• Food Science and Preservation
• /
• v.16 no.6
• /
• pp.977-984
• /
• 2009

Campbell Early grapes, the major grape variety in Korea, contain 13 - 15% (w/v) sugar, which is lower than that appropriate for fermentation of red wine. Therefore, chaptalization with sucrose is usually used to increase the sugar level to an extent adequate to produce a wine containing about 12% (v/v) alcohol. In the present study, fermentation of freeze-concentrated Campbell Early grape juice at $25^{\circ}Brix$ was investigated using several industrial wine yeasts including Saccharomyces cerevisiae OC2, S. cerevisiae Fermivin, and S. cerevisiae W-3. During fermentation, changes in the levels of soluble solids, alcohol, total acid, and yeast viable counts were investigated. Alcohol content reached maximal levels after 9 days of fermentation, and was 12.6% (v/v) when the Fermivin strain was used and 13% (v/v) when each of the OC2 and W-3 strains was used. No significant between-strain difference was found, except for slightly slower alcohol production and sugar consumption, and a higher total acid content when strain OC2 was used. Changes in the yeast viable counts were similar during fermentation. The physicochemical characteristics of Campbell Early wine prepared using freeze-concentrated juice were investigated by measuring the levels of total phenolic compounds, organic acids, acetaldehyde, and minor alcohols and assessment of color values. Similar levels of soluble solids and total phenolic contents were observed in wines fermented by the three different strains, but a higher level of total acid was noted in OC2-fermented wine and a lower level of alcohol in Fermivin-fermented wine. The highest level of malic acid and the lowest level of lactic acid were detected in Fermivin-fermented wine. Although the wines showed variable levels of acetaldehyde and minor alcohols, the concentrations of these materials were much lower than those mandated by legal regulations promulgated by the Korean National Tax Service. Red and violet colors in OC2-fermented wine were darker than those of W-3-fermented wine. In sensory evaluation, W-3-fermented wine obtained the highest scores for color and flavor. However, the best taste score was reported for the OC2-fermented wine, whereas Fermivin-fermented wine was awarded the highest score in overall acceptance.

• Journal of Embryo Transfer
• /
• v.19 no.3
• /
• pp.201-208
• /
• 2004

This study was performed to examine the effects of catalase and $\beta$-mercaptoethanol ($\beta$ME) on the establishment of clonal lines from porcine fetal fibroblast cells. Fibroblasts derived from a pig fetus (Day 50) were passaged two times before use. A single cell was seeded in 96-well plates and cultured in medium supplemented with or without catalase or $\beta$ ME. Cell colonies were passaged two times into 4-well dish. Cell lines with proliferating potential were classified as an established clonal cell line. In experience 1, the establishment efficiencies were examined by addition of catalase (100ng/$m\ell$) or $\beta$ME (100 uM) in culture medium. The establishment efficiency of $\beta$ME-added group (8.3％) was significantly higher than that of control group (3.2％, P<0.05). However, catalase did not have a positive efffct on the establishment efficiency. In experience 2, the establishment efficiencies were examined by addition of different concentrations of catalase (0-1,000 ng/$m\ell$) in culture medium. However, establishment efficiencies were not different among the different concentrations of catalase (0-2.6％). In experience 3. the establishment efficiencies were examined by addition of different concentrations of $\beta$ME(0-1,000 uM) in culture medium. The establishment efficiency was significantly higher in 100 uM $\beta$ME-added group (9.4％) compare to others (0-1.6％). The result of present study shows that the establishment efficiency of clonal cell lines can be enhanced by the culture in media supplemented with 100uM $\beta$ME. However, catalase did not have a positive effect on the establishment efficiency.

• Journal of Animal Science and Technology
• /
• v.45 no.3
• /
• pp.355-368
• /
• 2003

In Exp. 1, this study was conducted to determine the effect of dietary germanium biotite on growth performance and nutrient digestibility in nursery pigs. A total of sixty crossbred pigs (initial body weight 15.09$\pm$0.18kg) were used in this experiment. This study was carried out for 28 days. The five treatments were control (CON; basal diet), GB0.1 (basal diet + germanium biotite 0.1%), GB0.3 (basal diet + germanium biotite 0.3%), GB0.6 (basal diet + germanium biotite 0.6%) and GB1.0 (basal diet + germanium biotite 1.0%). For overall period, ADG and Gain/feed were not significantly different among the treatments. In Exp. 2, a study was conducted to evaluate the effect of germanium biotite as a substitute for antibiotics in growing pigs. A total of fifty five crossbred pigs (initial body weight 32.47$\pm$0.9kg) were used in this experiment. The three treatments were negative control (NC: basal diet without antibiotic), positive control (PC: basal diet + 200ppm CTC) and GB0.3 (basal diet + germanium biotite 0.3%). Pigs fed PC (17%, 385 vs 451 g/d) and GB0.3 (14%, 385 vs 438 g/d) diets grew faster(P<0.05) than pigs fed NC diet. Pigs fed PC and GB0.3 diets resulted higher(P<0.05) ADFI than pigs fed CON diet. However, pigs fed GB0.3 diet had improved gain/feed compared to pigs fed NC diet(P<0.05). Apparent digestibility of DM and N by pigs fed PC and GB0.3 diets were greater(P<0.05) than those by pigs fed NC diet. In Exp. 3, a study was conducted to determine the effect of dietary germanium biotite on growth performance, plasma characteristics, backfat thickness and fecal ammonia gas concentration in finishing pigs. A total of seventy-two finishing pigs (initial body weight 78.56$\pm$1.32kg) were used in this experiment. The treatments included 1) Control (CON; basal diet) 2) GB1.0 (basal diet + germanium biotite 1.0%), 3) GB3.0 (basal diet + germanium biotite 3.0%). Pigs fed GB1.0 diet grew faster than pigs fed CON diet and GB0.3 diet (P<0.05). Also, pigs fed CON diet showed higher(p<0.05) ADFI than pigs fed GB3.0 diet. Pigs fed GB diets had improved gain/feed compared to pigs fed CON diet(P<0.05). Total?and VLDL concentrations in plasma of pigs fed GB diets treatments were significantly decreased compared to those in pig fed CON diet(P<0.05). However, HDL-cholesterol concentration in plasma of the pig was significantly increased compared to those in pigs fed CON diet (P<0.05). Pigs fed CON diet exerted higher(P<0.05) backfat thickness than pigs fed GB1.0 (5.4%, 27.19 vs 25.71mm) and GB3.0 (16.1%, 27.19 vs 22.81mm) diets. Feces from CON treatment were higher in fecal ammonia gas concentration than faces from pigs fed GB1.0 (64.1%, 17.00 vs 6.10mg/kg)and GB3.0 (61.8%, 17.00 vs 6.50mg/kg) treatments(P<0.05). In conclusion, the results suggest that the dietary addition of germanium biotite into diets for nursery pigs did not affect growth performance. The results also suggest the possibility of germanium biotite to replace antibiotic in diets for growing pigs. In finishing pigs, dietary supplementation of germanium biotite was an effective means for improving growth performance and for decreasing Total-and LDL+VLDL-plasma cholesterols, backfat and fecal ammonia gas concentration.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.24 no.1
• /
• pp.11-24
• /
• 1979

To characterize elastic and plastic chilling injury, rice seedlings grown at 28/$16^{\circ}C$ day/night temp. under 20K lux (13hrs.) in a phytotron were subjected to a 11/$6^{\circ}C$, 20K lux condition for 2, 4, 6 or 8 days at 1, 2, 3, 4 or 5th leaf-stage, respectively, followed by further growth under 28/$16^{\circ}C$condition till 30th day after seeding. Japonica variety Jinheung and Chulwon No.1 survived almost 100% without any significant , discoloration and death of leaves due to chilling even under the chilling of 8 days at all seedling ages tested. Tongil and Yushin, varieties from Indica x Japonica cross, showed increasing discoloration of leaves and death of plants with increase in chilling intensity. The longest chilling duration shown seedling death less than 5% was 4, 6, 1, 4, 8 days for Tongil, and 6, 6, 1, 2, 2, days for Yushin at 1, 2, 3, 5th leaf-stage, respectively. The degree of discoloration and death of leaves or suppression of height growth was not explicitly related to seedling death or the dry weight reduction. The degree of seedling death or dry weight reduction could differentiate chilling tolerance of varieties and seedling ages, but somewhat differently. Reduction in dry weight due to chilling occurred even without any visible injury or seedling death. These suggest that both the degree of seedling death and reduction in dry weight should be considered in the test of varieties for chilling tolerance. Combined evaluation of seedling death and dry weight reduction indicated the most susceptible seedling age to chilling injury to be 1 to 2nd leaf-stage for Jinheung, 2 to 3rd leaf-stage for Chulwon No.1, 3rd leaf- stage for Tongil and Yushin, respectively.

• Culinary science and hospitality research
• /
• v.22 no.2
• /
• pp.115-124
• /
• 2016

The purpose of this paper is to verify improvement of the basic quality of food resources and make the pork legs as the more advanced food products after taking special processing steps with the mixture of traditional medical herbs and hot water extracted coffee meal. The pH level of the pettitoes(Jokbal) showed the highest rate among the control group but it showed no statistical differences in the moisture content between the control and the pettitoes(Jokbal) processed with coffee waste extract as an additional component. In addition, the levels of crude fat and crude ash showed slight increases as the addition of the amount increase. In case of the proteins, however, tendency of slight was decreased but it was not significantly difference as the amount increases. The sodium rate in the pettitoes(Jokbal) was higher in the additional group than in the control group. Texture analysis showed a tendency of wide decrease in the hardness and chewiness depending on amount of the added coffee waste extract. On the other hand, as for the cohesiveness and springiness, there was no significant difference with the control group. In case of the lightness value, as the amount of added coffee waste extract is increased from 10% to 20% and 30%, the 'L' value was reduced significantly compared to that of the control. And the 'a' value was not significantly different compared to the coffee waste extract foil impregnated furniture control. But the 'b' values were significantly increased in accordance with the result of increasing the amount of control is at the lowest level. The result may come from the influence of coffee waste extract, which affects the color of the pettitoes(Jokbal). According to the sensory evaluation, the pork part with 10% of coffee waste extract showed the highest score in looking, chewiness, smell and preference, resulting in the improvement in quality of the pettitoes(Jokbal).

• Korean Journal of Weed Science
• /
• v.11 no.1
• /
• pp.60-67
• /
• 1991

The experiment was conducted to evaluate weeding effect and to inhibit tuberization of Eleocharis kuroguwai authority by single or systematic applications of several herbicides. E. kuroguwai was controlled above 90 percentage by pretilachlor and butachlor+bensulfuron application at 5-10 DAT(Days after transplanting) followed by bentazon at 50 DAT and weeded 88 percentage by mefenacet+bensulfuron application at 15 DAT. Tuberization inhibition rate of E. kuroguwai was higher at the application of butachlor+bensulfuron at 5 DAT followed by bentazon at 50 DAT than any other applications. The weight variation of E. kuroguwai tubers formed at 15-20cm soil stratum was larger than that at 10-15cm. Tuber of E. kuroguwai was hardly formed at top soil stratum (0-5cm) and deep soil (15-20cm) by the systematic application of bentazon at 50 DAT. Grain yield of rice from systematic application with bentazon at 50 DAT and mefenacet+bensulfuron at 10-15 DAT was similar to that of hand weeded plot.

• Journal of Technologic Dentistry
• /
• v.25 no.1
• /
• pp.41-62
• /
• 2003

In this research, we manufactured the paste opaque porcelains using Propylene Glycol (PG) and Buthylene Glycol (BG) as a solvent, and compared the composition of solvents, the coefficient of thermal expansion, the particle size distribution, the viscosity and bonding strength to metal, and the tone with those of the commercial products(Duceram Plus, Duceram GmbH; VMK 95, Vita Co.; Noritake EX-3, Noritake Co.)used in the clinical field. The results of the research were as follows: 1. The result of solvent analysis indicated that the solvents included in the paste opaque porcelains of the control group were mainly composed of Glycols. 2. From the Coefficient of thermal expansion measurement, we drew out the following results; testing group: $14.0\times10^{-6}/^{\circ}C$, Duceram Plus: $13.9\times10^{-6}/^{\circ}C$, VMK 95: $14.3\times10^{-6}/^{\circ}C$, and Noritake EX-3: $13.3\times10^{-6}/^{\circ}C$. 3. Seen from the result of particle size distribution measurement, the experimental group was similar to the control group in 1$\mu m$ below, but the experimental group marked the highest distribution of 61% in the case of between 1$\mu m$ and 5$\mu m$. Between 5$\mu m$ and 10$\mu m$, they showed relatively similar distribution, and Noritake EX-3 was turned out the highest distribution of 29% in 10$\mu m$ above. 4. From the result of viscosity measurement, Duceram plus showed the highest viscosity throughout all the measurements followed by Noritake Ex-3, experimental group and VMK 95 in decreasing order. 5. The result of bonding strength measurement was EX 35.53 $\beta\acute{A}$, DU 40.88 $\beta\acute{A}$, VM 39.43 $\beta\acute{A}$, and NO 35.39 $\beta\acute{A}$, and no significant difference was found between the experimental group and the control groups(P>0.05). 6. The measurement of the tone indicated that the $L^*$ value of the experimental group was 86.89 0.63 in average, which is higher than the control group in its brightness. In the case of the $a^*$ value, Duceram Plus, VMK 95 and EX-3 showed positive value, whereas the testing group was turned out negative value. In $b^*$ value, Duceram Plus proved the highest. From the results of this research, the paste opaque porcelains using Propylene Glycol (PG) and Buthylene Glycol (BG) as a solvent did not make differences from the commercial products that are actually used in the clinical fields. Therefore, it is possible to utilize Propylene Glycol (PG) and Buthylene Glycol (BG) for the paste opaque porcelains of P.F.M crown. It is also recommended that further researches concerning the compositions and forms of powder, the types of organic solvent components and the ratio of mixture proceeded in order to improve the level of productivity in the future.

• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.6
• /
• pp.692-696
• /
• 1998

An experiment was conducted with eight growing sheep (average initial weight 20.6 kg and average final weight 23.7 kg) in a $4{\times}4$ Latin square design to study the effect of type of forage supplementation to a basal diet of rice straw (ad libitum) and cassava (Manihot esculanta, approximately 9 g of dry matter $(DM).kg^{-0.75}{\cdot}day^{-1}$) on voluntary intake, digestion, rumen microbial protein synthesis and daily weight gain. Forages used were Leucaena (L, Leucaena leucocephala), Gliricidia (G, Gliricidia maculata) and Tithonia (T, Tithonia diversifolia, wild sunflower) at a DM supplementation level of approximately $13g.kg^{-0.75}.day^{-1}$. Organic matter intake was 40.4, 55.5, 55.0 and $54.9g{\cdot}kg.^{-0.75}{\cdot}day^{-1}$ for control (C, ad libitum straw and cassava), L, G and T. respectively, significantly lower for C than for the supplemented diets. Intake of supplementary forage had also a significantly positive effect on voluntary rice straw intake. All forage supplemented diets showed a significantly higher whole diet organic matter digestion than C ($488g{\cdot}kg^{-1}$), while T ($557g{\cdot}kg^{-1}$) differed significantly from L ($516g{\cdot}kg^{-1}$) but not from G ($526g{\cdot}kg^{-1}$). Daily weight gain was -1.7, 5.2, 5.4 and $4.7g{\cdot}kg^{-0.75}$, for C, L, G and T. respectively, significantly lower for C than for the forage-supplemented diets. Efficiency of microbial protein synthesis estimated from urinary excretion of purine derivatives was lower for C (3.8 g microbial N. (kg digestible organic matter intake $(DOMI))^{-1}$ than for the forage supplemented diets (11.3, 9.0 and 9.4 g microbial $N.(kg\;DOMI)^{-1}$ for L, G and T. respectively).

• Korean Journal of Soil Science and Fertilizer
• /
• v.3 no.1
• /
• pp.61-66
• /
• 1970

This study examined the morphology and physical and chemical characteristics of the Changpyeong series developed on gently sloping to rolling relief on dissected old paddiplains and terraces. This soil has dark brown silty clay loam A horizons, very thick dark red to red silty clay or clay Bt horizons, and C horizons of old alluvial materials frequently with strongly weathered round cobbles and pebbles. It is strongly acid with a low organic matter content, relatively low in cation exchange capacity, but with relatively high base-status based on amount of extractable cations. There is no obvious changes in particle size distribution with depth and textural B horizons probably have not been formed by podzolization but formed by mechanical movement of clay. This soil is classified as Typic Hapludalfs in USDA 7th approximation and Brunic Luvisols in FAO classification system.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.3
• /
• pp.116-126
• /
• 1993

The finite element method(FEM) has been commonly used for structural dynamic analysis. However, the direct global application of FEM to large complex structures such as ships and offshore structures requires considerable computational efforts, and remarkably more in structural dynamic optimization problems. Adoption of the component-mode synthesis method is an efficient means to overcome the above difficulty. Among three classes of the component-mode synthesis method, the free-interface mode method is recognized to have the advantages of better computational efficiency and easier implementation of substructures' experimental results, but the disadvantage of lower accuracy in analytical results. In this paper, an advanced method to improve the accuracy in the application of the free-interface mode method for the vibration analysis of large complex structures is presented. In order to compensate the truncation effect of the higher modes of substructures in the synthesis process, both residual inertia and stiffness effects are taken into account and a frequency shifting technique is introduced in the formulation of the residual compliance of substructures. The introduction of the frequency shrift ins not only excludes cumbersome manipulation of singular matrices for semi-definite substructural systems but gives more accurate results around the specified shifting frequency. Numerical examples of typical structural models including a ship-like two dimensional finite element model show that the analysis results based on the presented method are well competitive in accuracy with those obtained by the direst global FEM analysis for the frequencies which are lower than the highest one employed in the synthesis with remarkably higher computational efficiency and that the presented method is more efficient and accurate than the fixed-interface mode method.