DOI QR코드

DOI QR Code

Air-gap Control According to Y and Delta Connections of Double-sided Air-gap Permanent Magnet Synchronous Motor with Independent Three-phase Structure

독립 3상 구조를 갖는 이중공극형 영구자석 동기전동기의 Y 및 Delta 결선에 따른 공극제어

  • Received : 2016.11.22
  • Accepted : 2017.02.13
  • Published : 2017.06.20

Abstract

This paper presents air-gap control according to Y and Delta connections of a double-sided air-gap permanent magnet synchronous motor (DA-PMSM) with independent three-phase structure. In particular, the DA-PMSM used in this study can be applied to low-speed and high-torque applications, such as wind turbines, tidal power generations, and electric propulsion ships, because of its modular stators and a rotor with numerous permanent magnets. Unlike conventional three-phase machines, the DA-PMSM has a symmetrical configuration with double-sided air-gap. Therefore, Y/Delta winding connections and serial/parallel configurations between stator modules are possible. To identify the DA-PMSM operating characteristics, mathematical modeling is analyzed according to the Y/Delta connections. Moreover, air-gap control performances by applying the winding connection methods are verified through experimental results.

Keywords

References

  1. P. Pillay and R. Krishnan, "Application characteristics of permanent magnet synchronous and brushless dc motor for servo drive," IEEE Trans. Ind. Appl., Vol. 27, No. 5, pp. 986-996, Sep./Oct. 1991. https://doi.org/10.1109/28.90357
  2. S. Morimoto, Y. Asano, and T. Kosaka, "Recent technical trends in PMSM," Power Electronics Conference (IPEC-Hiroshima 2014-ECCE-ASIA), 2014 International, pp. 1997-2003, May 2014.
  3. K. J. Jo. "Design and characteristic analysis of multi-phase motor," Master's Thesis, Korea Maritime University, Busan, Republic of Korea, 2007.
  4. D. J. Bang, H. Polinder, G. Shrestha, and J. A. Ferreira, "Ring-shaped transverse flux PM generator for large direct-drive wind turbine," Power Electronics and Drive Systems, 2009. PEDS 2009. International Conference on, pp. 61-66, Nov. 2009.
  5. S. H. Hwang, D. J. Bang, J. M. Kim, and J. W. Park, "Vector control of multiple-module transverse flux PM generator for large-scale direct-drive wind turbines," Energy Conversion Congress and Exposition (ECCE), 2011 IEEE, pp. 2365-2372, Sep. 2011.
  6. C. N. Heo, B. G. Jeong, S. H. Hwang, and D. J. Bang, "Double-sided air gap control of module-based permanent magnet synchronous machine for low-speed and high-torque application," Power Electronics and ECCE Asia (ICPE-ECCE Asia), 2015 9th International Conference on, pp. 1603-1608, June 1-5, 2015.
  7. C. N. Heo, S. H. Hwang, and D. J. Bang, "Current ripple reduction due to current measurement errors of independent three-phase permanent magnet synchronous machine with dual air-gap," Future Energy Electronics Conference(IFEEC), 2015 IEEE 2nd International, pp. 1-6, Nov. 2015.
  8. C. N. Heo and S. H. Hwang, "Speed ripple reduction of independent three-phase permanent magnet synchronous motor considering unbalanced back-EMFs," Journal of the Korean Institute of Illuminating and Electrical Installation Engineers., Vol. 30, No. 11, pp. 42-49, Nov. 2016. https://doi.org/10.5207/JIEIE.2016.30.11.042
  9. S. H. Hwang, J. M. Kim, D. J. Bang, and J. W. Kim, "Control of independent multi-phase transverse flux linear synchronous motor based on magnetic levitation," Applied Power Electronics Conference and Exposition (APEC), 2014 Twenty-Ninth Annual IEEE, pp. 2488-2491, Mar. 2014.
  10. S. H. Hwang, D. J. Bang, and J. W. Kim, "Air gap control of multi-phase transverse flux permanent magnet linear synchronous motor by using independent vector control," Power Electronics Conference (IPEC-Hiroshima 2014-ECCE-ASIA), 2014 International, pp. 2427-2432, May. 2014.
  11. D. J. Bang and S. H. Hwang, "Wide air-gap control of multi-module permanent magnet linear synchronous motor without magnetic levitation windings," Journal of Power Electronics., Vol. 16, No. 5, pp. 1773-1780, Sep. 2016. https://doi.org/10.6113/JPE.2016.16.5.1773