• 전기전자학회논문지
• /
• 제25권2호
• /
• pp.302-308
• /
• 2021

본 논문에서는 영상 처리용 12-비트의 10-MS/s 파이프라인 아날로그-디지털 변환기(ADC: analog-to-digital converter)가 제안된다. 제안된 ADC는 샘플-홀드 증폭기, 3개의 stage, 3-비트 플래시 ADC, 그리고 digital error corrector로 구성된다. 각 stage는 4-비트 flash ADC와 multiplying digital-to-analog ADC로 구성된다. 고해상도의 ADC를 위해 제안된 샘플-홀드 증폭기는 gain boosting을 이용하여 전압 이득을 증가시킨다. 제안된 파이프라인 ADC는 1.8V 공급전압을 사용하는 180nm CMOS 공정에서 설계되었고 차동 1V 전압을 가지는 1MHz 사인파 아날로그 입력신호에 대해 10.52-비트의 유효 비트를 가진다. 또한, 약 5MHz의 나이퀴스트 사인파 입력에 대해 측정된 유효비트는 10.12 비트이다.

• Journal of Microbiology and Biotechnology
• /
• 제31권5호
• /
• pp.705-709
• /
• 2021

Porphyromonas gingivalis (P. gingivalis) is a major bacterial pathogen that causes periodontitis, a chronic inflammatory disease of tissues around the teeth. Periodontitis is known to be related to other diseases, such as oral cancer, Alzheimer's disease, and rheumatism. Thus, a precise and sensitive test to detect P. gingivalis is necessary for the early diagnosis of periodontitis. The objective of this study was to optimize a rapid visual detection system for P. gingivalis. First, we performed a visual membrane immunoassay using 3,3',5,5'-tetramethylbenzidine (TMB; blue) and coating and detection antibodies that could bind to the host laboratory strain, ATCC 33277. Antibodies against the P. gingivalis surface adhesion molecules RgpB (arginine proteinase) and Kgp (lysine proteinase) were determined to be the most specific coating and detection antibodies, respectively. Using these two selected antibodies, the streptavidin-horseradish peroxidase (HRP) reaction was performed using a nitrocellulose membrane and visualized with a detection range of 10³-10⁵ bacterial cells/ml following incubation for 15 min. These selected conditions were applied to test other oral bacteria, and the results showed that P. gingivalis could be detected without cross-reactivity to other bacteria, including Streptococcus mutans and Escherichia fergusonii. Furthermore, three clinical strains of P. gingivalis, KCOM 2880, KCOM 2803, and KCOM 3190, were also recognized using this optimized enzyme immunoassay (EIA) system. To conclude, we established optimized conditions for P. gingivalis detection with specificity, accuracy, and sensitivity. These results could be utilized to manufacture economical and rapid detection kits for P. gingivalis.

• 대기
• /
• 제32권3호
• /
• pp.179-189
• /
• 2022

The purpose of this study is to build and evaluate a high-resolution (50 m) KMAPP (Korea Meteorological Administration Post Processing) reflecting building data. KMAPP uses LDAPS (Local Data Assimilation and Prediction System) data to detail ground wind speed through surface roughness and elevation corrections. During the detailing process, we improved the vegetation roughness data to reflect the impact of city buildings. AWS (Automatic Weather Station) data from a total of 48 locations in the metropolitan area including Seoul in 2019 were used as the observation data used for verification. Sensitivity analysis was conducted by dividing the experiment according to the method of improving the vegetation roughness length. KMAPP has been shown to improve the tendency of LDAPS to over simulate surface wind speeds. Compared to LDAPS, Root Mean Square Error (RMSE) is improved by approximately 23% and Mean Bias Error (MBE) by about 47%. However, there is an error in the roughness length around the Han River or the coastline. Accordingly, the surface roughness length was improved in KMAPP and the building information was reflected. In the sensitivity experiment of improved KMAPP, RMSE was further improved to 6% and MBE to 3%. This study shows that high-resolution KMAPP reflecting building information can improve wind speed accuracy in urban areas.

• Ocean and Polar Research
• /
• 제32권4호
• /
• pp.337-350
• /
• 2010

This study conducted sedimentological and geophysical surveys for 3 years (2006-2008) in southern Gyeonggi Bay, Korea to elucidate temporal changes in subaqueous dune morphology on a sand ridge trending northeast to southwest that has been excavated by marine sand mining. The sand ridge (~20 m in height, ~2 km in width and 3~4 km in length) has a steep slope on the NW side and a gentle slope on the SE side, creating an asymmetric profile. Large (10~100 m in length) and very large (>100 m in length) dunes occurring on the SE side of the ridge show a northeastward asymmetrical shape, whereas dunes on the NW side destroyed by marine sand mining display a southwestward asymmetry. The comparison between Flemming (1988)'s correlation and the height-length correlation of this study indicates that tidal current and availability of sand sediment are major controlling factors to the development and maintenance of dunes. Depth and sedimentary characteristics (grain size) are not likely to be major controlling factors, but indirectly influence dune growth by hydrological and sedimentary processes. The length and the height of dunes decrease toward the southeastern trough away from the crest of the ridge. These features result from the decrease of tidal current and sediment availability. The length and the height of dunes on the southeast side decrease gradually over time. This is a result of the interaction between tidal current and the decrease in sediment availability due to sediment extraction by marine sand mining. Marine sand mining has destroyed the dunes directly, causing irregular shapes of shorter length and lower height. The coarse fraction of suspended sediments is transported and deposited very close to the sand pit. By contrast, relatively fine sediments are transported by the tidal current and deposited over a wide range by the settling-lag effect, resulting in a decrease of sediment grain size in the area where suspended sediments are deposited. In addition, marine sand mining, decreases the height of dunes. Therefore, morphological and sedimentological characteristics of dunes around the sand pits will be significantly changed by future sand mining activities.

• 대한원격탐사학회지
• /
• 제37권3호
• /
• pp.503-514
• /
• 2021

쌀 수급 조절 정책의 합리적 수립을 지원하기 위해서는 벼 재배면적의 조기 추정이 필요하다. 본 연구는 국내 벼 주산지인 김제시를 대상으로 Sentinel-1 위성영상을 활용하여 이앙이 마무리되는 7월 초순 벼 재배면적을 조기에 추정하기 위해 최적의 훈련자료 수집을 위한 무인기(UAV) 영상 활용 방안을 제시하고자 수행하였다. 5월부터 7월 초까지 수집한 Sentinel-1 위성영상은 ESA에서 제공하는 SNAP(SeNtinel application platform, Version 8.0)프로그램으로 전처리하고 팜맵을 활용하여 농경지만을 추출하였다. 벼 재배지 중심 지역과 벼·콩 혼재지 무인기 영상 촬영 영역을 혼합하여 훈련자료로 선정하여 김제시 전체 벼 재배지를 추정한 결과, 정확도와 카파 계수는 각각 89.9%, 0.774로 가장 좋은 결과를 보였는데, 이는 김제시 전역을 대상으로 무작위 표본조사를 수행하여 분류한 결과와 비교 시 전체 정확도 1% 내외, 카파 계수 0.02~0.04 범위에서 차이를 보여 벼 재배지 조기 추정을 위한 무인기 영상 활용 가능성을 확인할 수 있었다.

• 한국세라믹학회지
• /
• 제53권3호
• /
• pp.367-375
• /
• 2016

A novel strategy for the synthesis of $CoSb_2$ nanoparticles is demonstrated via preparation of novel organometallic complexes. Hydrated cobalt oleate (CoOl) and non-hydrated antimony oleate (SbOl) complexes are synthesized as precursors. The $CoSb_2$ nanoparticles are prepared by hot injection, which involves thermolysis of CoOl and SbOl in a non-coordinating solvent at $320^{\circ}C$. The coordination modes and distinct thermal behaviors of the intermediate non-hydrated SbOl complexes are comparatively investigated by thermo-analytical techniques. When the reaction temperature is increased, the particle size is found to increase linearly. The crystallinity of the $CoSb_2$ nanoparticles prepared at $250^{\circ}C$ is amorphous phase without any peaks. $CoSb_2$ structural peaks start to appear at $300^{\circ}C$ and dominant peaks with high crystallinity are synthesized at $320^{\circ}C$. The potential chemical structures of non-hydrated SbOl and their reaction mechanisms by thermolysis are elucidated. The elemental composition and crystallographic structure of $CoSb_2$ nanoparticles suggest a bimodal interaction of the organic shell and the nanoparticle surface, with a chemical absorbed inner layer and physically absorbed outer layer of carboxylic acid.

• 한국의류산업학회지
• /
• 제20권3호
• /
• pp.266-278
• /
• 2018

This study investigated the transformation of the Chanel jacket by looking at clothing design and constructional components. This study explored Chanel jacket's designs from 2001 S/S to 2016-17 F/W, and collected designs from Samsung Design Net and Vogue. The study used 690 designs with the following results. First, in the silhouette of the Chanel jacket, straight silhouette and hourglass silhouette had the most; in addition, in the length, hip line and under hip line were in order. Second, in case of collar and neckline, the form of a non-collar was the most and revealed the persistence of round neckline which is the basic style of a Chanel jacket. Third, in the shape of sleeves, the loose-fit straight sleeves, wide sleeves, and cocoon sleeves appeared most often. In method of closure, button, zipper were in order, and snaps or without closure appeared. Fourth, in the form of braids, various forms such as twisted yarns, leashes, or lace were used, and patch pockets were mainly used in pockets. Chanel maintains its original design by using various methods. Chanel tried to improve activity and functionality through silhouettes, lengths, necklines, and sleeves. The unchanging expression of the world of Chanel will continue to display and inherit future value. This study can provide Chanel's unique characteristics and new ideas that can transform their origins for jacket design.

• International Journal of Aeronautical and Space Sciences
• /
• 제17권3호
• /
• pp.442-453
• /
• 2016

A significant source of vibration in helicopters is the main rotor system, and it is a technical challenge to reduce the vibration in order to ensure the comfort of crew and passengers. Several types of passive devices have been applied to conventional helicopters in order to reduce the vibration. In recent years, helicopter manufacturers have increasingly adopted active vibration control systems (AVCSs) due to their superior performance with lower weight compared with passive devices. AVCSs can also maintain their performance over aircraft configuration and flight condition changes. As part of the development of AVCS software for light civil helicopter (LCH) applications, a test bench is constructed and vibration control tests and simulations are performed in this study. The test bench, which represents the airframe, is excited using a pair of counter rotating force generators (CRFGs) and a multiple input single output (MISO) AVCS that consists of three accelerometer sensors and a pair of CRFGs; a filtered-x least mean square (LMS) algorithm is applied for the vibration reduction. First, the vibration control tests are performed with uniform sensor weights; then, the change in the control performance according to changes in the sensor weight is investigated and compared with the simulation results. It is found that the vibration control performance can be tuned through adjusting the weights of the three sensors, even if only one actuator is used.

• The Journal of Advanced Prosthodontics
• /
• 제12권3호
• /
• pp.107-113
• /
• 2020

PURPOSE. The aim of this study was to examine the importance of the defect-free scanning of a scan body by assessing the accuracy of virtual implant positioning in computer-aided design (CAD) software when the scan body image is improperly scanned. MATERIALS AND METHODS. A scan body was digitized in a dentiform model using an intraoral scanner, and scanned images with differing levels of image deficiency were generated: 5%, 10%, and 15% deficiency in the flat or rounded area. Using a best-fit image matching algorithm on each of the deficient scan body images, corresponding virtual implants were created. The accuracy of the implant position was evaluated by comparing the linear and angular discrepancies between the actual and virtual positions of the implant. Kruskal-Wallis tests and Mann-Whitney U tests with Bonferroni correction were used to determine the statistical differences among the seven scanned image deficiency groups (α=.05). RESULTS. In general, the linear and angular discrepancies of the implant position in the software increased as the deficiency of the scan body images increased. A 15% scan body image deficiency generated larger discrepancies than deficiency of 5% and 10%. The difference of scan defect position, flat or rounded area, did not affect the accuracy of virtual implant orientation at 5% and 10% deficiency level, but did affect the accuracy at 15% deficiency level. CONCLUSION. Deficiencies in the scanned images of a scan body can decrease the accuracy of the implant positioning in CAD software when the defect is large, thus leading to the incorrect fabrication of implant prostheses.

• 한국대기환경학회지
• /
• 제28권3호
• /
• pp.273-281
• /
• 2012

The government is carrying forward a sustainable development which reduces green-house gas and environmental pollution by preparing 'Low Carbon Green Development' policy basis as a new paradigm of national development. This study aims to understand the status of atmosphere contamination which Seoul has by finding correlation among social, economical indexes and carbon, the humanities and social characteristic materials which best express types of city and correlation and to suggest implications. According to the results of the analysis, first the carbon emission volume of Seoul recorded 0.56 ppm, Jongno, Jung-Gu, Kuro, Kangnam and Songpa were more than the average of Seoul and Kwangjin-Gu & Kangbuk-Gu, relative north east regions, Yeongdeungpo-Gu and Dongjak-Gu, south west regions showed lower CO occurrences. Second, according to the correlation and factor analysis, elements which affect CO emission volume of Seoul are largely represented by regional level, traffic level and development density level. Third, when the importance of influence factors based on the analyzed standard coefficient by a regression model, traffic and development density level were most important by recording traffic level (0.967), environmental level (0.385), regional level (0.530) and development density (0.561). Consequently, it was revealed that the traffic level most affected CO emission.