• 환경위생공학
• /
• 제15권1호
• /
• pp.95-101
• /
• 2000

This study was investigated to the reaction of alumina sintering with alkaline. The soluble $NaAlO_2$ was made after the commercial ${\alpha}-Al_2O_3$ was calcinated with NaOH. The reaction of alumina was carried out to be based on the effects of calcination temperature, time, and the mixing ratio of ${\alpha}-Al_2O_3/NaOH$. The alumina was calcined over $500^{\circ}C$ with NaOH powder after it was sieved with 170/270 mesh. The calcined alumina with NaOH powder was dissolved into $25^{\circ}C$ distilled water and filtrated, and HCI was added to adapt pH 6.5~7.5. The residue was separated with vacuum pump for filtration after it was adapted to proper pH, and aluminum compound was precipitated with $Al(OH)_3$. The investigation was carried out with the variables; the calcination temperature($500-900^{\circ}C$), the calcination time (30~90 min), and the concentration of HCI when leaching(0.5~3.0N) respectively. In this investigation, the main product of ${\alpha}-Al_2O_3$ and NaOH was $NaAlO_2$ and the maximum conversion ratio was 91.4% under the optimum conditions as followed ; the ratio of NaOH/${\alpha}-Al_2O_3$ was 1.5 and the calcination conditions were $800^{\circ}C$ and 90 min.

• Advances in Energy Research
• /
• 제4권2호
• /
• pp.177-187
• /
• 2016

Ammonia borane $NH_3BH_3$ solubilized in organic solvent is a potential liquid-state chemical hydrogen storage material. In this study, metal acetylacetonates like $Fe(O_2C_5H_7)_3$, $Co(O_2C_5H_7)_2$, $Ni(O_2C_5H_7)_2$, $Pd(O_2C_5H_7)_2$, $Pt(O_2C_5H_7)_2$ and $Ru(O_2C_5H_7)_3$ are considered for assisting dehydrocoupling of ammonia borane in diglyme (0.135 M) at $50^{\circ}C$. The molar ratio between ammonia borane and metal acetylacetonate is fixed at 100. A protocol for the separation of the soluble and insoluble fractions present in the slurry is proposed; it consists in using acetonitrile to make the precipitation of metal-based compounds easier and to solubilize boron-based intermediates/products. The nature of the metal does not affect the dehydrocoupling mechanisms, the $^{11}B\{^1H\}$ NMR spectra showing the formation of the same reaction intermediates. The aforementioned metal acetylacetonates do mainly have effect on the kinetics of dehydrocoupling. Dehydrocoupling takes place heterogeneously and dehydrogenation of ammonia borane in these conditions leads to the formation of polyborazylene via intermediates like e.g., B-(cyclodiborazanyl) amine-borane and borazine. Our main results are reported and discussed herein.

• 한국세라믹학회지
• /
• 제19권2호
• /
• pp.127-132
• /
• 1982

This experiment has been carried out for the purpose of investigating the effect of additives on densification and grain growth in magnesium oxide by a two-step process; hot pressing and heat treating. MgO powder has been obtained by calcining extra reagent grade MgCO3 at 90$0^{\circ}C$ for 30 minutes, and additives have been added to $MgCO_3$ in the form of soluble salts-Al$(NO_3)_3$$. $9H_2O$ and $Cr(NO_3)_3$.9H_2O$. The hot pressing has been carried out with changes of soaking time at 125$0^{\circ}C$ under the pressure of 250kg/$\textrm{cm}^2$, and the heat treating also at same temperature. The initial particle size of MgO measured by particle size analyzer was 0.86 microns. Densification rate obeyed the equation D=K lnt + C, and grain growth rate obeyed the equation G-G0=kt1/2. It was vaporization of some $Cr_2O_3$ and formation of solid solution that had an influence on desification of MgO containing $Cr_2O_3$. Activation energy for grain growth of pure MgO was 62.4 kcal/mole, therefore grain growth was supposed to be diffusioncontrolled process. But after heat treatmeat, excess additives were expected to slow down the grain growth by the formation of second phase or the solute atoms at grainboundary.

• Journal of Electrochemical Science and Technology
• /
• 제2권2호
• /
• pp.76-84
• /
• 2011

Potentiostatic oxidation of Pb-1.7%Sb alloy used in the manufacture of grids of lead-acid batteries over the potential range from -1.0V to 2.3V in 5M $H_2SO_4$ in the absence and the presence of 0.4M $H_3PO_4$ and the self-discharge characteristics of the oxide layer formed is studied by electrochemical impedance spectroscopy (EIS). Depending on the potential value, sharp variations in resistance and capacitance of the alloy are recorded during the oxidation and they can be used for identification of the various substances involved in passive layer. Addition of $H_3PO_4$ is found to deteriorate the insulating properties of the passive layer by the retardation of the formation of $PbSO_4$. $H_3PO_4$ completely inhibits the current and impedance fluctuations recorded in $H_3PO_4$-free solutions in the potential range 0.5 V-1.7 V. These fluctuations are attributed to the occurrence of competitive redox processes that involve the formation of $PbSO_4$, $PbOSO_4$, PbO and $PbO_2$ and the repeated formation and breakdown of the passive layer. Self-discharge experiments indicate that the amount of $PbO_2$ formed in the presence of $H_3PO_4$ is lesser than in the $H_3PO_4$-free solutions. The start of transformation of $PbSO_4$ into $PbO_2$ is greatly shortened. $H_3PO_4$ facilitates the diffusion process of soluble species through the passive layer ($PbSO_4$ and basic $PbSO_4$) but impedes the diffusion process through $PbO_2$.

• Bulletin of the Korean Chemical Society
• /
• 제33권12호
• /
• pp.4028-4034
• /
• 2012

Tris(2-phenylphenoxo)aluminum ($(2-PhC_6H_4O)_3Al$) exists as a dimeric form in toluene. When toluene-insoluble anhydrous cobalt acetate is treated with tris(2-phenylphenoxo)aluminum in toluene, the toluene-soluble adduct $(2-PhC_6H_4O)_3Al{\cdot}Co(OAc)_2$ is formed. The 2-phenylphenoxo ligand in the adduct can be replaced with another aryloxo ligand to give (aryloxo)$(2-PhC_6H_4O)_2Al{\cdot}Co(OAc)_2$ (aryloxo = 2-methylphenoxo, 2-isopropylphenoxo, 4-methylphenoxo, 4-isopropylphenoxo, or 4-tert-butylphenoxo). These complexes are active for butadiene polymerization without gel formation when activated with an equivalent amount of $(2-PhC_6H_4O)AlEt_2$ for 2 h. The highest activity, 175 kg/mol-Co (turnover number, 3200) was achieved with $(2-PhC_6H_4O)_3Al{\cdot}Co(OAc)_2$ at $65^{\circ}C$ for 2 h. The microstructure of the polymer chains is mostly trans-1,4-configuration (70-75%) with the remaining being 1,2-vinyl. The cis-1,4-configuration observed by IR is minimal (1-5%). By replacing the 2-phenylpheoxo with a 4-alkylphenoxo ligand, the amount of 1,4-configuration slightly increases, resulting in increase in the endothermic melting signal at $-30{\sim}50^{\circ}C$ in the DSC curve. The molecular weights of the polymers are high ($M_n$: 300000~800000) with a fairly narrow molecular weight distribution ($M_w/M_n$, 2.0-2.7).

• 공업화학
• /
• 제10권5호
• /
• pp.666-671
• /
• 1999

본 연구에서 술폰화된 poly(phenylene sulfide)(SPPS)는 10%의 발연황산으로 PPST를 술폰화한 후 NaOH 수용액으로 demethylation하여 제조하였다. 유기용매에 용해되는 PPST는 methyl-(phenylthio)phenyl sulfoxide(MPPSO)의 자가축합 반응으로 합성되었다. SPPS는 $1200cm^{-1}$에서 $-SO_{3}H$의 비대칭 O=S=O 신축진동에 의한 흡수피크와 $621cm^{-1}$에서 S-O 신축진동에 의한 흡수피크가 관찰된 것으로 보아 술폰산기가 도입된 것을 알 수 있다. PPST의 술폰화를 $150^{\circ}C$에서 12시간 반응했을 때 반복단위당 1.48개의 술폰산기가 도입되었으며, 고온 GPC로 측정된 PPST와 SPPS의 중량평균분자량(Mw)은 각각 118323과 131204이었다. SPPS의 암모니아 가스 흡착능은 $9.67mmol\;NH_{3}/g$이었고, 활성탄, 실리카겔보다 월등히 높았다.

• 자원리싸이클링
• /
• 제10권5호
• /
• pp.36-43
• /
• 2001

The chlorine component in fly ash from municipal solid waste incineration ash was removed by water washing for the purpose of recycling fly ash as a raw material of ordinary portland cement. The samples were a different kind of 리y ashes using $Ca(OH)_2$and NaOH as media of wet scrubber for flue gas cleaning. The content of soluble salts of fly ash using $Ca(OH)_2$and NaOH was 32.8%, 50.1% and the content of chlorine component, 22.9% and 26.0% respectively, which was KCl, NaCl, CaC1OH mainly. When each fly ash was washed using water under conditions of a agitation speed of 300 rpm, a liquid to solid ratio of 10, most soluble salts in fly ash were dissolved within 30 minutes and the content of chlorine component in ash was diminished to the content of 4.4%, 2.O% at $20^{\circ}C$ and 1.7%, 0.8% at $50^{\circ}C$ respectively. And the main compound of residual chlorine component in ash after water washing was friedel`s salt ($3CaO.A1_2$$O_3$.$CaCl_2$.$10H2$O). From analysis results of water quality for wastewater by water washing, the components exceeding discharged wastewater standard were only Pb and Cd. But As pH was controlled to 10 with addition of $CO_2$(g) or $Na_2$$_CO3$in water, the concentration of heavy metals such as Pb and Cd was also under discharged wastewater standard.

• KSBB Journal
• /
• 제14권2호
• /
• pp.167-173
• /
• 1999

A new synthetic medium was developed for the submerged mycelial cultures of Phellinus linteus. The medium for maximum mycelial growth of Phellinus linteus (3 days incubation, 28$^{\circ}C$, pH 5) consisted of (per 1 L): glucose, 90 g peptone, 10 g soluble starch, 10 g yeast extract, 3 g KH2PO4, 1 g MgSO4.7H2O, 1 g and CaCl2, 0.1 g. The concentrations of glucose, peptone, yeast extract, KH2PO4, MgSO4.7H2O, and CaCl2 were examined in the ranges of 10~90 g/L, 0~10 g/L, 0~15 g/L, 0~2 g/L, 0~1 g/L, and 0~0.5 g/L, respectively. The dry weight of mycelium in 3 days increased to 16.79 mg/mL using the new synthetic medium. The optimum temperature for mycelial growth of Phellinus linteus was 28$^{\circ}C$. The concentrations of KH2OP4, CaCl2, and yeast extract, which gave the maximum mycelial growth of Phellinus linteus, existed in the concentration ranges examined in this study. But, in the cases of other compositions (MgSO4.7H2O, peptone, and glucose), the mycelial growth of Phellinus linteus increased with the concentration in the ranges.

• Journal of Forest and Environmental Science
• /
• 제22권1호
• /
• pp.13-17
• /
• 2006

오동나무잎, 열매, 내수피, 외수피 그리고 목질부를 채취하여 건조시킨 후 분말로 제조하여 각 시료 약 5.0 kg을 아세톤-물(7:3. v/v) 혼합용액으로 추출하고 유기용매를 제거한 후 헥산, 메틸렌클로라이드, 에틸아세테이트 및 물 등 네 개의 분획으로 분리하였다. 오동나무 각 부위별 추출물 수율은 내수피(11.35%)가 가장 높았고 잎(7.87%), 열매(6.94%), 외수피(4.24%)의 순 이었으며 목질부가 4.10%로 가장 낮게 나타났다. 오동나무 각 부위별 조추출물, 고형분과 분획물을 가지고 DPPH radical 소거법을 이용하여 기초적인 항산화 실험을 실시하였다. 기준물질로는 천연 항산화제인 ${\alpha}$-tocopherol과 합성항산화제인 BHT를 사용하여 항산화효능을 비교하였다. 그 중에서는 모든 EtOAc용성 분획이 기준물질 보다 더 우수한 항산화 활성을 나타내었다.

• Journal of the Korean Wood Science and Technology
• /
• 제44권4호
• /
• pp.559-570
• /
• 2016

The EtOAc and $H_2O$ soluble fractions of Katsura tree (Cercidiphyllum japonicum Sieb. Et Zucc) bark extracts were chromatographed on a Sephadex LH-20 column with various aqueous MeOH. Gallic acid (1), methyl galate (2), kurigalin (3), 1,2,3,6-tetra-O-galloyl-${\beta}$-D-glucose (4) and 1,2,3,4,6-penta-O-galloyl-${\beta}$-D-glucose (5) were isolated from EtOAc fraction. Isocorilagin (6) and methyl galate (2) were separated from $H_2O$ fraction. The structure determination was done by $^1H$ and $^{13}C$ NMR. Of these isolated compounds, methyl galate (2), kurigalin (3) and isocorilagin (6) were isolated, for the first time, from the bark extracts of Cercidiphyllum japonicum.