• Bulletin of the Korean Chemical Society
• /
• v.7 no.5
• /
• pp.385-388
• /
• 1986

The reaction of cupric nitrate trihydrate with S-2-pyridyl thioates in acetonitrile was studied. The major products were the corresponding carboxylic acids and $[Cu(NO_3)(C_5H_4NS)(C_5H_5NS$)] (Complex A). Sometimes $[Cu(NO_3)(C_5H_4NS)(H_2O$)] was also obtained in addition to Complex A. When Complex A was recrystallized in dimethylsulfoxide, $[Cu(NO_3)(C_5H_4NS)(C_5H_5NS)$ {$(CH_3)_2SO$}$_2]{\cdot}2H_2O$ was crystallized. The structures of these copper complexes and the role of cupric nitrate in the hydrolysis of S-2-pyridyl thioates are discussed.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.39 no.2
• /
• pp.287-293
• /
• 2015

This research verifies stainability, super bacteria antibacterial features and antibiotic resistance of Ulmus davidiana var. japonica Nakai (UD) extract in dye cotton cloth. UD was extracted with hot water, the test cloth dyed, and then processed by mordanting treatment using $FeSO_4$ $7H_2O$, $CuSO_4$ $5H_2O$ and $Al_2(SO_4)_3$. The surface color and color fastness of the three kinds (original cloth, the cloth without mordancy and mordant cloth) were measured and the influence of dying of cotton cloth and the mordant method on the genesistasis of Methicillin-resistant Staphylococcus aureus (MRSA), antibiotic resistant bacteria. 1. The surface color of the cotton cloth for dyeing (without and with mordancy) displayed a reddish and yellowish color. Stainability was greatest when the mordant of $FeSO_4$ $7H_2O$ was used. 2. When a mordant was not used for dyeing, the color fastness to washing, perspiration and friction of the contaminated cloth was satisfactory at 4 to 5 grade in general. 3. As for the antibiotic effect to super bacteria, the growth of germ was meaningfully suppressed both on the cloth without and with mordancy compared to the comparison cloth; in addition, the dyeing method with the biggest antibacterial impact was found to be the mordancy with the mordant of $CuSO_4$ $5H_2O$ after dyeing. The results of the experiments that involved dyeing with UD extract showed that cotton cloth processed through mordancy with the mordant of $CuSO_4$ $5H_2O$ had the biggest antibiosis to super bacteria and that processed with the mordant of $FeSO_4$ $7H_2O$ had the greatest stainability.

• Journal of Conservation Science
• /
• v.29 no.1
• /
• pp.47-54
• /
• 2013

The following study tests for the effects of mordants on the production of restoration papers during the conservation process of damaged paper artifacts. For this, four different types of synthetic mordants that are being marketed currently ($K_2CO_3$, $AlK(SO_4)_2{\cdot}12H_2O$, $Cu_2SO_4{\cdot}5H_2O$, $FeSO_4$) were selected to produce samples for measuring variable properties through artificial degradation. The research conducts tests for changes in color, tensile index, and pH level (degree of acidity). The results for changes in color have shown that the value of ${\Delta}E^*ab$ of $K_2CO_3$ mordant sample was the highest, and the tests for tensile index have shown that the strength of dyeing sample was decreased in accordance with the aging time, but Changes according to the mordant was not evident. Finally, the findings for pH level have shown that samples with $Cu_2SO_4{\cdot}5H_2O$ and $FeSO_4$ have pH levels drop below 6. As a result, the research have concluded that mordants used for dyeing restoration paper were identified to have an affect in the dyeing and aging characteristics of the paper.

• Resources Recycling
• /
• v.5 no.3
• /
• pp.31-36
• /
• 1996

The metallic copper was recovered from sludge of the copper electro-plating plant by pyrometallurgical process. The reducing agent was Pyrolysized from waste tires and the flux was a mixture $Na_2CO_3$, $NaB_4O_7$, and glass. The green sludge contained 87.5% moisture and 12.5% solid with 56.5% Cu and 1.59% Fe. The sludge dried at $100^{\circ}C$ was analyized to be $Cu_4SO_4(OH)_6{\cdot}2H_2O$ and CuO by XRD analysis. The former was 84% and the latter 16%, However, the calcined sludge at $500^{\circ}C$ was 49% $Cu_2O(SO_4)$ and 51% CuO. The sludge could by smelted at $1100^{\circ}C$ for two hours with 6 to 8 moles carbon with respect to copper to produce metallic copper (>90%) with recovery of 9% above.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.3
• /
• pp.243-248
• /
• 1995

Single crystal EPR spectra of K12[As2W18O66Cu3(H2O)2]${\cdot}$11H2O exhibit an orientation-dependent fine structure of an S = 3/2 system which is accounted for by the exchange and magnetic dipole interactions among the three Cu2+ ions. The hyperfine structure and the lines from the S = 1/2 manifolds have not been observed. The isotropic exchange parameters determined from the magnetic susceptibility data at 5-300 K are J1 = J2 =-7.8 cm-1. The magnitude of J values suggests that the unpaired electrons on three Cu2+ ions interact through a sequence of six bonds involving two tungsten atoms and three oxygen atoms. The Cu-Cu distance, 4.37 $\AA$, determined from the EPR spectra is considerably smaller than the value from the X-ray crystal structure determination, 4.76 $\pm$ 0.03 $\AA$, indicating that the point-dipole model underestimates the dipolar interaction.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.3
• /
• pp.221-227
• /
• 2007

Fenton's reagent is applied to directly decompose the ion-exchange resins, IRN-78 and the mixed resin with IRN-77. The newly applied procedures is to dry the resin first and the catalyst solution is completely absorbed into the resin, then a limited dose of $H_2O_2$ is introduced for an effective reaction between the reagents within the resin. As a characteristic on the decomposition of IRN-78, the resin mixture should be heated to $40^{\circ}C$ to induce the initial reaction and lag time is also needed for about 20 minutes until the main reaction occurs. The effectiveness of the decomposition is investigated using $CuSO_4,\;Cu(NO_3)_2\;and\;FeSO_4$ as a catalyst and the decomposition rate is compared depending on the concentration of each catalyst and the amount of $H_2O_2$. The most effective catalyst was found to be $FeSO_4$ for IRN-78 alone and the mixed resin with IRN-77, and $FeSO_4$ showed a special effect that the reaction was initiated without heating and a lag time. Furthermore, the optimum concentration of the catalyst for each resin and the mixed one is suggested in the view point of the amount of $H_2O_2$ needed and the stability of the decomposition reaction.

• Korean Journal of Human Ecology
• /
• v.3 no.1
• /
• pp.51-63
• /
• 2000

The purpose of this study was to identify the best dyeing conditions using onion's outer shell. and to apply to the method in practical daily life. To do this. we extracted quercetin from onion's outer shell and dyed several natural fabrics such as cotton, slack mercerized cotton, ramie. and silk. under the different conditions. Dyed fabrics were Investigated in the aspect of dyeability and colorfastness. The effective conditions for the light-fastness and washing-fastness also have been studied. The results of the experiment were varied with such conditions as temperature. time. pH degree. and treatment and types of mordants. The results are as follows ; 1. Fabrics dyed with onion's outer shell showed excellent dyeability even though there were no mordants, and the silk fabric dyed better than both cotton and ramie fabric. Furthermore, in the cases of repeated dyeing and treatment of mordants using AIK(SO$_4$)$_2$.12$H_2O$ and CuSO$_4$,.5$H_2O$ dyeability of specimen had been improved 2. Cellulose fabrics such as cotton, mercerized cotton and ramie showed the best dyeability under relatively low temperature in the range of 20~4$0^{\circ}C$. On the contrary to cellulose fabric, silk fabric showed the best dyeability under higher dyeing temperature. All fabrics had the higest K/S value at pH 3 regardless of the kind of fiber 3. Dyeing colors varied with the kind of mordants. Colors were turned into yellow in AIK(SO$_4$)$_2$.12$H_2O$ into Yellow-red in CuSO$_4$,.5$H_2O$ , and into green-Yellow in FeSO$_4$.7$H_2O$. As mordants, AIK(SO$_4$)$_2$.12$H_2O$, CuSO$_4$,. 5$H_2O$. FeSO$_4$.7$H_2O$. gallic acid and tartaric acid were used and especially AIK(SO$_4$)$_2$.12$H_2O$ showed the best dyeability and colorfastness in repeated dyeing. Mordants such as AIK(SO$_4$)$_2$.12$H_2O$ made fabrics have better chroma and washing-fastness though the light-fastness was poorer than non mordanting. 4. Repeated dyeing brought us deep color. When fresh dyebath was used each time, the dyeability was increased as the experiment was repeated more. When dyed with used dyebath several times, improved dyeability could not be expected. The optimal using times of the used dyebath was twice.

• Journal of the Korean institute of surface engineering
• /
• v.32 no.3
• /
• pp.444-446
• /
• 1999

The structure and composition of anodic films, formed on 6063 commercial aluminium alloy at constant current density of $1.5A/^dm2$ with various superimposed cathodic current ratio, in the range 0~33%, in the 11% $H_2SO_4$ with various concentration of $CuSO_4{\cdot}5H_2O$, in the range 0~75 g/l, without cathodic current are generally porous-type and no sign of Cu co-deposition appearance, suggesting that cathodic current is an important factor in the Cu co-deposition. Comparison with the anodic film thickness measurement results obtained from anodic film formed by direct anodic current and anodic film formed by superimposed various portion of cathodic current, the portion of cathodic current of input current increases with decrease of anodic film thickness and increases with increase of concentration of $Cu_2S{\;}and{\;}Cu_2O$ in the anodic film.

• Journal of the Microelectronics and Packaging Society
• /
• v.21 no.4
• /
• pp.91-96
• /
• 2014

Through silicon via (TSV) technology is to form a via hole in a silicon chip, and to stack the chips vertically for three-dimensional (3D) electronics packaging technology. This can reduce current path, power consumption and response time. In this study, Cu-filling substrate size was changed from Si-chip to a 4" wafer to investigate the behavior of Cu filling in wafer level. The electrolyte for Cu filling consisted of $CuSO_4$ $5H_2O$, $H_2SO_4$ and small amount of additives. The anode was Pt, and cathode was changed from $0.5{\times}0.5cm^2$ to 4" wafer. As experimental results, in the case of $5{\times}5cm^2$ Si chip, suitable distance of electrodes was 4cm having 100% filling ratio. The distance of 0~0.5 cm from current supplying location showed 100% filling ratio, and distance of 4.5~5 cm showed 95%. It was confirmed good TSV filling was achieved by plating for 2.5 hrs.

• Journal of Animal Science and Technology
• /
• v.51 no.2
• /
• pp.171-176
• /
• 2009

A bacterial strain producing intracellular phytase was isolated from cultivable soil near cowsheds and identified as a fluorescent Pseudomonas sp. BUN1. The BUN1 phytase, partially purified by cation and anion exchange chromatography, exhibited its optimal activity at $40^{\circ}C$ and pH 5.5. As for substrate specificity, it was very specific for phytate and showed little activity on other phosphorylated conjugates. Its activity was greatly inhibited by metal ions such as $Cu^{2+}$, $Cd^{2+}$, and $Zn^{2+}$. Addition of corn starch to PSM (phytasesynthetic medium) [0.5% sodium phytate, 0.5% $(NH_4)_2SO_4$, 0.5% KCl, 0.01% $MgSO_4\cdot7H_2O$, 0.01% $CaCl_2\cdot2H_2O$, 0.01% NaCl, 0.001% $FeSO_4\cdot7H_2O$, 0.001% $MnSO_4\cdot4H_2O$; pH 6.5] for the phytase production significantly induced its enzyme activity in comparison with other carbon sources tested.