on the phase evolution behavior of the powders were investigated. The phase of resulting powder was controllable by adjusting the initial Ca/P ratio. HA was the only phase for as-prepared powders in both cases of Ca/P ratios of 1.50 and 1.67. The single HA phase without any noticeable second phase was obtained for the initial Ca/P ratio of 1.67 in the overall heat-treatment range. Pure β-TCP and biphasic calcium phosphate (HA/β-TCP) were synthesized from precursor solutions having Ca/P molar ratios of 1.30 and 1.50, respectively, after having been heat-treated above 700 ℃. The β-TCP phase has appeared on the pre-existing DCPD (dicalcium phosphate dihydrate) and/or HA phase. Dense ceramics having translucency were obtained at a considerably lower sintering temperature. The modified process offered a fast, convenient and economical route for the synthesis of calcium phosphates.