• Korean Journal of Materials Research
• /
• v.5 no.5
• /
• pp.583-597
• /
• 1995

We investigated the effect of the oxygne partial pressure on the phase stability of B $i_{2}$S $r_{2}$Ca C $u_{2}$ $O_{8+x}$ and B $i_{2}$S $r_{2}$C $a_{2}$C $u_{3}$ $O_{10+x}$ at 82$0^{\circ}C$. As the oxygen pressure decreased, B $i_{2}$Sr/sb 2/CaC $u_{2}$ $O_{8+x}$ melted at 2.2$\times$10$^{-3}$ atm $O_{2}$. In the case of the B $i_{1.7}$P $b_{0.4}$S $r_{2}$C $a_{2}$ $O_{10+x}$, it started to decompose into theree phases of B $i_{2}$S $r_{2}$Cu $O_{6+y}$, $Ca_{2}$Cu $O_{3}$ and C $u_{4}$ $O_{3}$ and C $u_{4}$ $O_{3}$ at 8.0$\times$10$^{-3}$ atm $O_{2}$ and was completely decomposed at 4.3$\times$10$^{-3}$ atm $O_{2}$ B $i_{2}$S $r_{2}$C $a_{2}$C $u_{3}$ $O_{10+x}$ phase was not formed by the solid state reaction from the mixutre of $i_{2}$S $r_{2}$CaCu.sub 2/ $O_{8+x}$, $Ca_{2}$Cu $O_{3}$ and CuO down to 2.2$\times$10.sub -3/ atm O.sub 2/ but formed by the solidifciation of the formed from the mixture of the intermediate compounds in the Bi-Sr-Ca-Cu-O system and the fromation temperature of Bi.sub 2/S $r_{2}$C $a_{2}$Cu.$_{3}$ $O_{10+x}$ can be lowered by reducing oxygen partial pressure.e.e.ure.e.e.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.4 no.2
• /
• pp.148-156
• /
• 1994

Three composition in the system of $YO_{1.5}-BaO-CuO$ were grown using a cold crucible (skull) melting technique with a 50 kW R.F. induction generator operating at 4 MHz as the power source. The starting materials were prepared by conventional ceramic powder processing methods, loaded into the skull, and melted at about $1200^{\circ}C$. For this study, compositions near the $YBa_2Cu_3O_X$ region were selected. The growth rates used ranged from 4 cm/hr to 0.25 cm/hr. The relation between the microstructures and the starting composition of each ingot was determined using metallograph, X-ray diffraction, and energy dispersive X-ray analysis. Both $YBa_2Cu_3O_X$ and $Y_2BaCuO_5$ needle-shaped crystals, aligned with the growth direction, were formed in the $CuO-BaCuO_2$ eutectic matrix of the $YBa_2Cu_7O_x and YBa_5Cu_{11}O_x$ ingot.

• Proceedings of the Korean Magnestics Society Conference
• /
• 1995.10a
• /
• pp.98-99
• /
• 1995

• Journal of the Mineralogical Society of Korea
• /
• v.4 no.1
• /
• pp.43-50
• /
• 1991

Two solid solution-type phases has been experimentally found in the quaternary system Cu-Fe-Sn-S:$(Fe, Cu, Sn)_{1+x}$ and $Cu_{2-x}Fe_(1+x}SnS_4$. These solid solutions are stable around the CuS-FeS-SnS referecne plane in the composition tetrahedron. One is the sphalerite-type monosulfide solid solution which has a extensive stability range with varying degrees of sulfur/metal ratio 9.7-1.0/1.0. The other is tetrahedrite-type phase $Cu_{2-y)Fe_{1+y}SnS_4(y_{max}=0.4)$ which is stable along the $Cu_2FeSnS_4-FeS$ tie line, but shows no phase transformation in the subsolidus range and decomposes incongruently at the range of 835-862${\circ}C$, depending on the compositional variation. Particularly, the latter phase shows the characteristic superstructure reflections, indicating that it is a derivative of sphalerite structure. The stability field of these two sphalerite-type phases are defined on the basis of diffraction pattern and optical homogeneity of the synthetic materials at the temperature range of 700-400${\circ}C$.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.4
• /
• pp.172-175
• /
• 2003

We have investigated effects of the lattice mismatch between the LPE films and the substrates. We have grown $La_{2-x}Sr_{x}CuO_{4}$(x=0.1 to 0.15) single crystalline films on single crystalline substrates having different lattice parameter ratio c/a e.g., $La_{2-x}Sr_{x}Cu_{1-y}Zn_{y}O_{4},\;La_{2-x}Ba_{x}CuO_{4},\; LaSrAlO_{4}\;and\;La_{2-x}Sr_{x}Cu_{1-y}Al_{y}O_{4}$ etc., using the IR-LPE technique. The superconducting properties of the grown films were found to vary significantly depending on the lattice mismatch with different substrates.

• Journal of the Korean Magnetics Society
• /
• v.12 no.5
• /
• pp.184-188
• /
• 2002

The Cu/Ni/Cu(002)/Si(100) films which have perpendicular magnetic anisotropy were deposited by e-beam evaporation methods. From the reflection high energy electron diffraction pattern, the films were confirmed to be grown epitaxially on silicon. After 2X lots ions/$\textrm{cm}^2$ C+ irradiation, magnetic easy-axis was changed from surface normal to in-plane as shown in the hysteresis loop of magneto-optical Kerr effects. It became manifest from analysis of X-ray reflectivity and grazing incident X-ray diffraction that even though interface between top Cu layer and Ni layer became rougher, the contrast of Cu and Ni's electron density became manifest after ion irradiation. In addition, the strain after deposition of the films was relaxed after ion irradiation. Strain relaxation related with change of magnetic properties and mechanism of intermixed layer's formation was explained by thermo-chemical driving force due to elastic and inelastic collision of ions.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1584-1586
• /
• 2002

CuIn$Se_2$ (CIS) and related compounds such as Cu($In_xGa_{1-x})Se_2$(CIGS) have been studied by their potential for use in photovoltaic devices. CIS thin film materials which have high absorption coefficient and wide bandgap, have attracted much attention as an alternative to crystalline and amorphous silicon solar cells currently in use. Cu-rich CIGS film have very low resistivity, due to coexistence of the semimetallic $Cu_{2-x}Se$. In-rich CIGS films show high resistivity, since these films are compensated films without the $Cu_{2-x}Se$ phase. Optical properties of the CIGS films also change in accordance with the resistivity for the Cu/(In+Ga) ratio. The Cu-rich films have different spectra from In-rich films in near infrared wavelengths.

• Current Photovoltaic Research
• /
• v.5 no.1
• /
• pp.20-24
• /
• 2017

Recently, three-dimensional (3D) light harvesting structures are highly attracted because of their high light harvesting capacity and charge collection efficiencies. In this study, we have fabricated $Cu_2ZnSn(S_xSe_{1-x})_4$ based 3D thin film solar cells on PR patterned Molybdenum (Mo) substrates using photolithography technique. Specifically, Mo patterns were deposited on PR patterned Mo substrates by sputtering and the thin Cu-Zn-Sn stacked layer was deposited over this Mo patterns by sputtering technique. The stacked Zn-Sn-Cu precursor thin films were sulfo-selenized to form CZTSSe pattern. Finally, CZTSSe absorbers were coated with thin CdS layer using chemical bath deposition and ZnO window layer was deposited over CZTSSe/CdS using DC sputtering technique. Fabricated 3-D solar cells were characterized by X-ray diffraction (XRD), X-ray fluorescence (XRF) analysis, Field-emission scanning electron microscopy (FE-SEM) to study their structural, compositional and morphological properties, respectively. The 3% efficiency is achieved for this kind of solar cell. Further efforts will be carried out to improve the performance of solar cell through various optimizations.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.7
• /
• pp.414-423
• /
• 2016

In the present study, the $CuN_x-Cu-CuN_x$ layer the partial pressure ratio Cu metal of Ar and $N_2$ gas using a DC magnetron sputtering device, was generated by the In-situ method. $CuN_x$ layer was able to obtain a surface reflectance reduction effect from the advantages of the process and the external light. $CuN_x$ layer is gas partial pressure, DC the Power, the deposition time variable transmittance in response to the thickness and partial pressure ratio, the reflectance was measured. $Ar:N_2$ gas ratio 10:10(sccm), DC power 0.35 A, was derived Deposition time 90 sec optimum conditions. Thus, according to the optimal thickness and the composition ratio was derived surface reflectance of 20.75%. In addition, to derive the value of ${\Delta}$ Ra surface roughness of 0.467. It was derived $CuN_x$ band-gap energy of about 2.2 eV. Thus, to ensure a thickness and process conditions can be absorbed to maximize the light in a wavelength band in the visible light region. As a result, the implementation of the $12k{\Omega}$ base line resistance of using the Cu metal. This is, 5 inch Metal mesh TSP(L/S: $4/270{\mu}m$) is in the range of the reference operation.

• Progress in Superconductivity and Cryogenics
• /
• v.20 no.3
• /
• pp.1-4
• /
• 2018

The effect of sulfate substitution on the formation of (Pb,S)-1201 type phase was investigated. Polycrystalline samples with nominal compositions of $(Pb_{0.5}B_{0.5-x}S_x)(Sr_{2-y}La_y)CuO_z$, (x = 0 - 0.5, y = 0.7 - 1.0) and $(Pb_{0.5}S_{0.5})(Sr_{2-y}La_y)CuO_z$ (y = 0.5 - 1.0) were prepared by using a solid-state reaction method. The samples were characterized by powder X-ray diffraction (XRD) and resistivity measurements. XRD data revealed that almost-single (Pb,S)-1201 phase samples could be obtained for x = 0.5 and y = 0.9-1.0, judging from the similar results of the XRD patterns between the (Pb,S)-1201 and (Pb,B)-1201 phases. Each of the samples has a crystal structure with tetragonal symmetry. The sample with x = 0.5 and y = 0.9 is found to show an onset of resistivity dropping at over 23 K and zero resistivity at 12 K.