DOI QR코드

DOI QR Code

A Numerical study for the efficacy of flow injection on the diminution of rudder cavitation

  • Seo, Dae-Won (Department of Naval Architecture and Ocean Engineering, Inha University) ;
  • Lee, Seung-Hee (Department of Naval Architecture and Ocean Engineering, Inha University) ;
  • Kim, Hyo-Chul (Jungseok Research Institute of International Logistics and Trade, Inha University) ;
  • Oh, Jung-Keun (Jungseok Research Institute of International Logistics and Trade, Inha University)
  • Published : 2010.06.30

Abstract

The complete avoidance of cavitation, as a result of gap flow between the fixed and movable portion of a horn type rudder system, is difficult. To reduce gap flow, it is a common practice to attach a half round prismatic bar that protrudes beyond the concave surface of the horn facing the gap and laid along the centerplane of the rudder. However the employment of such a device does not always yield satisfactory results. Previously, the authors have shown that a pair of blocking bars, attached on the convex surface of the movable portion, better enhance the blocking ability of gap flow to that of a single centre bar installed on the concave surface. This also circumvents difficulties that might occur in practical applications. In the present study, a series of numerical computations show that flow injected into the gap of a rudder may also block the flow within, without employment of any physical devices, such as a half circular bar. This study also shows that the combination of flow injection and blocking bars may result in the synergic augmentation of blocking efficiency of gap flow, as demonstrated in computations for a three dimensional rudder system.

Keywords

References

  1. Boo, K.T. Song, I.H. and Sin, S.C., 2004. Numerical Simulation for the Rudder in order to Control the Cavitation Phenomena. Journal of Ship and Ocean Technology, 8(1), pp. 42-50.
  2. Jung, H.J. Lee, J.H. Rhee, S.H. Song, M. and Hyun, B.S., 2009. Unsteady Flow Around a Two-Dimensional Section of a Vertical Axis Turbine for Tidal Stream Energy Conversion. International Journal of Naval Architecture and Ocean Engineering, 1(2), pp.64-69. https://doi.org/10.3744/JNAOE.2009.1.2.064
  3. Kim, S.P. Park, J.J. Kim, Y.S. Jang, Y.H. Choi, Y.B. and Paik, B.G., 2006. An Experimental Research on Gap Cavitation Erosion of Semi-spade Rudder. Journal of the Society of Naval Architects of Korea, 43(5), pp. 578-585. https://doi.org/10.3744/SNAK.2006.43.5.578
  4. Kim, M.C. Lee, U.S. and Byun, T.Y., 2008. Study on Optimization of Anti-erosion Rudder Section of Large Container Ship by Genetic Algorithm. Journal of the Society of Naval Architects of Korea, 45(3), pp. 403-410. https://doi.org/10.3744/SNAK.2008.45.4.403
  5. Oh, J.K. Seo, D.W. and Kim, H., 2009. Numerical Study on the Gap Flow of a Rudder System with Bisymmetric Blocking Bar. Journal of the Society of Naval Architects of Korea, 45(5), pp. 460-470. https://doi.org/10.3744/SNAK.2009.46.5.460
  6. Paik, B.G. Kim, K.Y. Ahn, J.W. Park, S.H. Heo, J.K., and Yu, B.S., 2008. Cavitation Observation and Visualization of the Gap Flows on a Rudder Influenced by Propeller Slipstream and Hull Wakes. Journal of the Society of Naval Architects of Korea, 45(3), pp. 238-246. https://doi.org/10.3744/SNAK.2008.45.3.238
  7. Rhee, S.H. and Kim, H., 2008. A Suggestion of Gap Flow Control Devices for the Suppression of Rudder Cavitation. Journal of Marine Science and Technology, 13(4), pp.356-370. https://doi.org/10.1007/s00773-008-0013-6
  8. Rhee, S.H. Lee, C.M. Lee, H.B. and Oh, J., 2010. Rudder Gap Cavitation: Fundamental Understanding and Its Suppression Devices. International Journal of Heat and Fluid Flow, available online, 2010.
  9. Seo, D.W. Kim, J.H. Kim, H. and Lee, S.H., 2008. Influence of Jet Nozzle Arrangement on the Performance of a Coanda Foil. Journal of the Society of Naval Architects of Korea, 45(6), pp. 569-578. https://doi.org/10.3744/SNAK.2008.45.6.569
  10. Seo, D.W. Oh, J.K. and Lee, S.H., 2009. A Numerical Study on the Gap Flow Using a Fluid Supply Device. Journal of the Society of Naval Architects of Korea, 46(6), pp. 579-587. https://doi.org/10.3744/SNAK.2009.46.6.578
  11. Shen, Y.T. Jiang, C.W. and Remmers, K.D., 1997. A Twisted Rudder for Reduced Cavitation. Journal of Ship Research, 41(4), pp.260-272.

Cited by

  1. Practically applicable devices for blocking the gap flow of a horn rudder to reduce rudder cavitation and their verification through numerical simulations vol.17, pp.1, 2012, https://doi.org/10.1007/s00773-011-0149-7