• Journal of the Korean Ceramic Society
• /
• v.41 no.3
• /
• pp.197-201
• /
• 2004

SiO$_2$ and SiON thick films were deposited by Plasma Enhanced Chemical Vapor Deposition (PECVD) technique on silicon wafer (100) using SiH$_4$ and $N_2$O as precursor gases. In this work, the influence of rf power, and rf bias power on the optical and physical properties of SiO$_2$ and SiON thick films is presented. The refractive index decreases with increasing rf power, and rf bias power. The refractive index of the films varied from 1.4493 to 1.4952 at wavelength at 1552 nm, with increasing rf power, the nitrogen content decreases while the oxygen content increases, in a manner that the O/N ratio increases approximately linearly.

• Journal of the Mineralogical Society of Korea
• /
• v.16 no.3
• /
• pp.245-254
• /
• 2003

Stishovite was synthesized from hydrous basaltic starting materials at 10∼15 ㎬ and $1000∼1400^{\circ}C$. Water content of synthetic stishovite has been determined, and solid solution mechanism of $H_2$ and Al in stishovite was investigated. The maximum water content obtained from stishovite single crystal was up to $844\pm$44 ppm $H_2$O. The concentration of hydrogen increased with increasing substitution of trivalent cation, mainly Al. The temperature effect on the hydrogen content in stishovite is more sensitive than that on any other impurities. Among the nominally anhydrous mantle-minerals, stishovite could be an important water-containing phase and contribute to the transportation of $H_2$O to lower mantle.

• Journal of Korea Foundry Society
• /
• v.5 no.4
• /
• pp.271-282
• /
• 1985

In order to investigate the mold reaction characteristics of Mn steel and Cr steel castings individually, the mold reaction products were examined by scanning electron microscopy, electron prove microanalyzer and X-ray diffractometer. From this experiment, the results were summarized as follows: 1) The mold reaction depth increased with increase of Mn content, while it decreased with increase of Cr content. 2) Mold reaction depth decreased with Mn content at $1200^{\circ}C$. 3) Mn, among the reaction products, forms a low fusion silicate, Mn $O.SiO_2$ while Cr forms a stable oxide, $CrO_3$ which hindering the reaction between FeO and $SiO_2$ thus the formation of $FeO.SiO_2$ was depressed.

• Journal of the Korean Ceramic Society
• /
• v.28 no.8
• /
• pp.635-639
• /
• 1991

Monolithic gels in the ZrO2-SiO2 system containing up to 30 mol% ZrO2 were prepared from the mixed solutions of Zr(O.nC3H7)4 and partially prehydrolyzed Si(OC2H5)4 (Tetraethyl orthosilicate) by the sol-gel method. The effect of parameters such as the hydrolysis temperature, the amount of water and HCl on the hydrolysis condensation process was investigated and the obtained gels were studied by the IR spectra and TG-DTA. The results showed that the gelation time becomes shorter with increasing content of HCl, H2O and gelation temperature, and that the polymerization was more easily completed with the higher water volume causing the elimination of unreacted organic groups.

• Transactions on Electrical and Electronic Materials
• /
• v.17 no.4
• /
• pp.204-207
• /
• 2016

Experimental study of UV-irradiated O₂/H₂ gas phase cleaning for PMMA (Polymethylmethacrylate) removal is carried out in a load-locked reactor equipped with a UV lamp and PBN heater. UV enhanced O₂/H₂ gas phase cleaning removes polymethylmethacrylate (PMMA) better at lower process pressure with higher content of H₂. O₂ gas compete for UV (184.9 nm) absorption with PMMA producing O₃, O(¹D) and lower dissociation of PMMA. In our experimental conditions, etching reaction of PMMA at the substrate temperature between 75℃ and 125℃ had activation energy of about 5.86 kcal/mol indicating etching was controlled by surface reaction. Above the 180℃, PMMA removal was governed by a supply of reaction gas rather than by substrate temperature.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.5
• /
• pp.810-816
• /
• 1996

This study was conducted to measure the hydration characteristics at $20^{\circ}C$ and investigated the effect of water to rice ratio(v/w) on the texture properties of cooked rice of ten different varieties based on maturity. Water absorptions during soaking were completed between 30min and 35min at $20^{\circ}C$. The ranges of equilibrium moisture content were between 0.3247g $H_2O/g$ dry matter and 0.3577g H201g dry matter. During the cooking process, the water content of cooked rice increased 6~7% with increased the ratio of water to rice from 1.4 to 1.6(v/w). The hardness(H) of cooked rice decreased, while the stickiness(-H) and -H/H ratio increased with increased ratio of water to rice.

• Horticultural Science & Technology
• /
• v.34 no.3
• /
• pp.383-395
• /
• 2016

This study investigated the effect of exogenous hydrogen peroxide ($H_2O_2$) on the antioxidant responses and growth of warm-season turfgrass (Zoysia japonica Steud.) and cool-season turfgrass (Poa pratensis L.) subjected to drought stress. Compared with control plants that were not pretreated with $H_2O_2$, plants pretreated with $H_2O_2$ had significantly greater fresh and dry weights of shoots and roots, and increased water content. $H_2O_2$ pretreatments before drought stress significantly decreased the concentrations of malondialdehyde and $H_2O_2$. DPPH radical scavenging and glutathione activities were significantly increased. The responsive activities of the antioxidant enzymes superoxide dismutase, ascorbate peroxidase, catalase, and peroxidase were also significantly enhanced. Our results suggest that exogenous $H_2O_2$ could improve the growth of warm-season and cool-season turfgrass under drought stress by increasing the activity of their antioxidant enzymes, while decreasing lipid peroxidation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.739-743
• /
• 2003

[ $Ba_2NaNb_5O_{15}$ ], hereafter BNN, thin films are attractive candidates for nonvolatile memory and electro-optic devices. In the present work, thin films that have different contents of Ba, Nb and Na have been prepared by H-MOD technique on silicon and Pt substrates. XRD and SEM were used to investigate the phase evolution behavior and the microstructure of the films. It was found that the films of about 500nm thick were crack-free and uniform in microstructure. Nb content strongly influenced the phase formation of the films, where unwanted phases were always formed at the stoichiometric BNN composition. However, the unwanted phases decreased with the increase of excess Nb content, and the single phase (tetragonal tungsten bronze structure) BNN thin film was obtained when the niobium content reached some point. From this study, the sub-solidus phase diagram below $850^{\circ}C$ for $BaO-Na_2O-Nb_2O_5$ ternary system is proposed.

• Korean Chemical Engineering Research
• /
• v.50 no.4
• /
• pp.654-658
• /
• 2012

In this study, $CO_2$ capture efficiency in relation to the inlet moisture content of the regenerator was investigated using potassium-based sorbents in the continuous process composed of two bubbling fluidized-bed reactors, where solid outlet configuration in the regenerator was converted from underflow to overflow. XRD (X-ray Diffraction), SEM (Scanning Electron Microscope) and TGA were performed to find out the effect of water pre-treatment according to inlet moisture content in the regenerator. The $K_2CO_3{\cdot}1.5H_2O$ structure of solid sorbents has been increased as inlet moisture content of the regenerator increased. As a result, the $CO_2$ capture efficiency increased as the $K_2CO_3{\cdot}1.5H_2O$ structure of solid sorbents increased since the reactivity of the sorbents has been improved by that structure generated by the water pre-treatment. And $CO_2$ capture efficiency increased about 3~8% after sorbent outlet configuration of the regenerator was changed underflow to overflow.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.4
• /
• pp.379-385
• /
• 1987

A field experiment was conducted to find out the effects of liming (soil pH) and sources of N on the chemical constituents of soil and leaf lamina of burley tobacco. Treatments consisted of liming (nonliming, liming to soil pH 5.5 and 6.5) as the main plot and N sources［compound fertilizer of containing 3.9% $NH_4-N$ and 6.1% $NH_2-N,\;NaNO_3,\;(NH_2)_2CO\;and\;(NH_4)_2SO_4$］as the sub-plot. The soil pH was high in $NaNO_2$ plot, while low in $(NH_4)_2SO_4$. But the differences of Ca concentration in top soil among N sources were not detected. The $NO_3-N$ concentration in top soil was high in high limed and $NaNO_3$ plot. The $NO_3-N$ content of leaf (lamina) at 75 days after transplanting was high in $NaNO_3$ plot and CaO con-tent of leaf at 45 days after transplanting was high in high limed plot. But neither liming nor N source had effect on the contents of total nitrogen, $P_2-O_{5}\;and\;K_2O$ of leaf during growing season. There was no significant differences in total alkaloid and total nitrogen contents of cured leaf (lamina) to liming and N source. But when the source of N was $NaNO_3$, the content of total alkaloid was increased by adding lime. When the source of N was $(NH_4$)_2SO_4$, the content of $K_2O$ in cured leaf was high while CaO was low. But neither liming nor N source had effect on the contents of $P_2-O_{5}$ and MgO in cured leaf.