• 광물과 암석
• /
• 제35권2호
• /
• pp.153-168
• /
• 2022

치악산 편마암복합체에서 방사성원소를 포함하고 있는 광물을 파악하고, 주변 지하수에 포함되어 있는 방사선원소(우라늄)와의 연관성을 확인하고자 암석학적 및 광물 화학 분석을 수행하였다. 현미경 및 전자현미경 분석 결과, 주 구성광물은 사장석, 흑운모, 석영, 알칼리장석, 녹니석 그리고 방해석이며, 부수광물은 스펜, 갈렴석, 인회석, 저어콘, 토라이트, 티탄철석, 황철석 그리고 방연석 등 총 14종을 확인하였다. 토라이트의 경우 거정의 갈렴석 내 ~1 mm의 크기로 소량 관찰된다. 희토류 원소를 많이 포함하고 있는 갈렴석은 각기 다른 3 가지 산출양상을 보인다. EPMA 분석 결과, 거정의 갈렴석에서는 TiO₂~1.70 wt.%, Ce₂O₃~11.86 wt.%, FeO~13.31 wt.%, MgO~0.90 wt.% 그리고 ThO₂~1.06 wt.% 원소들의 함량이 높게 나타나며, Al₂O₃ 17.35 ± 2.15 wt.% (n = 7), CaO 12.13 ± 1.81 wt.% (n = 7) 평균 함량이 가장 낮은 값을 보인다. 티탄철석을 둘러싸고 있는 스펜 집합체의 가장자리에 존재하는 갈렴석은 Al₂O₃~24.00 wt.%, Nd₂O₃~5.10 wt.%, Sm₂O₃~0.66 wt.%, Dy₂O₃~0.86 wt.% 그리고 Y₂O₃~1.38 wt.% 원소들의 함량이 높게 나타나며, TiO₂ 0.35 ± 0.21 wt.% (n = 11), Ce₂O₃ 5.25 ± 1.03 wt.% (n = 11), FeO 9.84 ± 0.26 wt.% (n = 11), MgO 0.12 ± 0.05 wt.% (n = 11) 그리고 La₂O₃ 1.49 ± 0.29 wt.% (n = 11) 등과 같이 평균 함량이 가장 낮은 값을 보인다. 모암의 기질부에서 관찰되는 갈렴석의 화학성분은 앞서 설명한 갈렴석의 중간 정도의 값을 가진다. 연구대상인 치악산 편마암복합체 내 미그마타이트질 편마암에는 주목할 만큼의 우라늄 함량을 가지는 광물이 발견되지는 않았다. 따라서 지하수에서 나타나는 우라늄의 기원과 주변 지질과의 연관성을 명확하게 밝혀내지는 못했다. 하지만 방사성 원소인 토륨 원소 및 희토류 원소를 다량 포함하는 갈렴석이 풍부하게 존재하는 것이 이번 연구결과로 확인되었다.

• 한국재료학회지
• /
• 제30권10호
• /
• pp.502-508
• /
• 2020

This paper focuses on the electrical properties and stability against DC accelerated aging stress of ZnO-V₂O₅-MnO₂-Nb₂O₅-Bi₂O₃-Co₃O₄-Dy₂O₃ (ZVMNBCD) varistor ceramics sintered at 850 - 925 ℃. With the increase of sintering temperature, the average grain size increases from 4.4 to 11.8 mm, and the density of the sintered pellets decreases from 5.53 to 5.40 g/㎤ due to the volatility of V₂O₅, which has a low melting point. The breakdown field abruptly decreases from 8016 to 1,715 V/cm with the increase of the sintering temperature. The maximum non-ohmic coefficient (59) is obtained when the sample is sintered at 875 ℃. The samples sintered at below 900 ℃ exhibit a relatively low leakage current, less than 60 mA/㎠. The apparent dielectric constant increases due to the increase of the average grain size with the increase of the sintering temperature. The change tendency of dissipation factor at 1 kHz according to the sintering temperature coincides with the tendency of the leakage current. In terms of stability, the samples sintered at 900 ℃ exhibit both high non-ohmic coefficient (45) and excellent stability, 0.8% in 𝚫E_B/E_B and -0.7 % in 𝚫α/α after application of DC accelerated aging stress (0.85 E_B/85 ℃/24 h).

• 한국세라믹학회지
• /
• 제46권2호
• /
• pp.200-210
• /
• 2009

It is necessary to minimize the mismatch of sintering shrinkage between dielectric ceramic and Ni inner electrode layers for the purpose of developing the ultra high-capacity multi layered ceramic condenser(MLCC). Thus, low temperature sintering of dielectric $BaTiO_3$ ceramic should be precedently investigated. In this work, the influence of the milling condition on sintering behavior and electrical properties of $BaTiO_3$ ceramics was investigated in the $BaTiO_3$(BT)-Mg-Dy-Mn-Ba system with borosilicate glass as a sintering agent. As milling time increased, specific surface area(SSA) of the powder increased linearly, while both sinterability and dielectric property were found to be drastically decreased with an increasing SSA. It was also revealed that the sinterability of the excessively milled $BaTiO_3$ ceramics could be recovered by increasing Ba content, rather than increasing glass addition. These results suggest that the sintering behavior of $BaTiO_3$ ceramics under the high SSA was more strongly dependent on the transient liquid phase caused by Ba addition, than the liquid phase from additional glass.

• 한국세라믹학회지
• /
• 제46권2호
• /
• pp.146-154
• /
• 2009

It is necessary to minimize the thickness of Ni inner electrode layer and to improve the coverage of inner electrode, for the purpose of developing the ultra high-capacity multi layered ceramic capacitor (MLCC). Thus, low temperature sintering of dielectric $BaTiO_3$ ceramic should be precedently investigated. In this work, the relationship between dielectric properties of MLCC and batch condition such as mixing and milling methods was investigated in the $BaTiO_3$(BT)-Dy-Mg-Ba system with borosilicate glass as a sintering agent. In addition, several chip properties of MLCC manufactured by low temperature sintering were compared with conventionally manufactured MLCC. It was found that low temperature sintered MLCC showed better DC-bias property and lower aging rate. It was also confirmed that the thickness of Ni inner electrode layer became thinner and the coverage of inner electrode was improved through low temperature sintering.

• 보존과학회지
• /
• 제6권1호
• /
• pp.15-30
• /
• 1997

전남지역 도요지에서 출토된 토기, 시유도편, 녹청자와 청자편의 제조기술과 산지추정은 X선회절분석, 유도결합 플라즈마 발광분석, 열기계적 분석을 통한 물리화학적 성질의 검토로 이루어졌다. 도편의 사용원료는 점토, 석영, 장석광물로 유사하지만 그 함량비는 출토지에 따라 약간의 차이가 있으며, 철분함량에서 토기, 흑갈유, 녹갈유 도편은 $4\~7\%$, 녹청자 및 청자편은 $2\~3\%$로 기종에 따라 두드러진 차이를 나타내고 있다 흑갈유, 녹청자의 구성광물은 $\alpha-Quartz$, mullite와 일부 tridymite, cristobalite로 이루어졌으며, 청자는 $\alpha-Quartz$, mullite만으로 구성되어 있다. 도편의 소성온도는 토기가 $1000\~1100^{\circ}C$, 흑갈유, 녹갈유, 녹청자 청자가 $l130\~1200^{\circ}C$ 정도로 추정되었다. 도편에 대한 출토지의 구분은 분석된 21개의 미량원소중 14개의 원소가 매우 근접되어 불가능하였으며, 도자기제조에 사용된 원료의 지질학적인 특성이 유사한 것으로 판단하였다. 이들 지역에서 출토된 도편의 특성원소는 Rb, Sr, V, Zr, Y, Nd, Sc, La, Ce, Nb, Sm, Eu, Dy, Yb로 14개이다. 영암의 도편은 Zn과 Fe원소에 의해 다른 지역에서 출토된 도편들과 명확히 구분되었고, 출토지가 다른 녹청자, 청자편은 동일한 범위에 군집되는 특징을 나타내어 사용원료가 비슷한 것으로 추정된다.

• 한국세라믹학회지
• /
• 제42권7호
• /
• pp.490-496
• /
• 2005

The electrical properties and stability of the varistors composed of ZnO-Pr$_{6}$O$_{11}$-CoO-Cr$_{2}$O$_{3}$-Dy$_{2}$O$_{3}$ system were investigated with sintering time in the range of 1$\~$3 h at 1350$^{\circ}C$ . As the sintering time was increased, the varistor voltage and leakage current increased, but the nonlinear exponent decreased. The varistors sintered for 1 h exhibited excellent nonlinearity, with a nonlinear exponent of 55.3 and a leakage current of 0.1 $\mu$A, whereas presented relatively low stability. The varistors sintered for 2 h exhibited not only high nonlinear exponent of 46.3, low leakage current of 0.3 $\mu$A, low dielectric dissipation factor of 0.0431, but also the highest stability, in which the variation rates of varistor voltage, nonlinear exponent, leakage current, dielectric constant, and dielectric dissipation factor were -3.0$\%$, -4.1$\%$, +3056.2$\%$, +5.1$\%$, and -12.5$\%$, respectively, after DC accelerated aging stress state of 0.95 V$_{1ma}$/150$^{\circ}C$/24 h. On the whole, the nonlinearity and stability of these varistors are greatly affected by the sintering time.

• 한국염색가공학회지
• /
• 제33권3호
• /
• pp.97-104
• /
• 2021

In this study, the dyeability of m-aramid fabric with various cationic dyes using two bath two step dyeing method were investigated. The exhaustion properties of Doracryl series recommend for aramid(Doracryl^® Red GL 100%(DR), Doracryl^® Blue GL 300%(DB), Doracryl^® Yellow XGRL 200%(DY)) and commercial cationic Synocryl series(Synocryl^® Red GRL ED(SR), Synocryl^® Blue GSL ED(SB), Synocryl^® Yellow 3RL ED(SY)) for acrylic were measured by using Dye-O-meter. In the presence of carrier, the exhaustions of Doracryl series were higher to those of Synocryl series and the opposite phenomenon was observed in the absence of carrier. And the severe migrations of cationic dyes to acetate, nylon and wool fabrics were observed without carrier.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2006년도 추계학술대회 발표 논문집
• /
• pp.22-25
• /
• 2006

Long lasting phosphor materials are in great demand for their applications in the area of light emitting diodes (LEDs), commercial displays and warning signals. After glow longevity, brightness, photo-resistance and chemical and environment stability are most important qualities that are desired for these materials. Alumina as host lattice with various rare earth elements has been found to be good at the same time inexpensive material for the synthesis of the phosphor materials. This communication explored the effect of mixed rare earth metal on the luminescence properties of these materials for the first time. Various permutations and combinations of $Sr^{2+}$ and $Ba^{2+}$ have been investigated in order to achieve robust and high luminescence characteristics in the tailored phosphor materials.

• The Korean Journal of Ceramics
• /
• 제1권2호
• /
• pp.91-95
• /
• 1995

Polycrystalline bismuth- and aluminum- substituted dysporsium and yttrium iron garnet (Bi2R3-xAlyFe5-yO12, R=Dy or Y, $0\leqx\leq3, \; 0\leqy\leq3$) films have been prepared by pyrolysis. The crystallization temperatures, the solubility limit of bismuth ions into the garnet phase, and magnetic and magneto-optic properties of the films have been investigated as a function of bismuth and aluminum concentration. It was found that the crystallization temperatures as a function of bismuth and aluminum concentration. It was found that the crystallization temperatures of these films rapidly decreased as bismuth concentration. It was found that the crystallization temperatures of these films rapidly decreased as bismuth concentration (x) increased up to x=1.5 and then remained temperatures of these films rapidly decreased as bismuth concentration (x) increased up to x=1.5 and then remained unchanged at x>1.5, whereas, showed no changes as aluminum concentration (y) increased up to y=1.0 and then gradually increased at y>1.0. The solubility limit of bismuth ions was x=1.8 when y=0 but increased to x=2.3 when y=1.0. It was demonstrated that the magnetic and magneto-optic properties of the dysprosium iron garnet films could be tailored by bismuth and aluminum substitution suitable for magneto-optic recording as follows. The saturation magnetization and coercivity data obtained for the films indicated that the film composition at which the magnetic compensation temperature became room temperature was y=1.2 when x=1.0. Near this composition the coercivity and the squareness of the magnetic hysteresis loop of the films were several kOe and unit, respectively. The Curie temperatures of the films increased with the increase of x but decreaed with the increase of y, and was 150-$250^{\circ}C$ when x=1.0 and y=0.6-1.4. The Faraday rotation at 633 nm of the films increased as x increased but decreased as y increased, and was 1 deg/$\mu\textrm{m}$ when x=1.0 and y=1.0. Based on the data obtained, the appropriate film composition for magneto-optic recording was estimated as near x=1.0 and y=1.0 or $BiDy_2AlFe_4O_{12}$.

• Bulletin of the Korean Chemical Society
• /
• 제34권2호
• /
• pp.374-378
• /
• 2013

Two novel binuclear metal-organic coordination complexes [$Cd_2(Hdpa)_4(bpy)_2$] (1), [$Dy_2(dpa)_2(bpy)_2(NO_3)_2-(H_2O)_2$](bpy) (2) (where $H_2dpa$ = biphenyl-2,2'-dicarboxylic acid, bpy = 2,2'-bipyridine) have been synthesized under hydrothermal conditions and characterized by single crystal X-ray diffraction, spectral method (IR), elemental analysis (EA), powder X-ray diffraction (XRD), electronic spectra (UV-vis), fluorescent in the solid state and thermogravimetric analysis (TGA). Complexes 1-2 crystallizes isomorphously in the Triclinic space group P-1. The ${\pi}-{\pi}$ stacking interactions and hydrogen-bonds play a vital role in determining the crystal packing and construction of the extended 3-D supramolecular network.