• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.199-199
• /
• 2016

Commercially pure titanium (cp-Ti) and Ti alloys (typically Ti-6Al-4V) display excellent corrosion resistance and biocompatibility. Although the chemical composition and topography are considered important, the mechanical properties of the material and the loading conditions in the host have, conventionally. Ti and its alloys are not bioactive. Therefore, they do not chemically bond to the bone, whereas they physically bond with bone tissue. The electrochemical deposition process provides an effective surface for biocompatibility because large surface area can be served to cell proliferation. Electrochemical deposition method is an attractive technique for the deposition of hydroxyapatite (HAp). However, the adhesions of these coatings to the Ti surface needs to be improved for clinical used. Plasma electrolyte oxidation (PEO) enables control in the chemical com position, porous structure, and thickness of the $TiO_2$ layer on Ti surface. In addition, previous studies h ave concluded that the presence of $Ca^{+2}$ and ${PO_4}^{3-}$ ion coating on porous $TiO_2$ surface induced adhesion strength between HAp and Ti surface during electrochemical deposition. Silicon (Si) in particular has been found to be essential for normal bone and cartilage growth and development. Zinc (Zn) plays very important roles in bone formation and immune system regulation, and is also the most abundant trace element in bone. The objective of this work was to study electrochemical characteristcs of Zn and Si coating on Ti-6Al-4V by PEO treatment. The coating process involves two steps: 1) formation of porous $TiO_2$ on Ti-6Al-4V at high potential. A pulsed DC power supply was employed. 2) Electrochemical tests were carried out using potentiodynamic and AC impedance methoeds. The morphology, the chemical composition, and the micro-structure an alysis of the sample were examined using FE-SEM, EDS, and XRD. The enhancements of the HAp forming ability arise from $Si/Zn-TiO_2$ surface, which has formed the reduction of the Si/Zn ions. The promising results successfully demonstrate the immense potential of $Si/Zn-TiO_2$ coatings in dental and biomaterials applications.

• Korean Journal of Food Science and Technology
• /
• v.34 no.3
• /
• pp.351-355
• /
• 2002

Volatile compounds of kimchi-flavored steak sauce were isolated using simultaneous steam distillation and solvent extraction methods and identified by matching mass spectrum and retention index (RI) with the reference data. Twenty-three compounds including five aldehydes, four alcohols, four acids, three sulfur-containing compounds, one ketone, and six others were identified, among which the most abundant compound was eugenol. Sulfides such as dimethyl dis- and trisulfides, and acids such as acetic and dodecanoic acids showed strong effects on the kimchi flavor. Aroma extract dilution analysis with three fold dilution factor shown in over the FD value 34 identified 2-butanal, 2-pentylfuran, methyl-2-propenyl disulfide, and 2-furanmethanol. Strong good aroma was detected in the RI range between 1030 and 1357, bad aroma in RI 1561, sweety aroma in RI 2057, clover aroma of eugenol in RI 2122, and rancid flavor in RI 2251.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.6
• /
• pp.511-522
• /
• 1984

The Nagdong is one of the biggest rivers in Korea, which is very important water source not only for tap water of Pusan city but also for the industrial water. Therefore, authors tried to check the water quality year by year. In this experiment one hundred and twenty water samples collected from August 1983 to July 1984 were analyzed bacteriologically and physiologically. Fifteen sampling stations were established between near Samrangjin and estuary of the river. To evaluate the water quality, temperature, pH, chloride ion, salinity, chemical oxygen demand (COD), electrical conductivity, nutrients, total coliform, fecal coliform, fecal streptococcus, viable cell count and bacterial flora were observed. The variation of water temperature was ranged $-1.5{\sim}29.0^{\circ}C$ (Mean value $13.9{\sim}16.5^{\circ}C$), it in spring was higher as $10{\sim}15^{\circ}C$ about $10^{\circ}C$ than in winter and it in autumm was very stabilized as about $20^{\circ}C$ at each station. The pH variation of the samples was ranged $6.68{\sim}9.15$. The range of concentration of chloride ion and salinity varied $7.4{\sim}l,020.5$ mg/l and $1.05{\sim}33.0\%0$, respectively. Especially, salinity of the 3rd water war was the higher than others as $25.76{\sim}31.58\%0$. COD was ranged $1.45{\sim}14.94$ mg/l and the lower part of the Nagdong River was heavily contaminated by domesitc sewage and waste water from the adjacent factor area. The range of electrical conductivity was $1.360{\times}10^2{\sim}5.650{\times}10^4{\mu}{\mho}/cm$ and that was by far higher the estuary than the upper. Concentration of nutrients were $0.008{\sim}0.040$ mg/l (Mean value $0.019{\sim}0.068$ mg/l) for $NO_2-N,\;0.038{\sim}5.253$ mg/l ($0.351{\sim}2.347$ mg/l) for $NO_3-N,\;0.100{\sim}2.685$ mg/l($0.117{\sim}1.380$ mg/l) for $NH_4-N,\;0.003{\sim}0.084$ mg/l($0.014{\sim}0.065$ mg/l) for $PO_4-P$ and $0.154{\sim}6.123$ mg/l ($1.165{\sim}3.972$ mg/l) for $SiO_2-Si$, respectively. Usually nutrients contents of the water in the upper part(included station 1 to 5) were higher than those of the estuarine area. The bacterial density of the samples ranged 7.3 to 460,000/100 ml for total coliforms, 3.6 to 460,000/100 ml for fecal coliform, $0{\sim}46,000/100ml$ for fecal streptococcus and $<30{\sim}1.2{\times}10^5/ml$ for viable cell count. Composition of coliform was $28\%$ Escherichia coli group, $18\%$ Citrobacter freundii group, $31\%$ Enterobacter aerogenes group and $22\%$ others. Predominant species among the 659 strains isolated from the samples were Pseudomonas spp. ($42\%$), Flavobacterium spp. ($20\%$) and Moraxella spp. ($12\%$).

• The Korean Journal of Food And Nutrition
• /
• v.10 no.3
• /
• pp.394-400
• /
• 1997

The effects of methanol and water extracts of Taheebo were investigated on gastric secretion, gastric lesion and ulcer in rate. Experimental gastric lesion and ulcer was produced in rats using the following methods : HCl.aspirin-induced lesion, HCl.ethanol-induced lesion, indomethacin-induced ulcer and water-immersion stress ulcer model. In addition, the amount of gastric secretion in pylorus-ligated rats for 4 hours was determined. Water extracts of Taheebo significantly inhibited HCl.aspirin-induced gastric lesion at 1,000mg/kg, po in rats. Likewise, Water extracts of Taheebo caused significant inhibition of indomethacin-induced ulcer at oral dose of 1,000mg/kg. The lesion induced by HCl.ethanol was significantly reduced by both water and methanol extracts of Taheebo. It also showed significant antiulcer activity in water-immersion stress ulcer, respectively. In gastric secretion experiments, methanol extracts of Taheebo also showed significant inhibition of gastric juice secretion, acidity and acid output at doses 500 and 1,000mg/kg. These results may suggest that Taheebo shows antigastritic and antiulcerative action in rats in part by the inhibition of gastric juice secretion and acidity.

• Membrane Journal
• /
• v.19 no.2
• /
• pp.89-95
• /
• 2009

A comb-like copolymer consisting of a poly(vinyl chloride) backbone and poly(hydroxy ethyl acrylate) side chains, i.e. PVC-g-PHEA, was synthesized through atom transfer radical polymerization (ATRP). This comb-like copolymer was crosslinked with 4,5-imidazole dicarboxylic acid (IDA) via the esterification of the -OH groups of PHEA in the graft copolymer and the -COOH groups of IDA. Upon doping with phosphoric acid (PA, $H_3PO_4$) to form imidazole-PA complexes, the proton conductivity of the membranes continuously increased with increasing PA content. A maximum proton conductivity of 0.011 S/cm was achieved at $100^{\circ}C$ under anhydrous conditions. The PVC-g-PHEA/IDA/PA complex membranes exhibited good mechanical properties, i.e. 575 MPa of Young's modulus, as determined by a universal testing machine (UTM). Thermal gravimetric analysis (TGA) shows that the membranes were thermally stable up to $200^{\circ}C$.

• The Korean Journal of Mycology
• /
• v.10 no.4
• /
• pp.173-176
• /
• 1982

In cultivating the mushroom, there are important several mushroom diseases including Mildew disease, Didymocladium ternatum. Studies on some factors affecting growth of D. ternatum and its chemical control were carried out. The optimum temperature for mycelial growth of D. ternatum was $15{\sim}20^{\circ}C,$ lower than that of Agaricus bisporus. Infection was very severe when it was infected between at casing and at the end of the first flush. Mycelial thermal death occurred at $50^{\circ}C$ when it was treated for more than 20 minutes. For spore, $50^{\circ}C$ for 60 minutes and $60^{\circ}C$ for 20 minutes were required respectively as a thermal death point. Benlate, Homai and Dithane M-45 were selected as effective chemicals for controlling this disease.

• Korean Journal of Medicinal Crop Science
• /
• v.20 no.6
• /
• pp.461-465
• /
• 2012

This study was carried out to select the appropriate medium (especially, carbon and nitrogen source, potassium phosphate and pH) for somatic embryogenesis in order to develop the rapid mass production system in suspension culture of Oplopanax elatus Nakai. Direct somatic embryos were obtained from root explants in the hormone free suspension culture (MS). Combination of $NH_4NO_3$ and $KNO_3$ at the ratio of 1650 (mg/${\ell}$) : 1900 (mg/${\ell}$) obtained the better result to produce somatic embryo in suspension culture. MS medium supplemented with $170mg/{\ell}$ $KH_2PO_4$. The addition of 1 and 3% sucrose was effective for formation of embryogenic callus. Therefore, this report will be helped to improve the establishment for suspension culture in Oplopanax elatus Nakai.

• Applied Biological Chemistry
• /
• v.36 no.5
• /
• pp.364-369
• /
• 1993

Triton X-100 enhances to a marked extent the analytical sensitivity of the nitrobluetetrazolium (NBT) reduction method for the assay of superoxide$(O^-_{\.{^.2}})$ production. In the present work, it was attempted to elucidate the physicochemical nature of this Triton X-100 effect, focusing on not only the surfactant-caused stabilization of the water-insoluble formazan colloid but also the kinetic competition between the $NBT-O^-_{\.{^.2}}$ reaction and the autodisproportionation of concommitantly occuring in aqueous media. The measurements of formazan and $H_2O_2$ formed in a number of reaction systems, as prepared by vortex-mixing potassium superoxide dissolved in an aprotic solvent with aqueous solutions of NBT, revealed that Triton X-100 exerts its effect both through preventing formazan colloid from aggregation and thereby increasing the formazan absorbance and through suppressing the autodisproportionation reaction of $O^-_{\.{^.2}}$. It also turned out that the relative shares of the colloid stabilization effect and the kinetic effect in the contribution to the sensitivity amplification of the NBT method are dependent upon the reaction conditions, particulary the molar concentration ratio of NBT to $O^-_{\.{^.2}}$ in the reaction systems.

• Journal of Bio-Environment Control
• /
• v.10 no.3
• /
• pp.141-147
• /
• 2001

To compare to the optical and physical properties of covering materials for plastic greenhouse, EVA(ethylene vinyl acetate, 0.08 mm), polyorefine antifog (0.1 mm), fluoric (0.06 mm), diffused (0.15 mm), polyorefine antidrop (0.15 mm) and PET (polyethylene terephthalate, 0.5 mm) films were used. The small greenhouse (5.4$\times$18.5$\times$2.9 m, W$\times$L$\times$H) investigated during 3 years form 1997 to 1999. After covering materials were used for greenhouse covering during 30 months, UV (300-400 nm) transmittances of diffused film and PET were appeared from 25 to 26%, while those of fluoric film and the other films were 76% and from 63 to 67%. For PAR (photosynthetically active radiation, 400-700 nm), the transmittances of fluoric, antidrop, PET, antifog, EVA, and diffused film were 86.5%, 80.5%, 76.3%, 75.5%, 74.1% and 61.9% respectively. The losses of PAR transmittance of EVA and the antidrop film during period between 7 days and 30 months were higher value 12% and lower value 6% than any other film. Under the canopy of tomato plants, light intensities of the diffused film and the antifog film were 2.5 times and 1.4 times higher than those of PET. Tensile resistances of fluoric film at the break point were the higher than those of antifog film and diffused film. While impact resistance of the antidrop film was the highest value, but the fluoric film was the lowest. Air temperature inside the greenhouse for the day showed to be changed the similar light transmittance of the films. But the increasing order of air temperature for the night was PET, fluoric, antidrop, diffused, antifog and EVA film. Especially, air temperature in the PET was 4$^{\circ}C$ higher than that in the EVA. Solar radiations of the fluoric film, the antidrop film, PET and antifog film in the greenhouse were 32%, 15%, 11% and 4% higher than those of PET. However, those of the diffused film was 7% less than PET.

• Korean Journal of Materials Research
• /
• v.23 no.4
• /
• pp.240-245
• /
• 2013

Electrochemical surface treatment is commonly used to form a thin, rough, and porous oxidation layer on the surface of titanium. The purpose of this study was to investigate the formation of nanotubular titanium oxide arrays during short anodization processing. The specimen used in this study was 99.9% pure cp-Ti (ASTM Grade II) in the form of a disc with diameter of 15 mm and a thickness of 1 mm. A DC power supplier was used with the anodizing apparatus, and the titanium specimen and the platinum plate ($3mm{\times}4mm{\times}0.1mm$) were connected to an anode and cathode, respectively. The progressive formation of $TiO_2$ nanotubes was observed with FE-SEM (Field Emission Scanning Electron Microscopy). Highly ordered $TiO_2$ nanotubes were formed at a potential of 20 V in a solution of 1M $H_3PO_4$ + 1.5 wt.% HF for 10 minutes, corresponding with steady state processing. The diameters and the closed ends of $TiO_2$ nanotubes measured at a value of 50 cumulative percent were 100 nm and 120 nm, respectively. The $TiO_2$ nanotubes had lengths of 500 nm. As the anodization processing reached 10 minutes, the frequency distribution for the diameters and the closed ends of the $TiO_2$ nanotubes was gradually reduced. Short anodization processing for $TiO_2$ nanotubes of within 10 minutes was established.