• Journal of the Korean Chemical Society
• /
• v.24 no.2
• /
• pp.139-145
• /
• 1980

High spin iron(II) complexes of 1,4,8,11-tetraazacyclotetradecane (cyclam), a macrocyclic ligand, and 1,5,8,12-tetraazadodecane (3,2,3-tet), a noncyclic ligand, have been prepared. The reaction of low spin $[Fe(cyclam)(CH_3CN)_2](ClO_4)_2$ with chloride ion in methanol produces high-spin $[Fe(cyclam)Cl]ClO_4$. Although $[Fe(cyclam)(CH_3CN)_2](ClO_4)_2$ is low spin, $[Fe(3,2,3-tet)(CH_3CN)_2](ClO_4)_2$ isolated in the present study is high spin. This difference is explained in terms of the smaller constrictive effect exerted by the noncyclic ligand than the cyclic ligand. The isolation of $[Fe(cyclam)Cl]ClO_4$ provides evidences against the current view that the presence of either unsaturation or substituents on the macrocyclic ligands is necessary for the successful preparation of high spin five-coordinate iron (II) complexes. Reactions of $[Fe(cyclam)Cl]ClO_4\;and\;[Fe(3,2,3-tet)(CH_3CN)_2](ClO_4)_2$ with carbon monoxide yield low spin six-coordinate $[Fe(cyclam)Cl(CO)]ClO_4\;and\;[Fe(3.2,3-tet)(CH_3CN)(CO)](ClO_4)_2$, respectively.

• Journal of Convergence for Information Technology
• /
• v.11 no.8
• /
• pp.201-206
• /
• 2021

The aim of this study was to examined the dermatoxicity of ferrous chloride (FeCl2) and the antioxidative effect of Stachys japonica Miq (SJ) extract on FeCl2-induced cytotoxicity. For this study, superoxide anion-radical (SAR)-scavenging and superoxide dismutase (SOD)-like abilities with cell viability were done. FeCl2 showed a significant decrease of cell viability in dose-dependent manner, and it was mid-toxic. The caffeic acid showed a significant increase of cell viability against FeCl2-induced cytotoxicity. In the protective effect of SJ extract on FeCl2-induced cytotoxicity, it showed SAR-scavenging and SOD-like abilities with a significant increase of cell viability. From these results, the cytotoxicity of FeCl2 is correlated with oxidative stress, and SJ extract effectively protected the cytotoxicity of FeCl2 by antioxidative effect. Conclusively, the natural resources like SJ extract may be a useful fundamental materials for the development of an alternative antioxidant.

• Resources Recycling
• /
• v.27 no.3
• /
• pp.30-38
• /
• 2018

In this study, the behaviors of Fe selective chlorination in ilmenite ore by using PVC or $CO-Cl_2$ gas mixture as reducing agents under the condition of 1173 K, for 60 minutes were investigated. The weight loss ratio was 28% when PVC was applied as the reducing agent. The condensate formed at the outlet of reaction tube was identified as $FeCl_2$ by X-ray diffraction analysis. From these results, it was observed that iron in ilmenite ore reacted with HCl gas and Fe was selectively removed in the form $FeCl_2$. However, when $CO-Cl_2$ gas mixture was used as a reducing agent, the weight reduction ratio was 54%, and the condensate formed at the outlet of reaction tube after the experiment was estimated to be $FeCl_3$. It was observed that the ilmenite ore reacted with the $CO-Cl_2$ gas mixture and was simultaneously removed in the form of $FeCl_3$ and $TiCl_4$. However, the results of X-ray diffraction of ilmenite ore after the reaction showed that Fe was almost removed.

• Resources Recycling
• /
• v.17 no.6
• /
• pp.17-23
• /
• 2008

In order to simulate the leaching solution of copper sulfide ore in $FeCl_3$ solutions, synthetic solutions with composition of $FeCl_3$-$FeCl_2$-$CuCl_2$-CuCl-NaCl-HCl-$H_2O$ were prepared. The concentration of iron and copper chloride was varied from 0.1 to 1 m in synthetic solutions. The effect of composition on the mixed solution pH and potential at $25^{\circ}C$ was measured. When HCl concentration was constant, the increase of CuCl concentration increased solution pH. The increase of other solutes excluding HCl and CuCl decreased solution pH owing to the increase of the activity coefficient of hydrogen ion. A high CuCl concentration favored the redox equilibrium in the direction of Cu(I), while $FeCl_3$ had the opposite effect.

• Korean Journal of Materials Research
• /
• v.20 no.3
• /
• pp.111-116
• /
• 2010

Chloride-based fluxes such as NaCl-KCl are used in the refining of Al melt. The vapor pressure of the chloride is one of the fundamental pieces of information required for such processes, and is generally high at elevated temperatures. In order to measure the vapor pressure for chlorides, the apparatus for the transpiration method was assembled in the present study. The vapor pressure of $ZnCl_2$ and $FeCl_2$, which is related with the process of aluminum refining and the recovery of useful elements from iron and steel industry by-products, was also measured. In the measurement of vapor pressure by the transpiration method, the powder of $ZnCl_2$ or $FeCl_2$ in a alumina boat was loaded in the uniform zone of the furnace with a stream of Ar. The weight loss of $ZnCl_2$ and $FeCl_2$ after holding was measured by changing the flow rate of Ar gas (10 sccm -230 sccm), and the partial pressures of $ZnCl_2$ and $FeCl_2$ were calculated. The partial pressures within a certain range were found to be independent of the flow rate of Ar at different temperatures. The vapor pressures were measured in the temperature range of 758-901K for $ZnCl_2$ and 963-983K for $FeCl_2$. The measured results agreed well with those in the literature.

• Bulletin of the Korean Chemical Society
• /
• v.10 no.1
• /
• pp.27-30
• /
• 1989

Lithium has been intercalated into $FeMoO_4Cl$, and deintercalated from $LixFeMoO_4Cl$ both electrochemically and chemically. The inserted $Li^+$ ions are stabilized in the distorted octahedral field in interlayer space of $FeMoO_4Cl$. The crystal symmetry is reduced from tetragonal to monoclinic due to the reduction of ferric to ferrous ions in $LixFeMoO_4Cl$ upon lithium intercalation. From the magnetic and structural data, it has been concluded that the high-spin electronic configuration of $Fe^{2+}(d_{xz}^2{d_{y2}^1}{d_1}{2d_z^12}{\cdot}_y2)$, corresponding to $^5E_g$, group term in $D_{4h}$ symmetry, can be stabilized by the elongation of $FeO_4Cl_{2-}$octahedra in a weak ligand field.

• Journal of the Korean Magnetics Society
• /
• v.9 no.1
• /
• pp.17-22
• /
• 1999

Hexagonal M-type barium ferrite $BaFe_{12}O_{19}$ was prepared by a direct solid state reaction between $BaCO_3$ and ${\Alpha}-Fe_2O_3$ powders at temperatures ranging from 800 to 1000 $^{\circ}C$ in a nitrogen or air environment. The effects of NaCl on phase transformation of mixture of $BaCO_3$ and ${\Alpha}-Fe_2O_3$ to $BaFe_{12}O_{19}$ were studied using X-ray diffraction and M$\"{o}$ssbauer spectroscopy. Regardless of the environment for heat treatment or the added NaCl, two phases, BaFe and ${\Alpha}-Fe_2O_3$, coexist for samples heat treated at 800 $^{\circ}C$, but a single phase was observed from samples heat treated at 100$0^{\circ}C$ in both air and nitrogen environments. It was found that the addition of NaCl reduced the amount of $a-Fe_2O_3$ phase.hase.

• Korean Chemical Engineering Research
• /
• v.43 no.1
• /
• pp.76-79
• /
• 2005

Dry etching of NiFe, NiFeCo, and Ta for magnetic random access memory (MRAM) by inductively coupled plasmas (ICPs) of $Cl_2/Ar$ has been carried out. NiFe and NiFeCo showed maximum etch rates at a particular ICP source power, but the etch rate of Ta increased with the ICP source power. The etch rates of the magnetic thin films increased with the RF chuck power, but decreased with the operating pressure and the $Cl_2$ concentration. To avoid a corrosion problem by chlorine, the etched samples were rinsed with de-ionized water for 5 minutes after etching. The etch profile showed a clean and smooth surface at 50% $Cl_2$ concentration.

• Journal of the Korean Institute of Gas
• /
• v.2 no.2
• /
• pp.40-47
• /
• 1998

This study describes a synthesis of spinel-type $Fe_3O_4$ for decomposition of carbon dioxide, using $Fe_3O_4$ $7H_2O$ and NaOH, at $40^{\circ}C$ for 20 h. with change of their chemical equivalent ratio from 0.50 to 0.75, 1.00, 1.25 and 1.50, respectively. Addition of 0.1-1.00 mole percentage $NiCl_2,\;RhCl_3$ to the particles of $Fe_3O_4$, Prepared by reacting chemical equivalent ratio 1.00, afforced spinel $Fe_3O_4$. The structure of $Fe_3O_4$ and $NiCl_2,\;RhCl_3$-added $Fe_3O_4$ was investigated with XRD and SEM, respectively.

• Applied Chemistry for Engineering
• /
• v.24 no.1
• /
• pp.67-71
• /
• 2013

$FeCl_3$ has been used as an etchant for metal etching such as Fe, Cu, and Al. In the process of metal etching, $Fe^{3+}$ is reducted to $Fe^{2+}$ and the etching rate becomes slow and etching efficiency decreased. Waste $FeCl_3$ etchant needs to be regenerated because of its toxicity and treatment cost. In this work, HCl was initially mixed with the waste $FeCl_3$ and then, strong oxidants, such as $O_2$ and $H_2O_2$, were added into the mixed solution to regenerate the waste etchant. During successive etching and regeneration processes, oxygen-reduction potential (ORP) was continuously measured and the relationship between ORP and etching capability was investigated. Regenerated etchant using a two vol% HCl of the total etchant volume and a very small amount of $H_2O_2$ was very effective in recovering etching capability. During the etching-regeneration process, the same oxygen-reduction potential variation cannot be repeated every cycle since concentrations of $Fe^{2+}$ and $Fe^{3+}$ ions were continuously changed. It suggested that the control of etching-regeneration process based on the etching time becomes more efficient than that of the process based on oxygen reduction potential changes.