Browse > Article
http://dx.doi.org/10.4191/KCERS.2011.48.1.110

Electrical Properties in GDC (Gd2O3-Doped CeO2)/LSCF (La0.6Sr0.4Co0.2Fe0.8O3) Cathode Composites for Intermediate Temperature Solid Oxide Fuel Cells  

Lee, Hong-Kyeong (Department of Materials Science and Engineering, Hongik University)
Hwang, Jin-Ha (Department of Materials Science and Engineering, Hongik University)
Publication Information
Abstract
$Gd_2O_3$-doped $CeO_2$ (GDC) and $La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.8}O_3$ (LSCF) composite cathode materials were prepared in order to be applied to intermediate-temperature solid oxide fuel cells. The electrochemical polarization was evaluated using ac impedance spectroscopy involving geometric restriction at the interface between an ionic electrolyte and a mixed-conducting cathode. In order to optimize the cathode composites applicable to a GDC electrolyte, the cathode composites were evaluated in terms of polarization losses with regard to a given electrolyte, i.e., GDC electrolyte. The polarization increased significantly with decreasing temperature and was critically dependent on the compositions of the composite cathodes. The optimized cathode composite was found to consist of GDC 50 wt% and LSCF 50 wt%; the corresponding normalized polarization loss was calculated to be 0.64 at $650^{\circ}C$.
Keywords
Impedance spectroscopy; Solid oxide fuel cells; Electrodes; Polarization; GDC/LSCF cathode composites;
Citations & Related Records

Times Cited By SCOPUS : 0
연도 인용수 순위
  • Reference
1 T. Fukui, S. Ohara, K. Murata, H. Yoshida, K. Miura, and T. Inagaki, "Performance of Intermediate Temperature Solid Oxide Fuel Cells with $La(Sr)Ga(Mg)O_3$ Electrolyte Film," J. Power Sources, 106 [1-2] 142-45 (2002).   DOI
2 G. Hsieh, T. O. Mason, E. J. Garboczi, and L. R. Pederson, "Experimental Limitations in Impedance Spectroscopy: Part III. Effect of Reference Electrode Geometry/Position," Solid State Ionics, 96 [3,4] 153-72 (1997).   DOI
3 G. Hsieh, S.J. Ford, T.O. Mason, and L.R. Pederson, "Experimental Limitations in Impedance Spectroscopy: Part I--Simulation of Reference Electrode Artifacts in Three-Point Measurements," Solid State Ionics, 91 191-201 (1996).   DOI
4 B.C.H. Steele and A. Heinzel, "Materials for Fuel-cell Technologies," Nature, 414 345-52 (2001).   DOI
5 R. Mark Ormerod, "Solid Oxide Fuel Cells," Chem. Soc. Rev., 32 17-28 (2003).   DOI
6 N.Q. Minh, "Solid Oxide Fuel Cell Technology-Features and Applications," J. Am. Ceram. Soc., 76 [3] 563-88 (1993).   DOI
7 O. Yamamoto, "Solid Oxide Fuel Cells: Fundamental Aspects and Prospects," Electrochimica Acta, 45 2423-35 (2000).   DOI
8 S. Zha, A. Moore, H. Abernathy, and M. Liu, "GDC-Based Low-Temperature SOFCs Powered by Hydrocarbon Fuels," J. Electrochem. Soc., 151 [8] A1128-A33 (2004).   DOI
9 E. Siebert, A. Hammouche, and M. Kleitz, "Impedance Spectroscopy Analysis of $La_{1-x}Sr_xMnO_3$-Yttria-Stabilized Zirconia Electrode Kinetics," Elecrtrochmica Acta, 40 [11] 1741-53 (1995).   DOI
10 G. Hsieh, T.O. Mason, and L.R. Pederson, "Experimental Limitations in Impedance Spectroscopy: Part II-Electrode Artifacts in Three-Point Measurements on Pt/YSZ," Solid State Ionics, 91 203-12 (1996).   DOI
11 J. Newman, "Resistance for Flow of Current to a Disk," J. Electrochem. Soc., 113 [5] 501-2 (1966).   DOI
12 S.-H. Park and H.-I. Yoo, "Defect-chemical Role of Mn in Gd-Doped $CeO_2$," Solid State Ionics, 176 1485-90 (2005).   DOI