• Korean journal of applied entomology
• /
• v.51 no.4
• /
• pp.421-429
• /
• 2012

The developmental time period of Aphis gossypii was studied in laboratory (six constant temperatures from 15 to $30^{\circ}C$ with 50~60% RH, and a photoperiod of 14L:10D) and in a cucumber plastic house. The mortality of A. gossypii in the laboratory was high in the 2nd (20.0%) and 3rd stage(13.3%) at low temperature but high in the 3rd (26.7%) and 4th stage (33.3%) at high temperatures. Mortality in the plastic house was high in the 1st and 2nd stage but there was no mortality in the 4th stage at low temperature. The total developmental period was longest at $15^{\circ}C$ (12.2 days) in the laboratory and shortest at $28.5^{\circ}C$ (4.09 days) in the plastic house. The lower threshold temperature at the total nymphal stage was $6.8^{\circ}C$ in laboratory. The thermal constant required to reach the total nymphal stage was 111.1DD. The relationship between the developmental rate and temperature fit the nonlinear model of Logan-6 which has the lowest value for the Akaike information criterion(AIC) and Bayesian information criterion(BIC). The distribution of completion of each development stage was well described by the 3-parameter Weibull function ($r^2=0.89{\sim}0.96$). This model accurately described the predicted and observed outcomes. Thus it is considered that the model can be used for predicting the optimal spray time for Aphis gossypii.

• Journal of Korean Society of Forest Science
• /
• v.79 no.2
• /
• pp.144-161
• /
• 1990

Pine forest communities developed in Mt. Palgong, southeastern Korea, were studied phytosociologically, with special reference to multiple management of local forests, and were classified into two communities, Pinus densiflora - Quercus mongolica community(I : mountain forest) and P. densiflora-Climbing plants community (II : valley forest) and six subgroups accompanied by several subgroups. Judging from the coincidence method, the division of communities (vegetation units) was closely related to altitude and topography. Based on vegetation units, a vertical distribution map of pine forest communities was prepared. The species composition(%) of pine forest communities under stratification, in upper and lower tree layer, teas I higher than II, in middle and shrubs lacer II higher than I (Total : Upper 15.5%, Middle 28.4%, Lower 34.6%. Shrubs 21.5%. Sum of mean coverage%i of understory vegetation was II twice as high as I (Total. shrubs 28.4%. forbs 11.4%, Graminoids 11.8%, ferns 1.0%). Based on constance, coverage and d.b.h. class etc., an actual growth and occurrence table of tree species and understory vegetation by vegetation unity were prepared, and could assume a criterion for judging potential dominance-growth conditions.

• Analytical Science and Technology
• /
• v.19 no.3
• /
• pp.263-271
• /
• 2006

The levels of total PCBs, Co-PCBs and PCDD/Fs in the transformer insulation oil samples obtained using GC/ECD and HRGC/HRMS were ranged from N.D. to 77.3 ppm, from 0.0863 to 2.49 ppm and from N.D. to 0.00241 ppm, respectively. In terms of WHO-TEQ values, Co-PCBs and PCDD/Fs were ranged from 23.3 to 600 pgTEQ/g and from N.D. to 128 pgTEQ/g, respectively (${\Sigma}Co$-PCBs+PCDD/Fs concentration was calculated 24.4~728 pgTEQ/g). Although, the contribution of PCDD/Fs was below 12% in total TEQ concentration, it is suggested contamination of PCDD/Fs in transformer insulation oils. Among 10 samples, 4 samples showed higher concentration than 2 ppm (specific waste criterion of Korea) and Aroclor 1242, 1248, 1254 and 1260 was detected in samples as a single or mixture of Aroclor. It was shown reliable relationship between concentration of Co-PCBs and those of PCDD/Fs (p<0.003), however, was not shown between production year of transformer and concentration of PCBs. The distribution pattern of Co-PCB congeners showed that the ratios of mono-ortho substituted congeners were higher than non-ortho substituted congeners. Among that, PCB-118 congener was predominant. In addition, the OCDD congener was predominated in PCDD/Fs congeners as above 53%. Moreover, the congener pattern of Co-PCBs was similar to that of Aroclor as well as ambient air, which suggested that PCBs volatilization from transformer insulation oil affected the pattern of Co-PCBs in ambient air.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.43 no.6 s.312
• /
• pp.101-109
• /
• 2006

Recently, according to the number of internet in widely use and the development of the related application program, the distribution and use of multimedia content(text, images, video, audio etc.) is very easy. Digital signal may be easily duplicated and the duplicated data can have same quality of original data so that it is difficult to warrant original owner. For the solution of this problem, the protection method of copyright which is encipher and watermarking. Digital watermarking is used to protect IP(Intellectual Property) and authenticate the owner of multimedia content. In this paper, the proposed watermarking algerian embeds watermark into multiple lower bitplanes of digital image. In the proposed algorithm, original and watermark images are decomposed to bitplanes each other and the watermarking operation is executed in the corresponded bitplane. The position of watermark image embedded in each bitplane is used to the watermarking key and executed in multiple lower bitplane which has no an influence on human visual recognition. Thus this algorithm can present watermark image to the multiple inherent patterns and needs small watermarking quantity. In the experiment, the author confirmed that it has high robustness against attacks of JPEG, MEDIAN and PSNR but it is weakness against attacks of NOISE, RNDDIST, ROT, SCALE, SS on spatial domain when a criterion PSNR of watermarked image is 40dB.

• Tunnel and Underground Space
• /
• v.26 no.2
• /
• pp.59-67
• /
• 2016

In this paper, we perform a numerical analysis to evaluate the potential of fault reactivation during gas production from hydrate bearing sediments and the moment magnitude of induced seismicity. For the numerical analysis, sequential coupling of TOUGH+Hydrate and FLAC3D was used and the change in effective stress and consequent geomechanical deformation including fault reactivation was simulated by assuming that Mohr-Coulomb shear resistance criterion is valid. From the test production simulation of 30 days, we showed that pore pressure reduction as well as effective stress change hardly induces the fault reactivation in the vicinity of a production well. We also investigated the influence of stress state conditions to a fault reactivation, and showed that normal fault stress regime, where vertical stress is relatively greater than horizontal, may have the largest potential for the reactivation. We tested one simulation that earthquake can be induced during gas production and calculated the moment magnitude of the seismicity. Our calculation presented that all the magnitudes from the calculation were negative values, which indicates that induced earthquakes can be grouped into micro-seismic and as small as hardly perceived by human beings. However, it should be noted that the current simulation was carried out using the highly simplified geometric model and assumptions such that the further simulations for a scheduled test production and commercial scale production considering complex geometric conditions may produce different results.

• Journal of Korean Ophthalmic Optics Society
• /
• v.21 no.1
• /
• pp.61-68
• /
• 2016

Purpose: This study investigated differences in stereoscopic fusional area between those with good and poor stereo acuity in viewing stereoscopic displays. Methods: Stereo acuity of 39 participants (18 males and 21 females, $23.6{\pm}3.15years$) was measured with the random dot stereo butterfly method. Participants with stereo-blindness were not included. Stereoscopic fusional area was measured using stereoscopic stimulus by varying the amount of horizontal disparity in a stereoscopic 3D TV. Participants were divided into two groups of good and poor stereo acuity. Criterion for good stereo acuity was determined as less than 60 arc seconds. Measurements arising from the participants were statistically analyzed. Results: 26 participants were measured to have good stereo acuity and 13 participants poor stereo acuity. In case of the stereoscopic stimulus farther than the fixation point, threshold of horizontal disparity for those with poor stereo acuity were measured to be smaller than the threshold for those with good stereo acuity, with a statistically significant difference. On the other hand, there was no statistically significant difference between the two groups, in case of the stereoscopic stimulus nearer to the fixation point. Conclusions: In viewing stereoscopic displays, the boundary of stereoscopic fusional area for the poor stereo acuity group was smaller than the boundary of good stereo acuity group only for the range behind the display. Hence, in viewing stereoscopic displays, participants with poor stereo acuity would have more difficulty perceiving the fused image at farther distances compared to participants with good stereo acuity.

• Korean Journal of Cognitive Science
• /
• v.25 no.4
• /
• pp.385-416
• /
• 2014

In this study, memory for emotional words was compared between extraverts and introverts, employing signal detection analysis to distinguish differences in discriminative memory and response bias. Subjects were presented with a study list of emotional words in an encoding session, followed by a recognition session. Effects of task difficulty were examined by varying the nature of the encoding task and the intervals between study and test. For an easy task, with a retention interval of 5 minutes (Study I), introverts exhibited better memory (i.e., higher d') than extraverts, particularly for low-frequency words, and response biases did not differ between these two groups. For a difficult task, with a one-month retention period (Study II), performance was poor overall, and only high-frequency words were remembered; also extraverts adopted a more liberal criterion for 'old' responses (i.e., more hits and more false alarms) for positive emotional-valence words. These results suggest that as task difficulty drives down performance, effects of internal control processes become more apparent, revealing differences in response biases for positive words between extraverts and introverts. These results show that extraversion can distort memory performance for words, depending on their emotional valence.

• Journal of Food Hygiene and Safety
• /
• v.13 no.4
• /
• pp.388-393
• /
• 1998

Recently there has been an increasing amount of foreign livestock products distributed in the domestic market due to the market opening. Some vicious dealers sell the foreign beef in the trade name of the native beef during the final distribution step to arouse the social criticism frequently. In this report, we investigated a method to distinguish the native beef from the foreign one scientifically using the PCR-RAPD, a recent gene technique. Hygienical safety was also examined using a microbiological test for toxicity of Escherichia coli 0157:H7 and the food poisoning bacteria. The conditions of DNA amplification for the PCR analysis were $1{\times}Taq$ polymerase buffer, 1.5 mM $MgCl_2,\;50\;\mu\textrm{M}$ dNTP, 100 ng primers, 2.5 unit Taq polymerase and 5~20 ng template DNA, with the fmal volume of $50\;\mu\textrm{\ell}$. The size of the amplified product was detected mostly in the range of 0.5~2.0 kbp. The size of DNA, gene marking factor, which could be a criterion distinguishing the native beef from the foreign one, appeared approximately 1.2 kbp. The native beef was distinguished from the foreign beef with more than 90% of confidence by the gene marking factor. This method was expected to be useful in the breed discrimination between the native beef and the foreign one. The hygienical test results showed that, fortunately, neither Salmonella spp. and Listeria monocytogenes which form a principal cause of the food poisoning nor Enterohemorrhagic Escherichia coli : EHEC which have provoked a recent social disturbance, were detected at all.

• Journal of Broadcast Engineering
• /
• v.13 no.4
• /
• pp.452-462
• /
• 2008

In this paper, we address issues associated with the real-time implementation of the MPEG-1/2 Layer-II (or MUSICAM) and MPEG-4 ER-BSAC decoders for Digital Multimedia Broadcasting (DMB) on TMS320C64x+ that is a fixed-point DSP processor with a clock speed of 330 MHz. To achieve the real-time requirement, they should be optimized in different steps as follows. First of all, a C-code level optimization is performed by sharing the memory, adjusting data types, and unrolling loops. Next, an algorithm level optimization is carried out such as the reconfiguration of bitstream reading, the modification of synthesis filtering, and the rearrangement of the window coefficients for synthesis filtering. In addition, the C-code of a synthesis filtering module of the MPEG-1/2 Layer-II decoder is rewritten by using the linear assembly programming technique. This is because the synthesis filtering module requires the most processing time among all processing modules of the decoder. In order to show how the real-time implementation works, we obtain the percentage of the processing time for decoding and calculate a RMS value between the decoded audio signals by the reference MPEG decoder and its DSP version implemented in this paper. As a result, it is shown that the percentages of the processing time for the MPEG-1/2 Layer-II and MPEG-4 ER-BSAC decoders occupy less than 3% and 11% of the DSP clock cycles, respectively, and the RMS values of the MPEG-1/2 Layer-II and MPEG-4 ER-BSAC decoders implemented in this paper all satisfy the criterion of -77.01 dB which is defined by the MPEG standards.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.58-65
• /
• 2016

This study was a preparatory experiment aimed the development of membrane scaffolds for tissue engineering. A PCL composite solution contained sodium chloride(NaCl). PCL porous membrane scaffolds were formed on a glass casting plate using a film applicator and immersed in distilled water to remove the NaCl reaching after drying. NaCl was used as a pore former for a 3 dimensional pore net-work. The dry condition parameters were $4^{\circ}C$, room temperature (RT) and $40^{\circ}C$ for each different temperatures in the drying experiment. SEM revealed the morphology of the pores in the membrane after drying and evaluated the in vitro cytotoxicity for basic bio-compatibility. The macro and micro pores existed together in the scaffold and showed a 3-dimensional pore net-working morphology at RT. The in vitro cytotoxicity test result was "grade 2" in accordance with the criterion for cytotoxicity by ISO 10993-5. The dry condition affected the formation of a 3 dimensional pore network and micro and macro pores. Therefore, these results are expected provide the basic process for the development of porous membrane scaffolds to control degradation and allow drug delivery.