• 제목/요약/키워드: $EpCO_2$

검색결과 62건 처리시간 0.026초

감마프로브용 전단증폭기와 주증폭기의 개발과 성능 평가 (Development and Performance Test of Preamplifier and Amplifier for Gamma Probe)

  • 봉정균;김희중;이종두;권수일
    • 대한핵의학회지
    • /
    • 제33권1호
    • /
    • pp.100-109
    • /
    • 1999
  • 목적: 핵의학장비를 구성하는 신호처리단의 전단증 폭기와 주증폭기는 방사선의 에너지 정보를 주는 펄스를 분석하는데 중요한 부분이다. 이러한 신호처리부분들은 대부분 크기가 표준화된 상용의 Nuclear Instrument Module (NIM)을 사용한파. 그러나, NIM은 이동형 감마프로브에 사용하기에는 너무 부피가 커서 부적합한 편이다. 이를 위해 본 연구는 이동형 감마프로브에 적합한 소형화된 전단증폭기와 주증폭기를 자체 제작하여 성능평가를 하였다. 대상 및 방법: 본 연구에서 제작된 전단증폭기는 전하민감형 전단증폭기였으며, 주증폭기는 capacitor resistor-resistor capcitor (CR-RC) 회로를 이용하여 제작되었다. 제작 후 성능평가를 위해 $2"{\times}2"$ NaI(T1) 섬광체가 부착된 EP-047 (Bicron Saint-Gobain/Norton Industrial Ceramics Co., Ohio, U.S.A) 검출기와 $1"{\times}1"$ NaI(T1) 섬광체가 부착된 R1535 (Ha-mamatsu Photonics K.K., Electron Tube Center, Shizuoka-ken, Japan) 검출기를 다중채널분석기인 AccuSpec/A (Canberra Industries Inc., Meriden Conneticut, U.S.A)를 이용 에너지 스펙트럼을 얻었다. NIM은 TC 145 (Oxford Instruments Inc., Oak Ridge, U.S.A)와 TC241 (Oxford Instruments Inc., Oak Ridge, U.S.A)을 이용하였다. 에너지 스펙트럼은 37 kBq ($1{\mu}Ci$) Cs-137과 2.96 MBq ($80{\mu}Ci$) Tc-99m의 방사선원을 이용하여 250초씩 얻었다. 결과: 자체 제작한 진단증폭기와 주증폭기를 EP-047 검출기와 연결하여 얻은 Tc-99m (140 keV)과 Cs-137 (662 keV)의 에너지 분해능은 각각 12.92%, 5.01%이었으며, R1535 검출기를 연결하여 얻은 Tc-99m과 Cs-137의 에너지 분해능은 각각 13.75%, 5.19%이었다. 그리고 NIM을 EP-047 검출기와 연결하여 얻은 Tc-99m과 Cs-137의 에너지 분해능은 14.6%, 718%이었으나, R1535 검출기를 연결하여 얻은 Cs-137 에너지 스펙트럼은 광봉우리 위치가 변화되어 안정되지 못하였고, Tc-99m의 에너지 스펙트럼은 쉽게 얻을 수 없었다. 결론: 본 연구에서 자체 제작한 전단증폭기와 주증폭기는 광증배관의 종류에 관계없이 우수한 성능을 보여주었다. 결론적으로, 본 연구에서 제작한 전단증폭기와 주증폭기는 소형화된 계수용 감마프로브와 영상용 감마프로브에 활용하는데 유용할 것이라고 사료된다.

  • PDF

김치 유산균 배양물의 부상용 배합사료내 첨가시 넙치(Paralichthys olivaceus) 치어의 성장, 체조성 및 면역성 반응에 미치는 효과 (Effects of the Inclusion of Kimchi Lactic Acid Bacterial Culture in Extruded Pellets on the Growth, Body Composition and Immune Response of Juvenile Olive Flounder Paralichthys olivaceus)

  • 전규호;조성환;김희성;명성효;김현종;정원관;박범희;이금주
    • 한국수산과학회지
    • /
    • 제46권5호
    • /
    • pp.552-558
    • /
    • 2013
  • This study was performed to determine effects of the supplementation of Kimchi lactic acid bacterial culture in extruded pellets (EP) on the growth, body composition, blood chemistry and immune response of olive flounder Paralichthys olivaceus. Four hundred eighty individuals averaging 16.1 g were randomly distributed into 12, 180 L flow-through tanks (forty fish per tank). Four concentrations of Kimchi lactic acid bacterial culture (KL) were prepared: Control (0%), 0.1%, 0.2% and 0.5%. Three concentrations (0.1%, 0.2% and 0.5%) of Kimchi lactic acid bacterial culture were each diluted to 10% of EP weight and then fully absorbed by EP for 10 minutes. Each diet was fed to triplicate groups of fish. Fish were hand-fed to apparent satiation twice a day for 8 weeks. At the end of the 8-week feeding trial, the plasma lysozyme and bacterial activities of fish were determined. In addition, the cumulative mortality of fish was monitored for 8 days after their artificial infection with Edwardsiella tarda. The weight gain, specific growth rate, feed efficiency ratio, protein efficiency ratio, protein retention, hepatosomatic index and condition factor of fish were not affected by dietary supplementation with KL. None of the proximate composition, plasma parameters, lysozyme or bactericidal activities of fish was affected by dietary supplementation with KL. However, the cumulative mortalities of fish fed EP containing 0.1% and 0.5% Kimchi lactic acid bacterial culture were relatively low compared to that of fish fed the control diet. In conclusion, dietary supplementation with KL did not effectively improve growth, feed utilization, body composition, plasma chemistry, lysozyme, bactericidal activities or immune response of olive flounder after E. tarda infection under these experimental conditions.

대전지역 민방위 비상급수용 지하수에 대한 수리화학과 질소 및 황 동위원소 연구 (Hydrochemistry and Nitrogen and Sulfur Isotopes of Emergency-use Groundwater in Daeieon City)

  • 정찬호
    • 지질공학
    • /
    • 제13권2호
    • /
    • pp.239-256
    • /
    • 2003
  • 이 연구에서는 대전지역 민방위 비상급수용 지하수의 수리화학적 특성을 밝히고 질소 및 황 동위원소를 분석하여 질산성 질소와 황산염의 기원을 해석하고자 하였다. 지하수의 수질화학적 특성은 전반적으로 약산성화 되어 있으며, 전기전도도 값은 $142~903{\;}\mu\textrm{S}/cm$의 범위로 평균 $352{\;}\mu\textrm{S}/cm$을 보인다. 지하수의 화학적 유형은 $Ca-HCO_3$ 형에서 Ca-Cl ($SO_4,NO_3$) 형까지 넓게 분포한다. 지하수의 $CO_2$ 함량과 pH에 의해 결정되는 $EpCO_2$ 값을 유기오염의 지수로 활용하였다. 지역별 지하수의 성분을 비교하고 성분별 농도분포를 알아보기 위하여 박스-휘스커(Box-Whisker) 다이아그램과 등치선도를 작성하였다. 수리화학적 자료를 종합하면 동구와 중구, 대덕구 일대 구도심권의 지하수가 약산성의 높은 전기전도도 특성과 높은 $NO_3$, $SO_4$, $EpCO_2$ 분포를 보여 서구와 유성구에 비해 오염이 많이 진행된 상태를 보인다. 지하수 22개 시료에 대한 ${\delta}^{15}N$ 분석 값은 서구와 유성구의 지하수에서 ${\delta}^{15}N$ 값이 $+7.4~+9.6{\textperthousand}$ 범위를 보여 지하수내 질산성질소 오염은 생활하수의 가능성이 높다. 그리고 동구, 중구, 대덕구 등 구도심권 지하수의 ${\delta}^{15}N$ 값은 $+10.2~+23.5{\textperthousand}$의 범위를 보여 정화조에서의 누출수가 주요 오염원일 가능성이 있다. 그리고 지하수의 ${\delta}^{34}S$ 값은 $+3~13.4{\textperthousand}$의 범위를 보인다. 일부 지하수 시료는 황산염 환원반응을 거쳐 $10{\textperthousand}$이상의 높은 ${\delta}^{34}S$ 값을 보이고, $7{\textperthousand}$ 내외의 ${\delta}^{34}S$ 값을 보이는 지하수는 황철석과 대기기원 외에도 인위적 오염에 의한 황 성분의 유입 가능성을 배제할 수 없다.

Adsorption of Organic Compounds onto Mineral Substrate Prepared from Oyster Shell Waste

  • Jeon, Young-Woong;Jo, Myung-Chan;Noh, Byeong-Il;Shin, Choon-Hwan
    • Environmental Sciences Bulletin of The Korean Environmental Sciences Society
    • /
    • 제10권S_2호
    • /
    • pp.79-88
    • /
    • 2001
  • Humic acids react with chlorine to produce Trihalomethanes(THMs), known as carcinogens, during disinfection, the last stage in water purification. Currently, the removal of organic humic acids is considered the best approach to solve the problem of THM formation. Accordingly, the current study examined the adsorption of organic compounds of humic acids onto an inorganic carrier prepared from oyster shell waste. The adsorbent used was activated oyster shell powder(HAP) and silver ion-exchanged oyster shell powder(HAP-Ag), with CaCO$_3$ as the control. The adsorbates were phthalic acid, chelidamic acid, catechol, dodecylpyridinium chloride(DP), and 2-ethyl phenol(2-EP). The adsorption experiments were carried out in a batch shaker at $25^{\circ}C$ for 15 hours. The equilibrium concentration of the adsorbate solution was analyzed using a UV spectrophotometer and the data fitted to the Langmuir isotherm model. Since the solution pH values were found to be greater than the pKa values of the organic compounds used as adsorbates, the compounds apparently existed in ionic form. The adsorptive affinities of the organic acid and phenolic compounds varied depending on the interaction of electrostatic forces, ion exchange, and chelation. More carboxylic acids and catechol, rather than DP and 2-EP, were adsorbed onto HAP and HAP-Ag. HAP and HAP-Ag exhibited a greater adsorptive affinity for the organic compounds than CaCO$_3$, used as the control.

  • PDF

시판 넙치용 배합사료의 품질평가 (Quality Evaluation of Commercial Extruded Pellet Diet for Olive Flounder, Paralichtys olivaceus)

  • 지승철;문경수;유진형;이시우;김홍범;정관식
    • 한국수산과학회지
    • /
    • 제38권5호
    • /
    • pp.291-297
    • /
    • 2005
  • This study evaluated the quality of commercial extruded pellet (EP) diet of five companies (A, B, C, D and E) for olive flounder Paralichtys olivaceus by biochemical analyses, physical properties and growth performance. The proximate analyses of five EP diets showed $3.2-10.0\%$ of moisture, $49.3-55.5\%$ of crude protein, $4.6-14.7\%$ of crude lipid, $7.0-13.8\%$ of crude ash, $0.7-10.5\%$ of crude fiber, $10.0-27.3\%$ of itrogen free extract (NFE), 304.3-395.4kcal/100g of digestible energy (DE) and 6.1-7.1 of calorie/protein ratio (C/P). Peroxide value (POV) was highest in diet D (47.4 meq/kg) as compared to other diets which in the range of 4.0-11.7 meq/kg. Total amino acid contents were ranged from 46.54 to $55.46\%$ with the highest content in diet B and the lowest content in diet C. Essential amino acid of diet C was lowest $(7.43\%)$ as compared to other diets which in the range of $19.43-20.30\%$. Saturated fatty acid was higher in diet A $(37.65\%)$ followed by diet B $(36.32\%)$, diet E$(34.39\%)$, diet C$(30.95\%)$ and diet D$(30.10\%)$. EPA+DHA were highest in diet E$(30.78\%)$ and lowest in diet C$(15.48\%)$. The floating rate after 6 hours on the sea water was highest in diet C$(100\%)$ followed by diet B$(40\%)$ and A$(10\%)$. However, diets D and E were completely settled down after 1 and 2 hours, respectively. The range of relative expansion rate was $27.2-49.3\%$ for all diets and all reached the peak at 2-3 hours. The water absorption rate of diets C and D was lowest, and diet E was highest at 1 hour after deposition of sea water. Growth rate was higher in diet B$(22.3\%)$ and E$(21.3\%)$. Feed efficiency was higher in diet A$(109.7\%)$ and E$(105.3\%)$ and was significantly lowest in diet D$(80.7\%)$. The protein efficiency ratio was highest in diet E (2.72) and lowest in diet D (1.76). These results suggest that there is a necessity for improvement of nutrients balance and feed physical properties to fulfill the nutrient requirements and digestive characteristics of fishes in commercial EP diets.

Experimental and numerical study on tensile capacity of composite cable-girder anchorage joint

  • Xuefei Shi;Yuzhuo Zhong;Haiying Ma;Ke Hu;Zhiquan Liu;Cheng Zeng
    • Steel and Composite Structures
    • /
    • 제49권2호
    • /
    • pp.215-230
    • /
    • 2023
  • Cable-girder anchorage joint is the critical part of cable-supported bridges. Tensile-plate anchorage (TPA) is one of the most commonly used types of cable-girder anchorage joints in steel girder cable-supported bridges. In recent years, it has been proposed by bridge designers to apply TPA to concrete girder cable-supported bridges to form composite cable-girder anchorage joint (CCGAJ). In this paper, the mechanical performance of CCGAJ under tensile force is studied through experimental and numerical analyses. Firstly, the effects of the external prestressing (EP) and the bearing plate (BP) on the mechanical performance of CCGAJ were investigated through three tests. Then, finite element model was established for parametrical study, and was verified by the experimental results. Then, the effects of shear connector forms, EP, BP, vertical rebar rate, and perforated rebar rate on the tensile capacity of CCGAJ were investigated through numerical analyses. The results show that the tensile capacity of CCGAJ depends on the first row of PR. The failure mode of CCGAJ using headed stud connectors is to form a shear failure surface at the end of the studs while the failure mode using PBLs is similar to the bending of a deep girder. Finally, based on the strut-and-tie model (STM), a calculation method for CCGAJ tensile capacity was proposed, which has a high accuracy and can be used to calculate the tensile capacity of CCGAJ.

딸기 '설향' 품종의 MAP 및 ethyl pyruvate 처리의 유통기한 연장 효과 연구 (Effects of modified atmosphere packaging (MAP) and vaporized ethyl pyruvate (EP) treatment for the shelf life of 'Seolhyang' strawberries)

  • 김진세;박종우;박석호;최동수;김용훈;이수장;박천완;이정수;조병관
    • 한국식품저장유통학회지
    • /
    • 제24권3호
    • /
    • pp.351-360
    • /
    • 2017
  • 본 연구에서는 수분투과도가 높은 PA 필름과 낮은 LDPE 필름을 이용한 MAP의 감모율 및 곰팡이 발생률 차이, EP훈증 처리구와 미처리구의 곰팡이 발생률 차이를 분석하고자 하였고, MAP의 경우 active와 passive 기체조성을 하여 그 효과 차이를 알아보고자 하였다. PA 필름과 LDPE 필름 포장시 감모율의 차이는 통계적으로 차이가 없는 수준으로 LDPE가 낮았으나, LDPE 필름 내부에서 결로가 발생하여 수출 포장에서는 박스 젖음을 최소화 할 수 있는 PA 필름이 적정함을 확인하였다. 감모율이 높을 경우 당도와 산도가 높게 나타나기 때문에 MAP 대비 대조구에서 당도와 산도가 약간 높게 측정되었다. 초기 $CO_2$ 농도를 20%이상으로 active MAP 처리시 경도가 높게 유지되는 효과가 있으므로, passive MAP보다 유통에 유리할 것이라 판단된다. 딸기의 저장 중 발생한 곰팡이는 대부분 잿빛곰팡이병원균인 B. cinerea임을 배양을 통한 포자의 형상으로 확인하였으며, MAP에서는 기체조성이 호기성인 곰팡이의 성장을 방해하여 딸기 내부로만 균사가 자라는 것을 확인하였다. EP 처리도 딸기 외부의 균사 성장을 억제할 뿐 내부의 성장을 막지는 못하기 때문에, EP처리 없이 MA 포장만 사용할 경우와 차이가 없음을 확인하였다. 대조구 및 MA 저장 딸기의 곰팡이 균사는 손자국에서 시작되는 것을 확인하였으며, 수확과 선별시 수확하는 딸기가 B. cinerea 포자에 오염되지 않도록 주의한다면, 곰팡이 발생을 더욱 억제할 수 있으리라 예상된다. 이러한 결과에 비추어볼 때 감모율을 낮추고, 경도를 높게 유지하며, 결로와 곰팡이 발생도 억제할 수 있는 PA 필름을 이용한 active MA가 딸기의 유통에서 최적의 포장방법이라 판단된다.

박막 적층 구조 및 필링 속도가 스크린 프린팅 Ag/Polyimide 사이의 필 강도에 미치는 영향 (Effects of Film Stack Structure and Peeling Rate on the Peel Strength of Screen-printed Ag/Polyimide)

  • 이현철;배병현;손기락;김가희;박영배
    • 마이크로전자및패키징학회지
    • /
    • 제29권2호
    • /
    • pp.59-64
    • /
    • 2022
  • 연성인쇄회로기판에 사용되는 스크린 프린팅(screen-printing, SP) Ag/폴리이미드(polyimide, PI) 구조의 필 테스트 시 필링 속도 및 박막 적층 구조가 필 강도에 미치는 영향을 분석하기 위해, PI/SP-Ag, PI/SP-Ag/전해도금 Cu, 전해도금 Cu/SP-Ag/PI의 3가지 적층 구조에 대해 필링 속도에 따른 90° 필 테스트를 수행하였다. PI 박막을 필링하는 2가지 구조에서는 필링 속도에 상관없이 필 강도가 거의 일정하게 유지된 반면, Cu/Ag 금속 박막 필링 구조에서는 필링 속도가 증가할수록 필 강도가 크게 증가하는 경향을 보였다. 이는 필링 속도에 따른 90° 굽힘 소재의 소성변형에너지 차이에 기인한 것으로 판단된다. 인장속도에 따른 인장 시험 결과, 변형 속도 증가에 따른 Cu/Ag 금속 박막의 유동응력 및 인성 증가가 Cu/Ag/PI 구조에서의 필링 속도에 따른 금속 박막의 90° 굽힘 소성변형에너지 및 필 강도 증가의 주 원인으로 판단된다. 반면, 점탄성 소재인 PI의 경우 변형 속도에 따른 기계적물성 차이가 금속에 비해 상대적으로 작아서, PI/Ag 및 PI/Ag/Cu 구조에서는 필링 속도에 따른 PI의 90° 굽힘 소성변형에너지 및 필 강도 변화가 상대적으로 적은 것으로 판단된다.

폴리피롤을 고체전해질로 이용한 알루미늄 고체전해 캐패시터 (Aluminum Solid Electrolytic Capacitor Employing Polypyrrole as Solid Electrolyte)

  • 조준상;유남산;이상빈;박영서
    • 공업화학
    • /
    • 제8권5호
    • /
    • pp.784-789
    • /
    • 1997
  • 전도성 고분자인 폴리피롤(PPy)을 전해질로 하는 알루미늄(Al)고체전해 캐패시터를 제작하기 위하여 알루미늄 산화피막($Al_2O_3$) 위에 화학산화중합(CP)법으로 얇은 PPy층을 형성시키고, 이 층을 양극으로 이용하여 피롤(Py)을 전해산화중합(EP)시켰다. 캐패시터 특성에 영향을 미치는 중합조건을 조사한 결과, 지지전해질로서 sodium p-toluenesulfonate (TsONa)를 사용하고, 소자당 2.0~4.0 mA의 정전류를 인가, 전해중합 후 제작한 캐패시터의 전기적 특성 및 임피던스 특성이 가장 우수하였다.

  • PDF

특허 분석에 의한 가스 하이드레이트 제조 기술 동향 (Technology Trend for Gas Hydrate Production Method by the Patent Analysis)

  • 강성필;서유택;금영섭;안명희
    • 한국수소및신에너지학회논문집
    • /
    • 제19권2호
    • /
    • pp.171-181
    • /
    • 2008
  • There are several methods for the gas hydrate production such as spraying water with countercurrent gas flow, stirring water-gas mixture, and flowing water with micro-bubble, etc. These days it has been widely studied for the gas hydrate production method, having low energy consumption and high efficiency. In this paper, patents in the gas hydrate production method were gathered and analyzed. The search range was limited to the open patents of USA, European Union (EP), Japan (JP), and Korea (KR) from 1991 to 2007. Patents were gathered by using keywords searching and filtered by crucial criteria. The trends of the patents were analyzed by the years, countries, companies, and technologies.