• Bulletin of the Korean Chemical Society
• /
• 제30권3호
• /
• pp.675-678
• /
• 2009

$Fe_2O_3,\;Ag_2O,\;CaWO_4$ and $Gd_2O_2S$:Tb loaded on titanium dioxide photocatalysts (P25, Degussa) were prepared by a calcination. Their composite films containing water-born polyurethane used as a material for immobilization were obtained by spray coating technique. The photocatalytic activity of the titanium dioxide films was characterized by decrease of UV-vis absorption spectra for methylene blue and gas chromatography for photocatalytic decomposition of formaldehyde diluted in water. It was shown that the $Gd_2O_2S$:Tb modified titanium dioxide films had good photocatalytic properties and followed the first-order kinetic model with regard to photocatalytic decoloration of methylene blue. Especially in formaldehyde photodegradation experiment, decrease rate of concentration of the titanium dioxide films with $Gd_2O_2S$:Tb modifying was about 35% larger than that of the unloaded titanium dioxide film.

• Progress in Superconductivity
• /
• 제14권1호
• /
• pp.39-44
• /
• 2012

The fabrications condition and superconducting properties of top-seeded melt growth (TSMG) processed $GdBa_2Cu_3O_{7-y}$ (Gd123) bulk superconductors were studied. Processing parameters (a maximum temperature ($T_{max}$), a temperature for crystal growth ($T_G$) and a cooling rate ($R_G$) through a peritectic temperature ($T_P$) for the fabrication of single grain Gd123 superconductors were optimized. The magnetic levitation forces, trapped magnetic fields, superconducting transition temperature ($T_c$) and critical current density ($J_c$) of the Gd123 bulks superconductors were estimated. Single grain Gd123 bulk superconductors were successfully fabricated at the optimized processing condition. The $T_c$ of a TSMG processed Gd123 sample was 92.5 K and the $J_c$ at 77 K and 0 T was approximately $50kA/cm^2$. The trapped magnetic field contour and magnetic levitation forces were dependent on the top surface morphology of TSMG processed Gd123 samples. The single grain Gd123 samples, field-cooled at 77 K using a Nd-B-Fe permanent magnet with 5.27 kG and 30 mm dia., showed the trapped magnetic field contour of a single grain with a maximum of 4 kG at the sample center. The maximum magnetic levitation forces of the single grain Gd123 sample, field-cooled or zero field-cooled, were 40 N and 107 N, respectively.

• 한국재료학회지
• /
• 제22권11호
• /
• pp.569-574
• /
• 2012

Large single grain $Gd_{1.5}Ba_2Cu_3O_{7-y}$ (Gd1.5) bulk superconductors were fabricated by a top-seeded melt growth (TSMG) process using an $NdBa_2Cu_3O_{7-y}$ seed. The seeded Gd1.5 powder compacts with a diameter of 50 mm were subjected to the heating cycles of a TSMG process. After the TSMG process, the diameter of the single grain Gd1.5 compact was reduced to 43 mm owing to the volume contraction during the heat treatment. The superconducting transition temperature ($T_c$) of the top surface of the single grain Gd1.5 sample was as high as 93.5 K. The critical current densities ($J_cs$) at 77 K and 1T and 1.5 T were in ranges of 25,200-43,900 $A/cm^2$ and 10,000-23,000 $A/cm^2$, respectively. The maximum attractive force at 77 K of the sample field-cooled using an Nd-B-Fe permanent magnet (surface magnetic field of 0. 527 T) was 108.3 N; the maximum repulsive force of the zero field-cooled sample was 262 N. The magnetic flux density of the sample field-cooled at 77 K was 0.311T, which is approximately 85% of the applied magnetic field of 0.375 T. Microstructure investigation showed that many $Gd_2BaCuO_5$ (Gd211) particles of a few ${\mu}m$ in size, which are flux pinning sites of Gd123, were trapped within the $GdBa_2Cu_3O_{7-y}$ (Gd123) grain; unreacted $Ba_3Cu_5O_8$ liquid and Gd211 particles were present near the edge regions of the single grain Gd1.5 bulk compact.

• Advances in nano research
• /
• 제16권1호
• /
• pp.41-52
• /
• 2024

In this study, rare-earth orthoferrites LnFeO₃ were synthesized using a facile hydrothermal reaction and their visible-light-induced photo-Fenton degradation of organics was optimized through Ln variation (Ln = La, Pr, or Gd). The morphological, structural, and chemical characteristics of as-prepared samples were examined in detail by using different methods, including XRD, SEM, TEM, XPS, etc. On the other side, under visible light illumination, the photo-Fenton-like catalytic activities of LnFeO₃ were assessed in terms of the removal of selected organic models, i.e., pharmaceuticals (ketoprofen and tetracycline) and dyes (rhodamine B and methyl orange). As compared with PrFeO₃ or GdFeO₃, the sample of LaFeO₃ displayed more structural distortion, larger specific surface area, and narrower band gap, resulting in its higher photo-Fenton-like catalytic activity toward the degradation of organics. In organic-containing solution, in which the initial solution pH = 5, catalyst dosage = 1 g/L and H₂O₂ concentration = 10 mM, 98.2% of rhodamine B, 31.1% of methyl orange, 67.7% of ketoprofen, or 96.4% of tetracycline was removed after 90-min exposure to simulated visible light. Our findings revealed that variation of Ln site on rare-earth orthoferrites was an effective strategy for optimizing their organic removal via visible-light-induced photo-Fenton reaction.

• Nuclear Engineering and Technology
• /
• 제55권12호
• /
• pp.4642-4646
• /
• 2023

The Tb³⁺ or Eu³⁺-doped Lu₂Gd₁Ga₂Al₃O₁₂ phosphor were fabricated by funace at 1500 ℃ for 12 h using a solid state reaction. The XRD (X-ray diffraction_Panalytical X'Pert Pro) and FE-SEM (field emission scanning electron microscope) are measured to confirm the crystalline structure and surface morphology of the phosphor. The Tb³⁺-doped Lu₂Gd₁Ga₂Al₃O₁₂ phosphor emits the lights in 470~650 nm wavelength range due to transitions from ⁵D₄ to ⁷F_j. Therefore, it shows the green region in the CIE chromaticity diagram under both UV and X-rays excitations. The Eu³⁺-doped Lu₂Gd₁Ga₂Al₃O₁₂ phosphor emits the lights in 550~750 nm wavelength range because of ⁵D_i to ⁷F_j. The emission is confirmed to be in the red region using the CIE chromaticity diagram. The Tb³⁺ or Eu³⁺-doped Lu₂Gd₁Ga₂Al₃O₁₂ phosphor shows the characteristic f-f transition with a long decay time, which is about several milliseconds. They have the high efficiency of light emission for X-ray because of their high effective Z number (Z_eff = 58.5) and density. Therefore, they are very much promising phosphors for X-ray imaging application in medical fields.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.113-113
• /
• 2003

고체전해질체로 사용되는 산소이온전도체로는 $Y_2$O$_3$ 안정화 ZrO$_2$가 널리 연구되어 왔고, 실질적으로 많이 사용되고 있다. 그러나 특히 대전력을 얻고자 하는 고체전해질 연료전지 분야에 있어서는 다른 재료를 찾고자 하는 많은 노력이 이루어지고 있다. 이에 CeO$_2$계 세라믹스는 ZrO$_2$계보다 낮은 온도에서 더 높은 이온전도도를 가지고 있어 많은 주목을 받고 있다. 그러나 이 CeO$_2$계를 소결시키는 데는 1$600^{\circ}C$이상의 고온을 필요로 한다. 이 런 고온의 소결온도를 낮추기 위한 방안으로는 균일하고 미세한 출발원료를 사용하거나 소결조제를 첨가하는 것 등이 있다. 균일하고 미세한 출발원료를 제조하는 연구는 국내외에서 많이 이루어지고 있으나 소결조제 첨가에 대한 연구는 별로 이루어진게 없다. 다만 국외에서 Co$_3$O$_4$, Fe$_2$O$_3$, CoO 첨가에 의한 연구가 최근에 이루어지고 있으며, 본 연구실을 중심으로 Ga$_2$O$_3$, $Al_2$O$_3$ 첨가에 대한 연구가 이루어지고 있다. 본 연구실에서는 그간 공침법으로 제조되는 소결조제 첨가 Gd$_2$O$_3$-doped CeO$_2$ 분말을 사용하여 소결조제 첨가효과를 살펴보았다.

• 한국세라믹학회지
• /
• 제40권7호
• /
• pp.672-676
• /
• 2003

Y$_3$Fe$_{5}$O$_{12}$(YIG), $Y_3$Fe$_{5}$O$_{12}$(Bi:YIG), TbBi:YIG를 (GdCa)$_3$(GaMgZr)$_{5}$O$_{12}$ (SGGG)기판 위에 Liquid Phase Epitaxy (LPE)법으로 단결정 후막을 성장시켰다. 기판회전속도, 과냉도, 성장시간을 고정하여 치환되는 원소의 종류와 양에 따라 가네트 단결정의 격자상수, Bi 치환양, 표면형상, 자기적 특성을 조사하였다. TbBi:YIG 조성의 경우 격자상수는 12.500 $\AA$으로 기판의 격자상수인 12.496 $\AA$에 근접하게 나타났으며, 포화자계는 150 Oe로 향상된 결과가 나타났다.

• 한국세라믹학회지
• /
• 제48권1호
• /
• pp.110-115
• /
• 2011

$Gd_2O_3$-doped $CeO_2$ (GDC) and $La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.8}O_3$ (LSCF) composite cathode materials were prepared in order to be applied to intermediate-temperature solid oxide fuel cells. The electrochemical polarization was evaluated using ac impedance spectroscopy involving geometric restriction at the interface between an ionic electrolyte and a mixed-conducting cathode. In order to optimize the cathode composites applicable to a GDC electrolyte, the cathode composites were evaluated in terms of polarization losses with regard to a given electrolyte, i.e., GDC electrolyte. The polarization increased significantly with decreasing temperature and was critically dependent on the compositions of the composite cathodes. The optimized cathode composite was found to consist of GDC 50 wt% and LSCF 50 wt%; the corresponding normalized polarization loss was calculated to be 0.64 at $650^{\circ}C$.

• 한국결정성장학회지
• /
• 제8권4호
• /
• pp.567-572
• /
• 1998

아크 용융을 사용하여 예비 건조된$La_2O_3,\;V_2O_3,\;TiO_2$,Ti의 혼합물로부터 제조된$LaTi_{0.8}V_{0.2}O_3$ 고용체의 결정구조를 투과전자현미경과 컴퓨터 이미지 시뮬레이션을 이용하여 연구하였다. 컴퓨터 이미지 시뮬레이션은 multislice 방법으로 여러 시편 두께와 초점 거리에서 실시하였다. $LaTi_{0.8}V_{0.2}O_3$ 의 결정구조는 Pnma 공간군을 가진 GdFeO3 형태의 사방정계$(a\approx5.58{\AA},\;b\approx7.89{\AA},\;and\;c\approx5.58{\AA})$로 결정되었다. $LaTi_{0.8}V_{0.2}O_3$에서 Ti와 V 원자의 규칙화에 대한 증거를 찾아 볼 수 없었다.

• 한국세라믹학회지
• /
• 제39권6호
• /
• pp.589-593
• /
• 2002

Bi:Y$_3$Fe$_{5}$ $O_{12}$(Bi:YIG)를 (GdCa)$_3$(GaMgZr)$_{5}$ $O_{12}$(SGGG)기판 위에 Liquid Phase Epitaxy(LPE)법으로 단결정 후막을 성장시켰다 기판회전속도, 과냉도, 성장시간을 고정하여 PO/Bi$_2$ $O_3$ 몰 비 변화에 따른 성장된 가네트 결정의 격자상수 변화와 Bi 농도 분포를 조사하였다. PO/Bi$_2$ $O_3$ 몰 비가 감소함에 따라 성장된 가네트 결정의 격자상수하 Bi 농도는 증가하는 경향이 나타났으나, 가네트 결정의 두께가 증가됨에 따라 Bi 농도는 감소하는 경향이 나타났다.