• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1564-1569
• /
• 2007

This study concerns an advanced NURBS surface reconstruction method, which is based on the NURBS surface model fitting to the unstructured point cloud measured from an arbitrary complex shape. The concept of generating a simple triangular mesh model was introduced to generate a quadrilateral mesh model well-representing the topological characteristics of point cloud. The NURBS surface reconstruction processes required the use of the various methodologies such as QEM algorithm, merging scheme of pair-wise triangular mesh, creation algorithm of $G^1$ continuous tensor product NURBS surface patch, and so on. The effectiveness and reliability of the proposed NURBS surface reconstruction method were validated through the simulation results for the geometrically and topologically complex shapes.

• 대한전자공학회논문지SP
• /
• 제37권3호
• /
• pp.17-30
• /
• 2000

본 논문에서는 NURBS (Non-Uniform Rational B-Splines) 곡면 근사에 기반하여 거리 데이터로부터 3차원 곡면 모델을 생성하는 기법을 제안한다 입력으로 이용되는 거리 데이터는 연결 정보가 알려지지 않고 정렬되지 않은 일반적인 3차원 점들의 집합으로 가정한다 제안하는 알고리듬은 초기 모델 추정, 계층적 모델 표현, NURBS 곡면 네트워크 생성의 3단계로 나뉘어진다 초기 모델 추정 단계에서는 K-평균 군집화 기법을 이용하여 다각형면과 삼각형으로 표현되는 근사 모델을 생성하고, 계층적 트리 구조를 이용하여 초기 모델을 표현한다. 계층적 트리 구조로 부터 생성된 사각형면 모델에 의하여 $G^1$ 연속인 NURBS 곡면 네트워크를 효율적으로 생성한다. 제안하는 알고리듬은 초기 모델의 계층적 그래프 해석을 통하여 곡면 네트워크 형성에 필요한 계산량을 감소시켰으며, 또한 정확한 NURBS 제어점 추정을 통하여 근사 오차를 감소시킨다. 모의 실험 결과 거리 데이터로 부터 초기 모델과 다양한 해상도의 NURBS 곡면 네트워크가 효과적으로 생성되었으며 생성된 NURBS 곡면 모델의 근사 오치는 무시할 수 있는 수준임이 관찰되었다.

• 대한기계학회논문집
• /
• 제19권4호
• /
• pp.1005-1012
• /
• 1995

This paper proposes a new approach for modeling sweep surfaces. The overall modeling procedure consists of following steps : (1)remeshing the section curves based on the curve lengths ; (2)remeshing the guide curve and the boundary curves based on a given sweeping rule ; (3)obtaining intermediate section curves at the remeshed points of the guide curve by blending the initial section curves ; (4)compensation of the intermediate section curves ; (5)interpolating the initial and intermediate curves using Hermite interpolant. The resulting sweep surface is expressed in a G$^{2}$ bicubic parametric spline surface.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.719-724
• /
• 1994

This paper describes a hybrid surface-based method for smooth 3D surface approximation to a sequence of 2D cross sections. The resulting surface is a hybrid G $^{1}$ surface represented by a mesh of triangular and rectangular Bezier patches defined on skinning, branching, or capping regions. Each skinning region is approximated with a closed B_spline surface, which is transformed into a mesh of Bezier patches. Triangular G $^{1}$ surfaces are constructed over brabching and capping regions such that the transitions between each capping regions such that the transitions between each triangular surface and its neighboring skinning surfaces are G $^{1}$ continuous. Since each skinning region is represented by an approximated rectangular C $^{2}$ suface instead of an interpolated trctangular G $^{[-1000]}$ surface, the proposed method can provide more smooth surfaces and realize more efficient data reduction than triangular surfacebased method.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2004년도 춘계공동학술대회 논문집
• /
• pp.44-47
• /
• 2004

This paper proposes an approach for composite surface reconstruction from 2D serial cross-sections, where the number of contours varies from section to section. In a triangular surface-based approach taken in most reconstruction methods, a triangular $G^{1}$ surface is constructed by stitching triangular patches over a triangular net generated from the compiled contours. In the proposed approach, the resulting surface is a composite $G^{1}$ surface consisting of three kinds of surfaces: skinned, surface is first represented by a B-spline surface approximating the serial contours of the skinned region and then serial contours of the skinned region and then transformed into a mesh of rectangular Bezier patches. On branched and capped regions, triangular $G^{1}$ surfaces are constructed so that the connections between the triangular surfaces and their neighboring surfaces are $G^{1}$ continuous. Since each skinned region is represented by an approximated rectangular $G^{2}$ surface instead of an interpolated triangular $G^{1}$ surface, the proposed approach can provide more visually pleasing surfaces and realize more efficient data reduction than the triangular surface-based approach. Some experimental results demonstrate its usefulness and quality.

• 대한산업공학회지
• /
• 제20권1호
• /
• pp.87-98
• /
• 1994

This paper describes a method of constructing VC2 Chord-length spline surface from semi-evenly spaced 3D point array. The suface uses Hermite interpolant as Ferguson surface, and it is an extention of chord-length spline curve to surface The proposed surface may be widely used in interpolating smoothly 3D point data obtaind by measurement or engineering design.

• 대한산업공학회지
• /
• 제19권2호
• /
• pp.75-82
• /
• 1993

This paper deals with a systematic procedure for constructing a triangular composite surface which is interpolated from given scattered 3-D points. The procedure consists of a triangulation, construction of curve net, and interpolation of triangular patches. An obtained surface is composed of cubic triangular patches, which are $G^1$ continuous to adjacent other patches.

• 대한산업공학회지
• /
• 제20권2호
• /
• pp.77-90
• /
• 1994

Curve-net interpolation surface is one of the most popular method in engineering design. Therefore it is supported with many commercial CAD/CAM system. However, construction algorithm of curve-net interpolation surfaces is rarely opened to the public because of its copy-right. In this paper we establish a construction algorithm of curve-net interpolation surface so called sweeping surface which especially concentrates on trajectory of cross-section curve. We also show the method which can construct sweeping surfaces as NURB or Bezier mathematical models. Surfaces having the form of standard mathematical models are very useful for the application of joining, trimming, blending etc. The proposed surface interpolation scheme consists of four steps; (1) preparation of guide curves and section curves, (2) remeshing guide curves and section curves, (3) blending section curves after deformation, and (4) determination of control points for sweeping surface using gordon method. The proposed method guarantee $G^1$-continuety, and construct the surface salifying given section curves and trajectory of section curves.

• 한국생산제조학회지
• /
• 제22권6호
• /
• pp.1018-1024
• /
• 2013

In the process of draw die design for stamping automotive press panels, the addendum surfaces generated in metal forming simulation software cannot be used in downstream processes such as machining and making draw dies because simulation tools use simple discrete models for the surface geometry. The downstream processes require more precise and continuous geometric models such as NURBS surfaces. Generally, automotive die engineers manually regenerate the addendum surface geometry using the discrete model. This paper presents an automated geometric modeling process for generating addendum surfaces using draft surface models. The design parameters of the section curve for the addendum surfaces are extracted automatically from the draft geometry. Using the extracted design parameters, smooth addendum surfaces are generated automatically as NURBS surfaces. The generated surfaces are $G^1$ continuous with the part surface and the binder surface, and can be used in downstream processes.

• 한국정밀공학회지
• /
• 제12권1호
• /
• pp.5-14
• /
• 1995

An optical measurement method of three dimensional surface profiles which is named the slit beam projection is suggested and practically implemented. This method is intended especially for noncontact and fast digitization of sculptured surfaces for CAD modeling and die manufacturing. Its basic principles are based on geometric optics. Deatiled optical principles and an sub-pixel image processing technique to enhance the measuring resolutions are described in this study. The measuring performances of the slit beam projection are presented and discussed to demonstrate that an actual measuring accuracy of below .+-. 0.2mm can be achived over the whole measuring range(500mm*300mm*200mm)