• Interaction and multiscale mechanics
• /
• v.1 no.3
• /
• pp.369-379
• /
• 2008

A combined stochastic diffusion and mean-field model is developed for a systematic study of the grain growth in a pure single-phase polycrystalline material. A corresponding Fokker-Planck continuity equation is formulated, and the interplay/competition of stochastic and curvature-driven mechanisms is investigated. Finite difference results show that the stochastic diffusion coefficient has a strong effect on the growth of small grains in the early stage in both two-dimensional columnar and three-dimensional grain systems, and the corresponding growth exponents are ~0.33 and ~0.25, respectively. With the increase in grain size, the deterministic curvature-driven mechanism becomes dominant and the growth exponent is close to 0.5. The transition ranges between these two mechanisms are about 2-26 and 2-15 nm with boundary energy of 0.01-1 J $m^{-2}$ in two- and three-dimensional systems, respectively. The grain size distribution of a three-dimensional system changes dramatically with increasing time, while it changes a little in a two-dimensional system. The grain size distribution from the combined model is consistent with experimental data available.

• Advances in Traditional Medicine
• /
• v.6 no.2
• /
• pp.79-85
• /
• 2006

In order to study the effect of acupuncture stimulation on bone mineral density (BMD), using the ovariectomized (OVX) rat model, we assessed the degree of osteopenia by dual-energy X-ray absorptiometry, measured the level of locomotor activity using a metabolism measuring system, and performed histological studies of bone tissue. Twenty-four female Wistar rats (8 weeks old, 160 - 180 g)were divided into three groups. Rats in the OVX-A group underwent ovariectomy followed by acupuncture stimulation. The OVX rats in the Vehicle control group were not treated with acupuncture as a control. The rats in the control group received neither ovariectomy nor acupuncture. Acupuncture stimulation for 12 weeks in the OVX-A group inhibited the reduction in BMD of the femoral bones caused by ovariectomy. Moreover, in the two OVX groups, there was no clear difference in the level of locomotor activity between the active and resting phases prior to acupuncture stimulation in each rat, and the pattern of locomotor activity was irregular. After acupuncture stimulation of the OVX-A rats, the pattern of locomotor activity became diphasic with clear active and resting phases, as was observed in the Control group. On histological studies, the continuity of trabecular bone was maintained more favorably and bone mass was higher in the OVX-A group than in the vehicle control group. These results suggest that the increased locomotor activity that had been induced by acupuncture stimulation increased the BMD.

• Journal of Internet Computing and Services
• /
• v.24 no.2
• /
• pp.1-10
• /
• 2023

The Multi-access Edge Computing (MEC) paradigm equips network edge telecommunication infrastructure with cloud computing resources. It seeks to transform the edge into an IT services platform for hosting resource-intensive and delay-stringent services for mobile users, thereby significantly enhancing perceived service quality of experience. However, erratic user mobility impedes seamless service continuity as well as satisfying delay-stringent service requirements, especially as users roam farther away from the serving MEC resource, which deteriorates quality of experience. This work proposes a deep reinforcement learning based service mobility management approach for ensuring seamless migration of service instances along user mobility. The proposed approach focuses on the problem of selecting the optimal MEC resource to host services for high mobility users, thereby reducing service migration rejection rate and enhancing service availability. Efficacy of the proposed approach is confirmed through simulation experiments, where results show that on average, the proposed scheme reduces service delay by 8%, task computing time by 36%, and migration rejection rate by more than 90%, when comparing to a baseline scheme.

• Journal of Internet of Things and Convergence
• /
• v.6 no.2
• /
• pp.45-50
• /
• 2020

In this paper, we propose a QoS-based handover management scheme in SDN. Even though there have been lots of recent services such as IoT, the conventional networks provide a monolitic handover method without considerations on flow-specific QoS features. For example, the conventional Internet provides a handover method which only considers IP continuity. On the other hand, 4G and 5G networks use a strict handover method for all kinds of flows with resource reservations. This means that it is difficult to guarantee the QoS requirements for the flow with a strict QoS requirement in Internet and the inefficient resource utilization can occur in the 4G and 5G because of the strict QoS-based handover management. The proposed scheme proposes the flow handover management scheme based on QoS requirements according to the SDN controller's management. From the network operators' perspective, the proposed scheme can provide the efficient resource utilization as well as QoS provisioning.

• Journal of computational fluids engineering
• /
• v.8 no.2
• /
• pp.16-23
• /
• 2003

A numerical study of the mixing of two fluids(pure water and a solution of glycerol in water) in a microchannel was carried out. By varying the glycerol content of the glycerol/water solution, the variation in mixing behavior with changes in the difference of the properties of the two fluids(e.g., viscosity, density, diffusivity) was investigated. The mixing phenomena were tested for three micromixers: a square mixer, a three-dimensional serpentine mixer, and a staggered herringbone mixer. The governing equations of continuity, momentum and solute mass fraction were solved numerically. To evaluate mixing performance, a criterion index of mixing of mixing uniformity was proposed. In the systems considered, the Reynolds numbers based on averaged properties were 1 and 10. For low Reynolds number (Re = 1), the mixing performance varied inversely with mass fraction of glycerol due to the dominance of molecular diffusion. The mixing performance by diffusion deteriorated due to a significant reduction in the residence time of the fluid inside the mixers.

• 한국전산유체공학회:학술대회논문집
• /
• 2004.03a
• /
• pp.119-125
• /
• 2004

Unsteady nonlinear wave motions on the free surface over a plane beach of constant slope are numerically simulated using a finite difference method in rectangular grid system. Two-dimensional Navier-Stokes equations and the continuity equation are used for the computations. Irregular leg lengths and stars are employed near the boundaries of body and free surface to satisfy the boundary conditions. Also, the free surface which consists of markers or segments is determined every time step with the satisfaction of kinematic and dynamic free surface conditions. Moreover, marker-density method is also adopted to allow plunging jets impinging on the free surface. The second-order Stokes wave theory and solitary wave theory are employed for the generation of waves on the inflow boundary. For the simulation of wave breaking phenomena, the computations are carried out with the plane beach of constant slope in surf zone. The results are compared with each other. The marker-density method is better then the hybrid method. Also they are compared with other existing experimental results. The Agreement between the experimental data and the computation results is good.

• Journal of computational fluids engineering
• /
• v.2 no.1
• /
• pp.46-53
• /
• 1997

The flow field around a three dimensional minivan-like body has been simulated. This study solves 3-D unsteady incompressible Navier-Stokes equations on a non-orthogonal curvilinear coordinate system using second-order accurate schemes for the time derivatives, and third/second-order scheme for the spatial derivatives. The Marker-and-Cell concept is applied to efficiently solve continuity equation. A H-H type of multi-block grid system is generated around a three dimensional minivan-like body. Turbulent flows have been modeled by the Baldwin-Lomax turbulent model. To validate present procedure, the flows around the Ahmed body with 12.5° of slant angle are simulated. A good agreement with other numerical results is achived. After code validation, the flows around a mimivan-like body are simulated. The simulation shows three dimensional vortex-pair just behind body. The flow separation is also observed on the rear of the body. It has concluded that the results of present study properly agreed with physical flow phenomena.

• Journal of Preventive Medicine and Public Health
• /
• v.22 no.3 s.27
• /
• pp.328-336
• /
• 1989

27 shipyard welders were diagnosed as pneumoconiosis and suspected pneumoconiosis(1976-1988) by chest radiographs and were observed over three years. 27 welders were divided into three groups by the state of exposure to welding fume i.e. cessation, decresase or continuity of exposure. And we observed the changing pattern of the chest radiographs of 27 welders with the passage of time. The results were as follows; 1. Grour I (ceased exposure to welding fume) were 10 cases(3 cases: suspected pneumoconiosis,7 cases: pneumoconiosis). Chest radiographs of all cases were improved. The shape and size of small opacities was improved in 6 cases(85.7%) and did not changed in 1 case(14.3%) out of 7 pneumoconiosis welders. 2. Group II (decreased exposure to welding fume) were S cases(2 cases: suspected pneumoconiosis, 3 cases: pneumoconiosis). Chest radiographs were progressed in 2 cases(40%), did not changed in 1 case(20%), were improved in 2 cases(40%) out of 5 cases. The shape and size of small opacities was progressed in 1 case(33.3%) and was improved in 2 cases(66.7%) out of 3 pneumoconiosis welders. 3. Group III(continued expoxsure to welding fume) were 12 cases(1 case: suspected pneumoconiosis, 11 cases: pneumoconiosis). Chest radiographs were progressed in 9 cases(75%), did not changed in 3 cases(25%) out of 12 cases. The shape and size of small opacities was progressed in 1 case(9.1%) and did not changed in 10 cases(90.9%) out of 11 pneumoconiosis welders. 4. The average duration for development into suspected pneumoconiosis was 6.6 years and for progression of each one category after that was 2.2 years(p<0.01). The radiological appearance of pneumoconiosis had disappeared or decreased after cessation of exposure to the welding fume. So that, early detection and control e.g., change of department of pneumoconiosis of welders by screening program will be important for medical surveillance of welders.

• Korean journal of applied entomology
• /
• v.59 no.2
• /
• pp.145-152
• /
• 2020

The populations of Polyphagostarsonemus latus (Acari: Tarsonemidae) peaked two times on green perilla grown in greenhouses of Geumsan-Gun, Chungchungnamdo. The first peak of P. latus was in the middle of June, after it was first detected in late May. The population of P. latus peaked for the second time in mid July as its density stared rapidly increasing in early July. The application of chemical pesticides and eco-friendly agricultural materials, the two management methods used to control P. latus on green perilla, did not alter the occurrence patterns of P. latus; population size of the mite was much larger in greenhouses using chemical pesticides than in the ones using eco-friendly agricultural materials. This difference might be cuased by continuity of the management methods. Chemical control of P. latus should be limited owing to pesticide residue. The highest density of P. latus on green perilla plants was observed after 25 days after inoculation. The density was the highest in mid-aged leaves (e.g., the largest leaves) and the lowest in newly developed leaves (e.g., smallest leaves). However, there was no significant (P > 0.05) correlation between leaf size and density of P. latus. These results indicate that leaf size (e.g., leaf age) did not affect the occurrence of P. latus. Thus, any leaf of a green perilla plant is available as a sample unit for P. latus.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.26 no.1
• /
• pp.130-136
• /
• 1997

Total parenteral nutritional effect was induced by surgical creation of Thiry-Vella fistula(TVFs) in rats. Glutamine, glycine or nucleosides/nucleotide mixture in solution was injected into the loops for 2, 4, 6, 8 days. Control animals received a 0.9％ saline solution. Results include weight gain, total protein, DNA, ［$^3$H］ thymidine incorporation into DNA, morphometry of the intestine in both TVFs and intestine in continuity. Perfusion of nucleosides/nucleotide mixture into the bypassed loops caused an increase in total protein, DNA content, villous height, villous surface area in loops. The injection of glycine into loops caused an increase in ［$^3$H］ thymidine incorporation but the mean values of the protein and DNA contents were not significantly different from those in group Cont and group Nuc. Overall values for group Gln were slightly higher than those of the control but the differences were not statistically significant. This study suggests that this animal model may be useful for studying the effect of dietary factors on intestinal growth and maturation, separating the direct effect of diet from systemic effect on the intestine.