• Journal of Environmental Impact Assessment
• /
• v.30 no.4
• /
• pp.215-224
• /
• 2021

In this study, to investigate the effect of stabilization of Pb-contaminated soil near a smelter site for the reduction of environmental risk of Pb leaching, commercial stabilizers were amended with the Pb-contaminated soil and evaluated leaching characteristics of Pb in soil by TCLP and SPLP leaching test. Also, performing sequential extraction procedure speciation of Pb in the amended soil was investigated. Limestone, AC-2 (Amron), Metafix (Peroxychem) that possess stabilization performance towards heavy metal in soil and mass production is available were selected as candidates. AC-2 contained a CaCO₃ and MgO crystalline phase, while Metafix had a Fe₇S₈ crystalline phase, according to XRD studies. Pb content in SPLP extract was lower than the South Korean drinking water standard for Pb in groundwater at 4% AC-2 and Metafix treatment soil, and TCLP-based stabilization effectiveness was more than 90%. The findings of the sequential extraction method of soil treated with Metafix revealed that fractions 1 and 2 of Pb, which correspond to relatively high mobility and bioavailable fractions, were lowered, while the residual fraction (fraction 5) was raised. As a consequence, the order of performance for Pb stabilization in polluted soil was Metafix>AC-2>limestone.

• Korean Journal of Soil Science and Fertilizer
• /
• v.41 no.3
• /
• pp.206-213
• /
• 2008

We observed the physical and chemical properties of a soil on pine mushroom picking areas where were located in the most upper and lower parts showing a comparative climatic characteristics in Korea. The slope gradients within the investigation areas which were divided into 100 quadrates of $1m^2$ ranged from $5.7{\sim}8.6{\beta}$ to $24{\sim}22.7{\beta}$ (left to right) and $4.5{\sim}6.8{\beta}$ to $13.5{\sim}17.8{\beta}$ (top to bottom) for Ponghwa and Gansung, respectively. The amount of clay and thickness of organic matter were significantly decreased with increasing slope gradient, resulting in decrease of the soil moisture content around a fairly ring-colony of Tricholoma matsutake which was observed under the relatively thicker organic matter layer beyond 3 cm depth. Soil pHswere weak acid and average EC was $0.44dS\;m^{-1}$ in both areas. The cations were in the order of Fe K > Na > Mg > Ca and Fe > K > Na > Ca > Mg for the upper(Gansung) and the lower (Ponghwa) part. And the amount of Fe was approximately $80dS\;m^{-1}$ or greater in the pine mushroom picking soil. From this, we could assume that the growth of the pine mushroom was closely related not only with iron but also soil moisture content.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.23 no.1
• /
• pp.79-84
• /
• 2007

Mineral Trioxide Aggregate(MTA) has been used in Endodontic treatment successfully for more than 10 years. But the high cost of MTA limits its use in endodontics in Korea. Recently many studies have been done to compare MTA and Portland cements. To investigate the chemical constitutions of MTA (Proroot MTA, Tulsa Dental), Gray Portland cement (Lafarge Halla cement), White Portland cement(Union corp), and fast setting cement (SSangyong cement), we performed SEM(scanning electron microscope)(S4700, Hitachi) examination and EDS(Energy dispersive spectrometry)(emax, Horiba) analysis. SEM examination and EDS analysis were committed to and performed in SNU DRI (Seoul National University Dental Research Institute). We found that particles of MTA were relatively round, uniform in size, and compactly packed compared to Portland cements. Chemical constitutions of MTA, GPC, WPC and FSC were similar. It was shown that MTA contains much BiO2 . MTA and WPC showed less heavy metals such as Fe and Mg compared to GPC and FSC. FSC showed remarkably high aluminum content.

• Journal of Animal Science and Technology
• /
• v.46 no.6
• /
• pp.1013-1022
• /
• 2004

This study investigated the effects of silkworm droppings(SWD) added diet feeding on chemical composition of pork loin meat. Pigs were divided into 7 treatment groups(10 pigs/group) and subjected to one of seven treatment diets(O, 1 0/0, 2 0/0, 3% SWD for 4 weeks, 1 0/0, 2 0/0, 3% SWD for 8 weeks, SWD diets; total fed diets) before slaughter. Pork loin were collected from the animals(1l0 kg body weight) slaughtered at a commercial slaughter house. Pork loin meat were aerobic packaged and then stored at$4^{\circ}C$ for 2, 5, 8, or 12 days. Samples were analyzed for TBARS, sensory evaluation, myoglobin content, fatty acid composition, amino acid and mineral content. TBARS value was not significantly different between the control and SWD treatment groups. Myoglobin content of SWD fed group pork was significantly increased than that of control group(P<0.05). Marbling score and acceptability were increased in SWD fed pork compared to those in control pork. Na, Mg, Ca, Mn and Fe content of SWD fed group pork was significantly decreased than those of control group(P<0.05). P content was significantly increased than that of control group(P< 0.05). In the change of amino acid composition, the contents of aspartic acid, serine and tyrosine were decreased by dietary SWD-supplementation, whereas the SWD-supplementation resulted in the higher glutamic acid, alanine and isoleucine. As dietary SWD was increased in feed, the content of oleic acid was significantly increased, but stearic acid was significantly decreased(P<0.05).

• Journal of the Korean Ceramic Society
• /
• v.43 no.10 s.293
• /
• pp.601-606
• /
• 2006

For the purpose of development of red color stain body, bone body which can be fired at 1180$^{\circ}C$ and has a higher degree of whiteness and transmission was developed and a property experiment depending on the content of $Fe_2O_3$ was performed. For manufacturing this body, 9% addition of bone ash to commercialized white body resulted in the best whiteness and proper physical characteristics. In an experiment of oxidized iron addition using this body as a basis, red color stain body fired up to 1150$^{\circ}C$ following the addition of 6% oxidized iron showed physical characteristics such as 5.4R color closer to theory color, 0.08% water absorption rate, 9.1% shrinkage, and 1861 kgf/$cm^2$ bending strength, which implies that this body is suitable for red color stain body.

• Korean Journal of Soil Science and Fertilizer
• /
• v.2 no.1
• /
• pp.53-68
• /
• 1969

The nutriophysiological response of rice plant to root environment was investigated with eye observation of root development and rhizosphere in situation. The results may be summarized as follows: 1) The quick decomposition of organic matter, added in low yield soil, caused that the origainal organic matter content was reached very quickly, in spite of it low value. In high yield soil the reverse was seen. 2) In low yield soil root development, root activity and T/R value were very low, whereas addition of organic matter lowered them still wore. This might be contributed to gas bubbles around the root by the decomposition of organic matter. 3) Varietal difference in the response to root environment was clear. Suwon 82 was more susceptible to growth-inhibitine conditions on low-yield soil than Norin 25. 4) Potassium uptake was mostly hindered by organic matter, while some factors in soil hindered mostly posphorus uptake. When the organic matter was added to such soil, the effect of them resulted in multiple interaction. 5) The root activity showed a correlation coeffieient of 0.839, 0.834 and 0.948 at 1% level with the number of root, yield of aerial part and root yield, respectively. At 5% level the root-activity showed correlation-coefficient of 0.751, 0.670 and 0.769 with the uptake of the aerial part of respectively. N, P and K and a correlation-coefficient of 0.729, 0.742 and 0.815 with the uptake of the root of respectively N.P. and K. So especially for K-uptake a high correlation with the root-activity was found. 6) The nitrogen content of the roots in low-yield soil was higher than in high-yield soil, while the content in the upper part showed the reverse. It may suggest ammonium toxicity in the root. In low-yield soil Potassium and Phosphorus content was low in both the root and aerial part, and in the latter particularly in the culm and leaf sheath. 7) The content of reducing sugar, non-recuding sugar, starh and eugar, total carbohydrates in the aerial part of plants in low yield soil was higher than in high yield soil. The content of them, especially of reducing sugar in the roots was lower. It may be caused by abnormal metabolic consumption of sugar in the root. 8) Sulfur content was very high in the aerial part, especially in leaf blade of plants on low yield soil and $P_2O_5/S$ value of the leaf blade was one fifth of that in high yield soil. It suggests a possible toxic effect of sulfate ion on photophosphorization. 9) The high value of $Fe/P_2O_5$ of the aerial part of plants in low yield soil suggests the possible formation of solid $Fe/PO_4$ as a mechanical hindrance for the translocation of nutrients. 10) Translocation of nutrients in the plant was very poor and most nutrients were accumulated in the root in low yield soil. That might contributed to the lack of energy sources and mechanical hindrance. 11) The amount of roots in high yield soil, was greater than that in low yield soil. The in high-yield soil was deep, distribution of the roots whereas in the low-yield soil the root-distribution was mainly in the top-layer. Without application of Nitrogen fertilizer the roots were mainly distributed in the upper 7cm. of topsoil. With 120 kg N/ha. root were more concentrated in the layer between 7cm. and 14cm. depth. The amount of roots increased with the amount of fertilizer applied.

• Journal of the Korean Applied Science and Technology
• /
• v.23 no.1
• /
• pp.63-69
• /
• 2006

Methanol and formaldehyde were produced directly by the partial oxidation of methane. The catalysts used were mixed oxides of late-transition metals, such as Mn, Fe, Co, Ni and Cu. The reaction was carried out at $450^{\circ}C$, 50 bar in a fixed-bed differential reactor. The prepared catalysts were characterized by XRD, TPD and BET apparatus. Of the catalysts, A-Mn0.2-6, which contains 0.2 mole of Mn and calcined at $600^{\circ}C$, showed the best catalytic activity: 3.7% methane conversion, and 30 and 28% methanol and formaldehyde selectivities, respectively. The catalytic activity was changed with the content of Mn and the calcination temperature. Catalytic activity increased with the specific surface areas of the catalysts. With XRD, it was found that the structure of the catalysts are changed with calcination temperature. Through $O_2-TPD$ experiment, it was found that the catalysts showing good catalytic activity showed $O_2$ desorption peak around $800^{\circ}C$.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.43 no.2
• /
• pp.146-158
• /
• 2010

In order to evaluate the characteristics of sediments and pollution by organic matter and metallic elements in intertidal sediments along the southwestern coast of Korea, we measured various geochemical parameters, including the mean grain size (Mz), water content (WC), ignition loss (IL), chemical oxygen demand (COD), acid volatile sulfide (AVS), and metallic elements (Al, Fe, Cu, Pb, Zn, Cd, Cr, Mn, Hg, As), in intertidal surface sediments. The Mz of the surface sediments ranged from 2.1 to 8.3$\phi$, indicating that the surface sediments consist of various sedimentary facies, such as sand, slightly gravelly mud, sandy mud, and silt. The IL and COD in surface sediment ranged from 0.8 to 5.5% (mean $2.9\pm1.2%$) and from 3.9 to $13.8\;mgO_2/g{\cdot}dry$ (mean $8.5\pm2.6\;mgO_2/g{\cdot}dry$), respectively, which were lower than the values for surface sediment in areas near fish and shellfish farms or industrial complexes. No AVS was detected at any sampling station, despite various sedimentary facies. Most of metallic elements in surface sediments showed relatively good positive correlations with Mz and IL, which imply that the concentrations of metallic elements are mainly controlled by grain size and the organic matter content. The concentrations of metallic elements, except As, at some stations were considerably lower than those in the Sediment Quality Guideline (Effect Range Low, ERL) proposed by the National Oceanic and Atmospheric Administration (NOAA) in the United States. Similarly, the geoaccumulation index (Igeo) class indicated that pollution by metallic elements in intertidal surface sediment, except As, was moderate or non-existent. Our results imply that the intertidal surface sediments along the southwestern coast of Korea are not polluted by organic matter and metallic elements and are healthy for benthic organisms.

• Journal of Conservation Science
• /
• v.27 no.1
• /
• pp.61-74
• /
• 2011

The material characteristics of Chos$\breve{o}$n whiteware were investigated by analyzing and comparing the body and glaze compositions of whiteware shards excavated at the Kwangju royal kilns, Ch'unghyodong, and four other local-level kilns. In Korea, the rise of whiteware technology began in the early years of the Chos$\breve{o}$n dynasty, when the indigenous tradition of Kory$\breve{o}$ celadon was strongly influenced by the whiteware aesthetics of the Chinese Ming dynasty. The Kwangju royal kilns eventually made hard-textured whiteware of a quality equivalent to that of the Chinese by using type of porcelain stone that contained slightly less $Fe_2O_3$ and $TiO_2$ and slightly more $K_2O$ than that used for celadon. In contrast, the potters of Ch'unghyodong achieved the same level of quality by finding and using a totally different material: kaolinitic clay. The porcelain stone used at the Kwangju kiln was commonly found in Korea and south China, whereas kaolinitic clay (which has a high aluminum content) was typically found in north China, and was only rarely used in Korea. The flux component of the glaze compositions was mostly limestone, first in burnt form and later in crushed form, and the clay component was often glaze stone, which was a finer-grained porcelain stone with a higher proportion of feldspar. In the future, this comparative analytical study of Korean whiteware components should be extended to the $18^{th}$- and $19^{th}$-century kilns that are currently being excavated at a rapid pace.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.39 no.3
• /
• pp.96-107
• /
• 1997

This study was carried out to examine the physicochemical characteristics of dredged soils in reservoirs. Surveys and analyses of basic materials were made on 241 of 2,328 reservoirs in Chonbuk province through 2 years from December 1994 to November 1996. The results of this study are summarized as follows : 1. Soils were classified as 15 types according to physical properties, and some soils contain comparatively high percentage of sand and gravel. Considering only soil textures, useful and economical soils as aggregate are approximately 25% in all, and the other soils are arable for farm planting. 2. The results of chemical analyses of soils showed on the average 5.9 in pH, 1.lmmhos/cm in ECe, 14.6me/l00g in CEC, 460.0ppm in T-N, 119.0ppm in T-P, 264.9ppm in K, 134.2ppm in Na, l,335.0ppm in Ca, 575.9ppm in Mg, 486.Sppm in Fe, 57.7ppm in Mn, 3.3ppm in Cu, 21.9ppm in Zn, 0.49ppm in As, 0.34ppm in Cd, 0.O3ppm in Hg, 1.7% in OM, respectively. 3. General chemical components, heavy metals, organic matter contents were analyzed as similar to tlie mean values of common soils, therefore it was considered to be no significant effects on crop growth in the chemical properties. 4. Accodingly, the physicochemical characteristics of soils ought to be analyzed accurately before dredging for effective using of dredged soils. And it will be more effective, if the dredged soils are used with proper balance among each content of components with considering to the physicochemical properties of common soils.