• 한국도서관정보학회지
• /
• 제41권3호
• /
• pp.391-419
• /
• 2010

이 연구는 이주노동자를 대상으로 정보리터러시(information literacy)의 수준이 높은 집단과 그렇지 않는 집단을 비교분석하여 정보리터러시 격차(information literacy gap)를 야기하는 요인을 규명하는데 목적을 둔다. 이러한 목적을 달성하고자, 이주노동자와 NGO 실무자에 대한 심층인터뷰를 통해 정보리터러시 격차를 야기하는 다양한 요인들의 작용을 발견하였다. 조사 결과, 이주노동자의 정보리터러시 격차는 연령, 결혼여부, 직업에 영향을 받을 뿐 아니라, 한국어교육 및 정보활용교육의 차이, 정보기술에 대한 적응력, 사회활동에 대한 적극성, 사회연결망 등의 개인적 차이와 함께 기술적 경제적 사회적 정책적 요인이 복합적으로 작용해서 발생하는 것으로 나타났다. 이렇게 다차원적이고 복합적인 문제를 해결하기 위해서는 다문화정보서비스를 위한 거버넌스를 구축할 필요가 있다.

• 한국전기전자재료학회논문지
• /
• 제16권10호
• /
• pp.914-922
• /
• 2003

The FFS (fringe-field switching) mode was known to exhibit both a wide viewing angle and high transmittance, especially when using a liquid crystal with negative dielectric anisotropy. We have studied cell gap-dependent electrode-optic characteristics of the FFS mode using the LC with negative dielectric anisotropy. In case of a small cell gap of 2 ${\mu}$m, the transmittance at the center of pixel and common electrodes is relatively low because effect of surface anchoring that holds the LC to the initial state is larger than that in a large cell gap of 4 .urn such that the LCs in those regions cannot rotate enough. However, in case of a large cell gap of 4 .urn, the effect of surface anchoring becomes relatively small so that the LCs at the center of pixel and common electrode can be twisted enough by applied voltage, giving rise to high transmittance. Therefore, we can conclude that the light efficiency is dependent on the cell gap.

• 한국정밀공학회지
• /
• 제23권7호
• /
• pp.59-66
• /
• 2006

In laser welding, automatic seam tracking is important to adjust the laser head position in real time as it moves along the seam. Also if the joint gap is occurred, filling the missing material into the joint gap is necessary to prevent welding defects and bad welding quality. In general, the joint gap width is not constant along the seam due to a variety of reason. So it is essential to control the filler wire speed into the joint gap to acquire good welding quality. This paper describes an intelligent filler wire feeding device which can control 3-dimensional seam tracking and the filler wire speed by measuring the gap position and the joint gap width in laser welding. We call this device as Smart Micro Control system(SMC). To achieve this objective, we assessed weld quality in 2mm sheets of A16061 which had various gap width by using the developed device. From the experimental results, It was found the possibility that the developed device could be used in welding various 3-dimensional structures.

• 정보저장시스템학회논문집
• /
• 제10권1호
• /
• pp.1-6
• /
• 2014

Plasmonic lithography is the latest technique to overcome diffraction limit of previous optical lithography. In the plasmonic lithography, the nano gap between nano metal wave guide and photoresist should be in sub-wavelength region. SIL-based plasmonic lithography is the one of the solutions to maintain small air gap. However, the nano gap control is so sensitive that a little disturbance is able to have a large effect on the nano gap control. So, we analyzed the characteristics of disturbance, and then modified the previous controller to suppress the disturbance. We applied two peak filters which were fixed one and adaptively changeable one. We experimentally confirmed the improvement of the nano gap control, which reduced nano gap error by 30 %. The proposed control will improve the quality of lithography pattern.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제2권2호
• /
• pp.104-111
• /
• 2010

The complete avoidance of cavitation, as a result of gap flow between the fixed and movable portion of a horn type rudder system, is difficult. To reduce gap flow, it is a common practice to attach a half round prismatic bar that protrudes beyond the concave surface of the horn facing the gap and laid along the centerplane of the rudder. However the employment of such a device does not always yield satisfactory results. Previously, the authors have shown that a pair of blocking bars, attached on the convex surface of the movable portion, better enhance the blocking ability of gap flow to that of a single centre bar installed on the concave surface. This also circumvents difficulties that might occur in practical applications. In the present study, a series of numerical computations show that flow injected into the gap of a rudder may also block the flow within, without employment of any physical devices, such as a half circular bar. This study also shows that the combination of flow injection and blocking bars may result in the synergic augmentation of blocking efficiency of gap flow, as demonstrated in computations for a three dimensional rudder system.

• 정보저장시스템학회논문집
• /
• 제3권1호
• /
• pp.1-4
• /
• 2007

A high density optical data storage device has been required for many years. In the field of the optical data storage, a near-field recording (NFR) technology is considered as a next generation one for achieving the high data density. Due to an evanescent wave effect occurred under 100nm distance which is the excessively small distance between the SIL and the disc, the most significant and difficult problem in this technology is to maintain a gap between a solid immersion lens (SIL) and a disc. Also, maintaining the gap under at least 50nm is required in the NFR gap servo system to use the evanescent wave effect efficiently. There are some institutes that have shown the novel gap servo control. In general, they use a mode switching servo method which consists of approach, hand-over and gap control mode. However there is a critical problem such as an overshoot at the tuning point from the approach mode to the hand-over mode, which may cause a collision between the SIL and the disc. In this paper, we show our NFR system and an improved gap servo system using an exponential function as the approach mode which can reduce the overshoot.

• 한국지능시스템학회논문지
• /
• 제12권5호
• /
• pp.462-466
• /
• 2002

GA(Genetic Algorithm)는 자연계 진화를 모방한 계산 알고리즘으로서 단순하고 응용이 쉽기 때문에 여러 분야에 전역적 최적해 탐색에 많이 사용되고 있다. 최근에는 하드웨어를 구성하는 방법의 하나로서 사용되어 진화하드웨어라는 분야를 탄생시켰다. 이와 함께 GA의 연산자체를 하드웨어로 구현하는 GA processor(GAP)의 필요성도 증가하고 있다. 특히 진화하드웨어를 소프트웨어에서 진화시키는 것이 아닌 GAP에 의해 진화시키는 것은 독립된 구조의 진정한 EHW 설계에 필수적이 될 것이다. 본 논문에서는 진화하드웨어의 빠른 재구성을 위한 유전자 알고리즘 프로세서를 설계한다.

• 한국지능시스템학회논문지
• /
• 제19권1호
• /
• pp.62-68
• /
• 2009

수정된 PCX(parent-centric recombination) 연산자와 결합한 두 가지 새로운 세대차 모델이 제안된다. 첫째, 자가적응 세대차 모델(SGG, self-adaptation generation gap)은 자손에 의한 부모의 대치 확률을 일정한 수준으로 유지하는 제어 방식이다. 둘째, 가상 클러스터 세대차(VCGG, virtual cluster generation gap)는 클러스터링을 통해 부모간의 거리를 조정해 주며, 이로 인해 개체들이 다양화 될 수 있다. 이 모델에서 부모간의 거리는 클러스터의 크기로 조절된다. 제안된 두 가지 접근법의 효용성을 입증하기 위해서 3 가지 표준적인 문제에 대한 실험이 수행되었다. 가장 최근의 경쟁력 있는 접근법인 CMA-ES와 G3-PCX와 비교한 결과, 제안된 두 기법 모두 기존의 접근법들 보다 우수함을 보여준다.

• 한국군사과학기술학회지
• /
• 제10권3호
• /
• pp.5-15
• /
• 2007

A welding structures is generally composed of dissimilar steel materials in order to reduce weight cost, and has a gap to fill the welding agent. Also, heat flow analysis should be fulfilled for structure existing of gap to figure out residual stress which is generated after welding. Since mechanical properties of welding structure composed of dissimilar steel is more fragile than mechanical properties of welding structure consisted of same material, heat flow analysis verifying this should be fulfilled as well. Therefore, on this research, heat flow analysis about dissimilar steel weldment consisted of gap existing AISI304 and AISI630 is practiced so that it could be a basic data of research about mechanical properties of gap existing dissimilar steel welding part which is going to be studied later on. During heat flow analysis, heat input model which based on Gaussian profile and using volume heat flux was newly consisted and applied. In addition, for verifying of analysis on this research, gap existing dissimilar steel weldment which had gap of 0.25mm and was welded using Nd-YAG. The welding profile and temperature distribution for weldment during welding was compared to the result which was gotten through heat flow analysis. Both of those results corresponded each other.

• 전력전자학회논문지
• /
• 제22권3호
• /
• pp.249-255
• /
• 2017

This paper presents air-gap control according to Y and Delta connections of a double-sided air-gap permanent magnet synchronous motor (DA-PMSM) with independent three-phase structure. In particular, the DA-PMSM used in this study can be applied to low-speed and high-torque applications, such as wind turbines, tidal power generations, and electric propulsion ships, because of its modular stators and a rotor with numerous permanent magnets. Unlike conventional three-phase machines, the DA-PMSM has a symmetrical configuration with double-sided air-gap. Therefore, Y/Delta winding connections and serial/parallel configurations between stator modules are possible. To identify the DA-PMSM operating characteristics, mathematical modeling is analyzed according to the Y/Delta connections. Moreover, air-gap control performances by applying the winding connection methods are verified through experimental results.