• Korean Journal of Plant Resources
• /
• v.21 no.4
• /
• pp.341-345
• /
• 2008

Two orchid species of Calanthe discolor Lindl. and C. discolor for. sieboldii (Decne.) Ohwi, which have different form flower color and size. They were crossed in mid April by artificial pollination, and the F1 hybrid seeds were collected mid October. Germination of seeds was investigated on pre-treatment of seeds and under the various environmental conditions. Germination was promoted by moisture absorption and ultrasonic treatment of seeds. Dark culture of F1 hybrid seeds enhanced germination and protocorm formation, and development into seedlings compared with light culture. Although, plant growth regulators such as NAA and BA had a slightly promotive effect on seed germination and protocorm growth, regenerated seeding were showed abnormal growth patterns. Regenerated F1 hybrid plantlets were successfully transferred to pot.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.4
• /
• pp.65-70
• /
• 2011

In this paper, we designed and implemented a PIFA(Planer Inverted F Antenna) and IFA(Inverted F Antenna) hybrid antenna for the data communication terminal such as smart phone. Studied hybrid antenna has multi-band characteristics by the simultaneous operation both PIFA and IFA under a feeding structure. VSWR measurement of implemented antenna was satisfied 3:1 over GSM900/USPCS/WCDMA band. Measured average gains and efficiencies were -2.19~-3.63 dBi and 43.31~60.33 % for the GSM900 band, and -2.16~-10.67 dBi and 8.56~60.78 % for the USPCS/WCDMA band.

• Journal of Welding and Joining
• /
• v.15 no.4
• /
• pp.126-135
• /
• 1997

$H_2/O_2$ 비에 따른 Hybrid HVOF 용사된 $Cr_3C_2$-7wt%(NiCr) 용사층의 특성 및 산화거동 This study was performed to investigate the influence of fuel/oxygen ratio (F/O=3.2, 3.0, 2.8) on the characteristics and the oxidation behavior of the hybrid-HVOF sprayed $Cr_3C_2$-7wt%NiCr coatings. Decomposition and the oxidation of the $Cr_3C_2$was occured during spraying. The degree of transformation from $Cr_3C_2$to $Cr_7C_3$ was increased with decreasing the F/O ratio. The microstructural differences of the as sprayed coating with F/O ratio can not be distinguished, However, large pores were diminished and then the coatings became dense by heat treatment. Microhardness of the as-sprayed specimen which sprayed with F/O=3.0 condition was hightest ($Hv_{300}$=1140) and the hardness was increased to 1500 after heat treatment at $600^{\circ}C$ for 50hrs in air. It was supposed that hardness was increased due to the formation of $Cr_2O_3$ within $Cr_3C_2$/$Cr_7C_3$matrix and the densification of coating layer during heat treatment. Apparent activation energy for oxidation was varied from 21.2 kcal$mol^{-1}K^{-1}$ to 23.8 kcal$mol^{-1}K^{-1}$ with respect to the F/O ratio. The surface morphology was changed to porous and oxide chusters were grown after oxidation $1000^{\circ}C$ for 50 hours by the aggressive evolution of gas phase ($CrO_3$ and$CO_2$). The oxide cluster was composed of Ni and Cr.

• International Journal of CAD/CAM
• /
• v.3 no.1_2
• /
• pp.13-17
• /
• 2003

Hybrid method of representing geometric entities as combination of boundary (B-rep) and functional (F-rep) representations is presented which can be used as a basis of solid modeling kernel. It contains whole functionality of classic B-rep kernel, and also supports enveloping (sweep of solid body). Principles and keysolutions are considered. Example of a real task that comes from gearing is provided.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.127.1-127.1
• /
• 2013

Recent experimental evidence that fluorinated graphene creates local magnetic moments around F adatoms has not been supported by semilocal density-functional theory (DFT) calculations where the adsorption of an F adatom induces no magnetic moment in graphene. Here, we show that such an incorrect prediction of the nonmagnetic ground state is due to the self-interaction error inherent in semilocal exchange-correlation functionals. The present hybrid DFT calculation for an F adatom on graphene predicts not only a spin-polarized ground state with a spin moment of ${\sim}1{\mu}_B$, but also a long-range spin polarization caused by the bipartite nature of the graphene lattice as well as the induced spin polarization of the graphene states. The results provide support for the experimental observations of local magnetic moments in fluorinated graphene.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.5
• /
• pp.343-346
• /
• 2000

Rye breeding using F$_1$ hybrid began about 30 years ago, when cytoplasmically inherited forms of male sterility (CMS) and corresponding nuclear restorers were detected. It is very important to produce inbred lines for making hybrid lines because of strong self-incompatibility in rye. Among the 456 rye germplasms used in hybrid breeding scheme, 24 lines (5.3%) had the above 60% of self-fertility, and six lines of them were selected for their good agronomic characteristics and were used for subsequent inbreeding program. The average self-fertility of selected six lines was 78.4%, ranging from 72.2 to 99.5%. Genetic analysis for the self-fertility using $F_2$ populations showed that the segregation of self-fertile and sterile plants in F$_2$populations could be fit into 3 to 1 ratio suggesting self-fertility in rye be controlled by one major gene. The four different self-fertile lines, PI237923, 5C11, 5G5 and Florida black, had the same self-fertility gene because their F$_2$ plants showed almost the same self-fertility as their parents and showed no genetic segregation.

• Journal of the Korean Ceramic Society
• /
• v.51 no.5
• /
• pp.430-434
• /
• 2014

$SiC_f$/SiC composites were prepared using the hybrid process of chemical vapor infiltration (CVI) and polymer impregnation and pyrolysis (PIP). Before the application of PIP, partially matrix-filled preform composites with different densities were fabricated by control of chemical vapor infiltration time and temperature. The changes of the final density of the $SiC_f$/SiC composites had a tendency similar to that of preform composites partially filled by CVI. Composites with lower density after the CVI process had a larger increment of density during the PIP process. Three types of microstructures were observed on the fractured surface of the composite: 1) well pulled-out fibers and lower density, 2) slightly pulled-out fibers and higher density, and 3) only bulk SiC. The different fractions and distributions of the microstructures could have an effect on the mechanical properties of the composites. In this study, $SiC_f$/SiC composites prepared using a hybrid process of CVI and PIP had density values in the range of $1.05{\sim}1.44g/cm^3$, tensile strength values in the range of 76.4 ~ 130.7 MPa, and fracture toughness values in the range of $11.2{\sim}13.5MPa{\cdot}m^{1/2}$.

• Journal of Environmental Science International
• /
• v.24 no.11
• /
• pp.1501-1511
• /
• 2015

As essential trace elements, copper and zinc play important roles in many physiological events in plants. In excess, however, these elements can limit plant growth. This study selected a heavy metal-tolerant plant by analyzing seed germination and biomass of alfalfa (Medicago sativa), canola (Brassica campestris subsp. napus var. nippo-oleifera), Chinese corn (Setaria italica), and a sorghum-sudangrass hybrid (Sorghum bicolor ${\times}$ S. sudanense), and determined heavy metal uptake capacity by analyzing biomass, chlorophyll a fluorescence, and heavy metal contents under high external copper or zinc levels. The seed germination rate and biomass of the sorghum-sudangrass hybrid were higher under copper or zinc stress compared to the other three plants. The plant biomass and photosynthetic pigment contents of the sorghum-sudangrass hybrid seedlings were less vulnerable under low levels of heavy metals (${\leq}50ppm$ copper or ${\leq}400ppm$ zinc). The maximum quantum yield of PSII ($F_v/F_m$) and the maximum primary yield of PSII ($F_v/F_o$) decreased with increasing copper or zinc levels. Under high copper levels, the decline in $F_v/F_m$ was caused only by the decline in $F_m$, and was accompanied by an increase in non-photochemical quenching (NPQ). The $F_v/F_m$ declined under high levels of zinc due to both a decrease in the maximum fluorescence ($F_m$) and an increase in the initial fluorescence ($F_o$), and this was accompanied by a marked decrease in photochemical quenching (qP), but not by an increase in NPQ. Accumulations of copper and zinc were found in both aboveand below-ground parts of plants, but were greater in the below-ground parts. The uptake capacity of the sorghum-sudangrass hybrid for copper and zinc reached 4459.1 mg/kg under 400 ppm copper and 9028.5 mg/kg under 1600 ppm zinc. Our results indicate that the sorghum-sudangrass hybrid contributes to the in situ phytoremediation of copper or zinc polluted soils due to its high biomass yield.

• Korean Journal of Breeding Science
• /
• v.41 no.3
• /
• pp.213-219
• /
• 2009

This study was carried out to establish breeding system for interspecific hybridization of Lilium using spontaneous meiotic polyploidization of $F_1$ OA hybrid and its progenies. Pollen viability and germination of $F_1$ OA interspecific hybrid showed variation by collection time, indicating that pollen grain in June, which was natural blooming season, had better viability and germination ability than in October. 2n-gametes from spontaneous meiotic polyploidization of OA hybrid were crossed with either diploid Asiatic or Oriental hybrid, and subsequent progenies crossed with Asiatic hybrid as female and OA hybrid as male showed the highest efficiency, where 2x-2x A$\times$OA produced 0.64 plants per cross combination, while 2x-2x, O$\times$OA and 2x-2x, OA$\times$A crosses produced 0.42 and 0.4 plant per ovary, and especially no progeny was obtained in 2x-2x, OA$\times$O cross combination. For the subsequent progeny production, a cross between diploid Asiatic hybrid as female and diploid OA hybrid as male was the best ploidy combination. Ploidy level of subsequent progeny derived from backcross with 2n-gametes of OA hybrid revealed that triploids from 2x-2x OA$\times$A, tetraploids from both 4x-2x, AA$\times$OA and OO$\times$OA, diploid from 2x-2x, O$\times$OA, and diploids or triploids from 2x-2x, A$\times$OA crosses were produced respectively.

• The Journal of Korean Society of Virology
• /
• v.30 no.3
• /
• pp.211-217
• /
• 2000

Nef is a lentiviral protein involved in pathogenesis of AIDS, but its molecular mechanism of action remains incompletely understood. Here we report the isolation of the interacting protein with the HIV-1 Nef, using the yeast two hybrid system for expression cloning. One of the positive colonies was selected as the final candidate for the interacting protein gene. The nucleotide sequencing revealed that this interacting protein is Human Ikaros/LyF-1. This protein interacted with the C-terminal region of Nef specifically in yeast system, not with the N-terminal region. This interaction was also confirmed by in vitro binding assay.