• Microbiology and Biotechnology Letters
• /
• v.49 no.2
• /
• pp.174-180
• /
• 2021

Chalcones exhibit multiple biological activities. Various studies have attempted to modify the structure of chalcones with a special focus on the addition of substituents to the benzene rings. However, these chemical modifications did not improve the water solubility and bioavailability of chalcones. Glycosylation can markedly affect the physical and chemical properties of hydrophobic compounds. Here, we evaluated the ability of a highly promiscuous glycosyltransferase (GT) BsGT1 from Bacillus subtilis ATCC 6633 to biosynthesize chalcone glucosides. Purified BsGT1 catalyzed the conversion of 4'-hydroxychalcone (compound 1), 4'-hydroxy-4-methylchalcone (compound 2), and 4-hydroxy-4'-methoxychalcone (compound 3), into chalcone 4'-O-β-D-glucoside (compound 1a), 4-methylchalcone 4'-O-β-D-glucoside (compound 2a), and 4'-methoxychalcone 4-O-β-D-glucoside (compound 3a), respectively. To avoid the addition of expensive uridine diphosphate glucose (UDP-Glc), a whole-cell biotransformation system was employed to provide a natural intracellular environment for in situ co-factor regeneration. The yields of compounds 1a, 2a, and 3a were as high as 90.38%, 100% and 74.79%, respectively. The successful co-expression of BsGT1 with phosphoglucomutase (PGM) and UDP-Glc pyrophosphorylase (GalU), which are involved in the biosynthetic pathway of UDP-Glc, further improved the conversion rates of chalcones (the yields of compounds 1a and 3a increased by approximately 10%). In conclusion, we demonstrated an effective whole-cell biocatalytic system for the enzymatic biosynthesis of chalcone β-D-glucoside derivatives.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1057-1060
• /
• 2004

In this study, the wear characteristics of five different dental composite resins cured by conventional halogen light and LED light sources were investigated. Five different dental composite resins of Surefil, Z100, Dyract AP, Fuji II LC and Compoglass were worn against a zirconia ceramic ball using a pin-on-disk type wear tester with 15 N contact force in a reciprocal sliding motion with sliding distance of 10 mm/cycle at 1Hz under the room temperature dry condition. The wear variations of dental composite resins were linearly increased as the number of cycles increased. It was observed that the wear resistances of these specimens were in the order of Dyract AP ＆gt; Surefil ＆gt; Compoglass ＆gt; Z100 ＆gt; Fuji II LC. On the morphological observations by SEM, the large crack formation on the sliding track of Fuji II LC specimen was the greatest among all resin composites. Dyract AP showed the least wear with few surface damage. There is no significant difference in wear performance between conventional halogen light curing and light emitting diodes curing sources. It indicates that a light emitting diodes (LED) source can replace a halogen light source as a curing unit for composite resin restorations.

• Journal of Plant Biotechnology
• /
• v.42 no.3
• /
• pp.154-160
• /
• 2015

The plant breeding technology was developed with genetic engineering. Many researchers and breeders have turned from traditional breeding to molecular breeding. Genetically modified organisms (GMO) were developed via molecular breeding technology. Currently, molecular breeding technologies facilitate efficient plant breeding without introducing foreign genes, in virtue by of gene editing technology. Gene targeting (GT) via homologous recombination (HR) is one of the best gene editing methods available to modify specific DNA sequences in genomes. GT utilizes DNA repair pathways. Thus, DNA repair systems are controlled to enhance HR processing. Engineered sequence specific endonucleases were applied to improve GT efficiency. Engineered sequence specific endonucleases like the zinc finger nuclease (ZFN), TAL effector nuclease (TALEN), and CRISPR-Cas9 create DNA double-strand breaks (DSB) that can stimulate HR at a target site. RecQl4, Exo1 and Rad51 are effectors that enhance DSB repair via the HR pathway. This review focuses on recent developments in engineered sequence specific endonucleases and ways to improve the efficiency of GT via HR effectors in plants.

• Molecular & Cellular Toxicology
• /
• v.4 no.1
• /
• pp.11-15
• /
• 2008

The expression of neuronal nitric oxide synthase (nNOS) is regulated by various spliced first exons (exon 1a-1i), sharing differentially common exon 2 in diverse human tissues. The highly complex structure and regulation of human nNOS gene gave limitations of information for the precise mechanism of nNOS regulation. In the present study, we report that the repeats of polymorphic dinucleotides $(GT)^nA(TG)^n$ repeats located in just upstream to the exon 1f in human nNOS gene play suppressive role in transcription, as shown in the characteristics of Z-DNA motif in other genes. In neuronal and trophoblast cells transfected transiently with luciferase construct without dinucleotide repeats at the 5'-flanking region of exon 1f in nNOS gene, the luciferase activity was increased markedly. However, the presence of the dinucleotide repeats dramatically suppressed the luciferase activity to the basal level, and which was dependent on the length of $(GT)^n$ and $(TG)^n$ repeats. More importantly, we found the polymorphisms in the length of dinucleotide repeats in human. Furthermore, we show for the first time here that there is a significant association of the lengths of polymorphic dinucleotide $(GT)^n$ and $(TG)^n$ repeats with the risk of schizophrenia.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.47 no.3
• /
• pp.352-358
• /
• 2020

Glanzmann's thrombasthenia (GT) is a rare, autosomal recessive inherited congenital disorder, characterized by impaired blood coagulation due to platelet dysfunction. It was first reported by the pediatrician Glanzmann in 1918. GT affects both males and females, and it is more common in regions of the Middle East, India, and France, where intermarriage is common. It has an incidence of about 1 in 1,000,000 people. In South Korea, according to the Division of Rare Diseases, Korea Centers for Disease Control and Prevention, around 200 cases have been reported in 2018. Clinical symptoms include petechia, ecchymosis, epistaxis, and gingival bleeding. The spontaneous loss of deciduous teeth can result in excessive bleeding with that blood transfusion should be considered. Preventing hemorrhages and hemostasis are most important factors in dental treatment. Local bleeding can be controlled by compression, but platelet transfusion can be required by prolonged bleeding. Pediatric dentists can minimize the gingival bleeding by control of the oral hygiene to prevent gingivitis and dental caries. The importance of oral hygiene and periodic recall check-up should be emphasized. During dental treatment, the examination and the treatment plan of patient should be modified to prevention of hemorrhages carefully. A 6-year-old girl with GT was referred for the treatment of dental caries, and resin restoration was performed under nitrous oxide inhalation sedation. After treatment, compression was required for the bleeding control.

• Restorative Dentistry and Endodontics
• /
• v.36 no.4
• /
• pp.300-305
• /
• 2011

Objectives: The aim of this study was to evaluate the various NiTi rotary instruments regarding their ability to provide a circular apical preparation. Materials and Methods: 50 single canal roots were selected, cut at the cementodentinal junction and the coronal 1/3 of the canals was flared using Gates Glidden burs. Samples were randomly divided into 5 experimental groups of 10 each. In group I, GT files, Profile 04 and Quantec #9 and #10 files were used. In Group II Lightspeed was used instead of Quantec. In Group III, Orifice shaper, Profile .06 series and Lightspeed were used. In Group IV, Quantec #9 and #10 files were used instead of Lightspeed. In Group V, the GT file and the Profile .04 series were used to prepare the entire canal length. All tooth samples were cut at 1 mm, 3 mm and 5 mm from the apex and were examined under the microscope. Results: Groups II and III (Lightspeed) showed a more circular preparation in the apical 1mm samples than the groups that used Quantec (Group I & IV) or GT files and Profile .04 series.(Group V)(p < 0.05) There was no significant difference statistically among the apical 3, 5 mm samples. In 5 mm samples, most of the samples showed complete circularity and none of them showed irregular shape. Conclusions: Lightspeed showed circular preparation at apical 1 mm more frequently than other instruments used in this study. However only 35% of samples showed circularity even in the Lightspeed Group which were enlarged 3 ISO size from the initial apical binding file (IAF) size. So it must be considered that enlarging 3 ISO size isn't enough to make round preparation.

• Food Science and Preservation
• /
• v.14 no.5
• /
• pp.516-525
• /
• 2007

The effect on quality improvement of Chokochujang by the addition of green tea extract (GT) was evaluated on the basis of total cell numbers, pH, acidity, sugar content and sensory evaluation during its storage at $25^{\circ}C$ and $37^{\circ}C$ for 3 weeks. A dorminant strain was isolated from the Chokochujang and identified as Bacillus amyloliquefaciens ER282 based on the 16S rDNA sequence. The ethanol extract from GT was investigated for its antibacterial activity aid showed good activities enough to use for Chokochujang as a natural preservative. Growth of microorganisms was significantly inhibited by adding GT extract to Chokochujang but pH, acidity, sugar content and color was not much changed. Sensory evaluation and overall preference, however, was continuously declined as storage period increased, whereas the addtion of 3% GT extract could delay the quality loss of Chokochujang during storage at $25^{\circ}C$ and $37^{\circ}C$ for 3 weeks.

• 한국연소학회:학술대회논문집
• /
• 2014.11a
• /
• pp.115-118
• /
• 2014

Since 1st July 2012, the our Goverment and KOGAS have been adopting a calorific value range system from the standard calorific value system. Domestic power plant companies and KOGAS have asked GT manufacture about the effects of the reduction of the calorific value. We received GT manufacture's answer to the question on April 12.2011. Gas components of some GT models were limited to no more than 9% of the C2+ content. Now some of GTs remain under debating whether effects on variation of gas heating or not.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.04a
• /
• pp.1-3
• /
• 2004

현재 지역적으로 분산되어 있는 대규모 데이터와 고성능 컴퓨터 자원들을 효과적으로 활용하는 그리드 컴퓨팅 연구가 활성화되었다. 사용자는 다양한 종류의 수많은 그리드 자원을 그리드 미들웨어인 GT3를 이용하여 일관된 방법으로 이용할 수 있으며 사용자의 작업을 원격지에서 실행 및 제어할 수 있다. 본 논문에서는 필요성 및 실현 가능한 그리드 컴퓨팅에 대한 관련연구와 GT3를 실행 및 제어하는 관련된 작업을 RSL-Maker를 사용하여 그리드를 이용하는 여러 응용분야의 사용자 누구나 그리드 컴퓨팅을 사용하게 한다. 현재 그리드는 웹의 기술과 접목한 OGSA가 발표되어 많은 연구가 진행되고 있다. 본 연구는 RSL-Maker를 이용하여 GT3와 호환성 및 융통성을 통해서 보다 향상된 그리드 웹 서버 서비스를 구현했다.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2001.10a
• /
• pp.21-24
• /
• 2001

This study is concerned with the development of efficient p-median approach to nondegenerate cell formation(CF) in group technology(GT) manufacturing. Unlike most of existing CF methodologies allowing degenerate cells or families that contains no parts or machines, this study attempts to find cell configuration where each machine cell contains at least two or more machines processing at least two or more parts so as to fully utilize the similarity in designing and processing parts. Nondegenerate CF seeks to minimize both the exceptional elements outside the diagonal block and the voids within the diagonal block. To find nondegenerate cells, a two-phase p-median methodology is proposed. In phase 1, the classical p-median model is implemented to find initial cells. In phase 2, bottleneck machines and parts are reassigned until no further degenerate cells and families are found. Test results on moderately medium-sized CF problems show the substantial efficiency of the proposed approach.