• 한국전기전자재료학회논문지
• /
• 제22권9호
• /
• pp.756-759
• /
• 2009

We described the growth of undoped ZnO thin films and their optical properties changing with a various growth temperature. The undoped ZnO thin films were grown on $c-Al_2O_3$ substrates using pulsed laser deposition (PLD) at room temperature, 200, 400, and $600^{\circ}C$, respectively. Field emission microscopy (FE-SEM) measurements showed that the grain size of undoped ZnO thin films are increasing as a increase of growth temperature. In addition, we were investigated that the structural and optical properties of undoped ZnO thin films by x-ray diffraction (XRD) and photoluminescence (PL) studied. Also, we could confirmed that the exciton luminescence was strongly related to charge trap by grain boundary of the samples using micro-PL measurement.

• 자원환경지질
• /
• 제30권4호
• /
• pp.279-289
• /
• 1997

Dark to pale green-colored, Cr-bearing sericites from hydrothermal alteration zone of the Narim gold deposit were investigated mineralogically and geochemically. The alteration zone is composed mineralogically of quartz, carbonate minerals and green sericite with minor amounts of chlorite, barite and sulfide minerals (pyrite, sphalerite, galena). The zone is enriched in As (967 to 1520 ppm), Cu (31 to 289 ppm), Ni (1027 to 1205 ppm), Pb (0.20 to 1.24 wt.%) and Zn (1.03 to 1.07 wt. %) compared with fresh rocks such as granitic gneiss, porphyritic biotite granite and basic dyke. The Cr, probably the chromophore element, is highly enriched in the alteration zone (1140 to 1500 ppm), host granitic gneiss (1200 ppm) and porphyritic biotite granite (1200 ppm). Occurrence and grain size of sericite are diverse, but most of the Cr-bearing sericites (150 to $200{\mu}m$ long and 20 to $30{\mu}m$ wide) occur along the boundaries between ore veins and host rocks (especially basic dyke and granitic gneiss). X-ray diffraction data of the sericite show its monoclinic form with unit-cell parameters of $a=5.202{\AA}$, $b=8.994{\AA}$, $c=20.103{\AA}$, ${\beta}=95.746^{\circ}$ and $V=935.83{\AA}^3$, which are similar with the normal 2M1-type muscovite. Representative chemical formula of the sericite is ($K_{1.54}Ca_{0.03}Na_{0.01}$)($Al_{3.42}Mg_{0.38}Cr_{0.14}Fe_{0.06}V_{0.02}$)($Si_{6.69}Al_{1.31}$)$O_{20}(OH)_4$. The Cr content increases with decrease of the octahedral Al content, and ranges from 0.36 to 2.58 wt.%. DTA and TG curves of the sericite show endothermic peaks at $342^{\circ}$ to $510^{\circ}$, $716^{\circ}$ to $853^{\circ}$ and $1021^{\circ}C$, which are due to the expulsion of hydroxyl group. The total weight loss by heating is measured to be about 8.8 wt. %, especially at $730^{\circ}C$. Infrared absorption experiments of the sericite show broad absorption band due to the O-H bond stretching vibration near the $3625cm^{-1}$, coupled with the 825 and $750cm^{-1}$ doublet. The vibration bands related with the H-O-Al and Si-O-Al bonds occur at $1030cm^{-1}$ and 500 to $700cm^{-1}$, respectively. Based on paragonite content of the sericite, the formation temperature of the Narim gold deposit is calculated to be $220{\pm}10^{\circ}C$.

• Molecular & Cellular Toxicology
• /
• 제1권3호
• /
• pp.189-195
• /
• 2005

Industrial development has increase consumption of crude oil and environmental pollution. A large number of microbial lipolytic enzymes have been identified and characterized to date. To development for a new lipase with catalytic activity in degradation of crude oil as a microbial enzyme, Acinetobactor sp. B2 was isolated from soil samples that were contaminated with oil in Daejon area. Acinetobactor sp. B2 showed high resistance up to 10 mg/mL unit to heavy metals such as Ba, Li, Al, Cr, Pb and Mn. Optimal growth condition of Acinetobactor sp. B2 was confirmed $30^{\circ}C$. Lipase was purified from the supernatant by Acinetobactor sp. B2. Its molecular mass was determined to the 60 kDa and the optimal activity was shown at $40^{\circ}C$ and pH 10. The activation energies for the hydrolysis of p-nitrophenyl palmitate were determined to be 2.7 kcal/mol in the temperature range 4 to $37^{\circ}C$. The enzyme was unstable at temperatures higher than $60^{\circ}C$. The Michaelis constant $(K_{m})\;and\;V_{max}$ for p-nitrophenyl palmitate were $21.8{\mu}M\;and\;270.3{\mu}M\;min^{-1}mg\;of\;protein^{-1}$, respectively. The enzyme was strongly inhibited by $Cd{2+},\;Co^{2+},\;Fe^{2+},\;Hg^{2+},\;EDTA$, 2-Mercaptoethalol. From these results, we suggested that lipase purified from Acinetobactor sp. B2 should be able to be used as a new enzyme for degradation of crude oil, one of the environmental contaminants.

• 한국의류산업학회지
• /
• 제19권3호
• /
• pp.337-343
• /
• 2017

The purpose of this study is to investigate the optimal dyeing conditions and human-friendly properties of the extract from the branches of Alnus firma tree which is widely used for forestation and to provide basic information for quantification and commercialization of natural dyeing by discovering such as dye material. The optimal dyeing conditions, as a result, were shown at 100% of dye concentration, $90^{\circ}C$ of dyeing temperature and 40 minutes of dyeing time. In terms of dye uptake depending on the mordanting methods, it showed the best result in order of Fe, Sn, Cu and Al at pre-mordanting while found strong in order of Fe, Cu, Al and Sn at post-mordanting. Color fastness to washing and dry cleaning was found strong at grade 4-5 and fastness to light was rated at 2. The grade of change in color to rubbing and perspiration was good at 4-5. In aspects of functional properties, it showed excellent results of 98% deodorization rate at 120 minutes of dyeing time, 96.1% UV protection rate and 99.9% bacterial reduction against Staphylococcus aureus and Klebsiella pneuminiae. It is considered, therefore, the extract from Alnus firma tree is of great value as an eco-friendly natural dyestuff.

• 한국분말재료학회지
• /
• 제24권4호
• /
• pp.292-297
• /
• 2017

A metallic oxide layer of a heat-resistant element contributes to the high-temperature oxidation resistance by delaying the oxidation and has a positive effect on the increase in electrical resistivity. In this study, green compacts of Fecralloy powder mixed with amorphous and crystalline silica are oxidized at $950^{\circ}C$ for up to 210 h in order to evaluate the effect of metal oxide on the oxidation and electrical resistivity. The weight change ratio increases as per a parabolic law, and the increase is larger than that observed for Fecralloy owing to the formation of Fe-Si, Fe-Cr composite oxide, and $Al_2O_3$ upon the addition of Si oxide. Si oxides promote the formation of $Al_2O_3$ and Cr oxide at the grain boundary, and obstruct neck formation and the growth of Fecralloy particles to ensure stable electrical resistivity.

• 한국재료학회지
• /
• 제14권4호
• /
• pp.293-299
• /
• 2004

Transition metal ions doped $TiO_2$ nanostructured powders were prepared with simply heating aqueous $TiOCl_2$ solutions, contained various metal ions (Ni, Al, Fe, Zr, and Nb) of 1.47 mol% added as metal-chlorides, at $100^{\circ}C$ for 4 hrs by homogeneous precipitation process under suppressing conditions of water vaporization. The characterizations for prepared $TiO_2$ powders were carried out to observe doping of metal ions, their concentrations and microstructures using XRD, UV-VIS (DRS), XPS, SEM, TEM and ICP. Also, photo-oxidative abilities were evaluated by decomposition of 4-chlorophenol (4CP) under ultraviolet light irradiations. No secondary oxide phases were formed in all the $VTiO_2$ powders, showing doping with various transition metal ions. When adding ions ($Ni^{2+}$ or$ Al^{3+ }$ and $Zr^{4+}$ ) having valance states or ionic radii greatly different from those of $Ti^{4+}$ , the $TiO_2$ powders of mixed anatase and rutile phases were formed, whereas in the case of additions of $^Fe{3+ }$ and $Nb^{ 5+}$ as well as no addition of metal ion the powders with pure rutile phase alone were formed. Among the prepared $TiO_2$ powders, Ni$^{2+}$ doped $TiO_2$ powders, containing a small amount of anatase phase, showed excellent photo-oxidative ability in 4CP decomposition because of relative decreases in electron-hole recombination and poisoning of $TiO_2$ surface during the photoreaction.n.

• Korean Chemical Engineering Research
• /
• 제49권2호
• /
• pp.168-174
• /
• 2011

La을 기반으로 하는 다양한 페롭스카이트 촉매를 페치니(Pechini)법에 따라 제조하고, 이 촉매를 음식물 처리 과정에서 발생하는 악취 성분의 저온 산화 반응에 적용하여 효과적인 탈취가 이루어지도록 하였다. 배출 가스의 정량 및 정성 분석을 통하여 음식물 처리 시간에 따른 주요 악취 성분의 양을 조사하였다. 그리고 주요 악취 성분들로 구성된 표준 악취 시료는 산화 반응기의 반응물로 도입하였다. 먼저, 다양한 전이 금속 M이 치환된 La 기반 페롭스카이트 촉매($LaMO_{3}$: M=Cr, Mn, Fe, Co 및 Ni)를 제조하고 전이 금속 M의 영향을 알아보기 위해 악취 성분의 산화 반응에 적용한 결과, 테스트한 촉매 중에서 $LaNiO_3$ 촉매가 가장 우수한 촉매 활성을 보였다. 또한 촉매 활성을 증진시키기 위하여 Pt가 치환된 페롭스카이트 촉매($LaNi_{1-x}Pt_{x}O_{3}$: x=0, 0.03, 0.1 및 0.3)를 제조하였고, 이로부터 $LaNi_{0.9}Pt_{0.1}O_{3}$ 촉매가 가장 효율적인 촉매인 것을 알 수 있었다. 끝으로 저온 산화 반응에서의 페롭스카이트 촉매의 활성을 극대화하기 위하여 담지된 페롭스카이트 촉매($XLaNi_{0.9}Pt_{0.1}O_{3}/Al_{2}O_{3}$: X=페롭스카이트 함량(wt%), 0, 10, 20, 30, 40, 50 및 100)를 적용하였다. $XLaNi_{0.9}Pt_{0.1}O_{3}/Al_{2}O_{3}$ 촉매의 활성은 페롭스카이트 함량에 따라 화산형(Volcano-shaped) 곡선을 나타내었으며, 이 때 $20LaNi_{0.9}Pt_{0.1}O_{3}/Al_{2}O_{3}$ 촉매가 $180^{\circ}C$의 반응 온도에서 88.7%의 가장 높은 전환율을 보였다.

• 생명과학회지
• /
• 제19권8호
• /
• pp.1132-1138
• /
• 2009

해양세균 Pseudoalteromonas psicida TA20의 ethanol 색소 추출물에 대한 안정성과 기능성을 검토한 결과, 본 해양세균 색소는 pH 4.0에서 pH 8.0의 조건과 $40^{\circ}C$ 이하에서 매우 안정하였으며, $25^{\circ}C$ 14일간 90% 이상의 잔존율을 나타내어 빛에 대한 안정성이 매우 우수한 것으로 나타났다. 금속이온의 경우 $Al^{3+}$과 $Cu^{2+}$를 제외한 실험된 모든 금속이온에 대하여 매우 안정하였으며 특히, 다른 색소추출물들에 비해 $Fe^{2+}$에 대한 안정성이 높은 것으로 나타났다. 해양세균 색소추출물에 대한 생리활성 실험 결과, free radical 소거 활성 (3495 ${\mu}g/ml$)이 나타났으며, 색소농도 10 ${\mu}g/ml$일 때 44%의 인체세포 DNA 손상 회복능이 있음을 보여 항산화능이 우수함을 알 수 있었다. 또한 주요 식품유해세균에 대하여 항균활성을 나타내었다. 따라서 본 해양세균 색소는 항산화능과 항균활성을 갖는 식품 색소로의 적용을 검토할 수 있을 것으로 기대된다.

• 공업화학
• /
• 제8권1호
• /
• pp.140-145
• /
• 1997

$Cu/ZnO/ZrO_2$와 MFI계열의 제올라이트(HZSM-5, H-Ga-Sllicate, H-Fe-Silicate)로 이루어진 혼성촉매상에서 이산화탄소 접촉수소화반응을 수행하였다. MFI계열의 제올라이트중 브뢴스테드 산점양이 가장 많은 HZSM-5를 포함한 혼성촉매가 가장 높은 $C_2{^+}$ 탄화수소 수율을 나타내었다. HZSM-5를 포함한 혼성촉매 중에서는 $SiO_2/Al_2O_3$비가 낮을수록, 이온교환 시간이 많을수록 즉 브뢴스테드 산점의 양이 많을수록 $C_2{^+}$ 탄화수소에 대한 수율이 높았다. HZSM-5에 금속이온을 이온 교환 하였을 경우, $HZSM-5{\simeq}Ga/HZSM-5>Zn/HZSN-5$의 순서로 활성이 높았는데 이 또한 브뢴스테드 산점수가 많을수록 활성이 증가하였다.

• 한국표면공학회지
• /
• 제42권6호
• /
• pp.280-286
• /
• 2009

In this study, the corrosion property of copper alloy tubes in seawater has been investigated. Three copper alloys of nominal composition Cu-20Zn-2Al(Al-Brass), Cu-30Ni(CN70/30) and Cu-10Ni(CN90/10) were considered. The samples were immersed in 3%NaCl flowing solution at $90^{\circ}C$ for 30, 50 and 80 days. Corrosion rate of copper alloy tubes in 3%NaCl flowing solution was investigated by weight-loss measurements and electrochemical test. The CN70/30 showed lowest corrosion rate among three copper alloy tubes. Because of passive films formation, corrosion rates of three types of copper tubes were decrease with time. Surface characteristics of copper alloy tubes were analyzed by optical micrograph(OM), scanning electronic microscopy (SEM), energy dispersive X-ray analysis(EDAX) and X-ray diffraction patterns(XRD). CN70/30 showed partly pitting problem on the surface owing to high Fe content, even though having high resistant against corrosion. Cracks appeared on the surface of CN90/10 and CN70/30 after more than 50 days immersion, which could be derived from high nickel contents.