• Title/Summary/Keyword: $Cu^{2+}$ detection

Search Result 184, Processing Time 0.024 seconds

Synthesis and Characterization of Polymer and Polymer Complex with Some Transition Metal Ions (몇 개의 전이금속 이온과 고분자와 고분자 Complex의 합성과 특성연구)

  • Badr, S.K.;Mohamed, T.Y.
    • Journal of the Korean Chemical Society
    • /
    • v.54 no.1
    • /
    • pp.43-48
    • /
    • 2010
  • Polyamide derived from azo compound of o-amino phenol coupled with acetyl acetone, maleic anhydride acid and p-phenylene diamine were prepared. The prepared polyamide (PA) was refluxed with metal salts of transition metal ions include, $Co^{+2},\;Cr^{+2},\;Ni^{+2},\;Cu^{+2},\;Zn^{+2},\;Cd^{+2}$ and $Fe^{+3}$ in dimethyl formamide (DMF) in different molar ratios. These complexes were characterized and identified by elemental and thermal analysis, IR, 1H NMR spectra. The data showed that PA ligand coordinates with metal ions in abidentate manner through donating N=N and O-H groups. The metal ions are surrounded by coordinated water molecules and anions to establish the geometrical structure of the complexes. The thermal analysis degradation at different temperatures explained the weight loss of hydrated water and the decompositions of complexes until a constant weight loss of metal oxides is obtained.

Label-Free Rapid and Simple Detection of Exonuclease III Activity with DNA-Templated Copper Nanoclusters

  • Lee, Chunghyun;Gang, Jongback
    • Journal of Microbiology and Biotechnology
    • /
    • v.28 no.9
    • /
    • pp.1467-1472
    • /
    • 2018
  • In this study, DNA-templated copper nanoclusters (DNA-CuNCs) were used to detect exonuclease III (Exo III) activity, which is important for the diagnosis and therapy of several diseases. The results of this study showed that Exo III was affected by the concentrations of magnesium ions and sodium ions, and its optimal conditions for cleavage were $5mM\;Mg^{2+}$ and less than $25mM\;Na^+$. With a blunt-end DNA, more than 98% of DNA was digested by Exo III. As expected, with two or four cytosines in the terminal position of a 4-base overhanging DNA such as 5'-GGCC-3' and 5'-CCCC-3', there was little cleavage by Exo III compared with a blunt-end DNA.

Development of a Semiconductor Odor Gas Sensor for the Measurement of CH3SH with Taguchi Experimental Design (Taguchi 실험 계획법에 의한 CH3SH 반도체 악취 가스 센서의 개발)

  • Kim Sun-Tae;Choi Il-Hwan
    • Journal of Korean Society for Atmospheric Environment
    • /
    • v.20 no.6
    • /
    • pp.783-792
    • /
    • 2004
  • In this study, a thick-film semiconductor odor gas sensor for the detection of $CH_3$SH was developed using SnO$_2$ as the main substrate and was investigated in terms of its sensitivity and reaction time. In the process of manufacturing the sensor, Taguchi's design of experiment (DOE) was applied to analyze the effects of a variety of parameters, including the substrate, the additives and the fabrication conditions, systematically and effectively. Eight trials of experiments could be possible using the 27 orthogonal array for the seven factors and two levels of condition, which originally demands 128 trials of experiments without DOE. The additives of Sb$_2$O$_{5}$ and PdCl$_2$ with the H$_2$PtCl$_{6}$ ㆍ6$H_2O$ catalyst were appeared to be important factors to improve the sensitivity, and CuO, TiO$_2$, V$_2$O$_{5}$ and PdO were less important. In addition, TiO$_2$, V$_2$O$_{5}$ and PdO would improve the reaction time of a sensor, and CuO, Sb$_2$O$_{5}$, PdCl$_2$ and H$_2$PtCl$_{6}$ㆍ6$H_2O$ were negligible. Being evaluated simultaneously in terms of both sensitivity and reaction time, the sensor showed the higher performance with the addition of TiO$_2$ and PdO, but the opposite results with the addition of CuO, V$_2$O$_{5}$, Sb$_2$O$_{5}$ and PdCl$_2$. The amount of additives were superior in the case of 1% than 4%. H$_2$PtCl$_{6}$ㆍ6$H_2O$ would play an important role for the increase of sensor performance as a catalyst.nce as a catalyst.

Reversed-Phase Liquid Chromatographic Separation of Metal Ions by Chelate Formation with 1-(2-Pyridylazo)-2-Naphthol (역상 액체크로마토그래피에 의한 1-(2-Pyridylazo)-2-Naphthol과 킬레이트를 형성하는 금속이온의 분리)

  • Kang, Sam Woo;Park, Sun Ja
    • Journal of the Korean Chemical Society
    • /
    • v.42 no.2
    • /
    • pp.197-202
    • /
    • 1998
  • 1-(2-Pyridylazo)-2-Naphthol (PAN) has been widely used as a spectrophotometric reagent and metallochromic indicator for many metal ions. In this work, the chelate reagent of PAN was used as mobile phase additive for the separation of metal ions by reversed phase chromatography. Metal ions could be detected by monitoring the effluent at 570 nm with spectrophotometric detector. In order to investigate retention behaviors of the metal ions, the chromatograms and capacity factors were obtained as the variation of pH, ionic strength and composition of organic modifier in mobile phase. Under the obtained optimum conditions, the mixtures of Fe(III), Ni(II), Cu(II), Zn(II) and Co(II) could be separated successfully and the calibration curves under the recommended conditions showed an excellent linearity. The detection limits(S/N) were feasible at the nanogram level.

  • PDF

Rec-assay and DNA-breaking Action on the Engymatic Browning Reaction Products -Influence of Cupric Ion Concentration- (효소적(酵素的) 갈변반응(褐變反應) 생성물(生咸物)에 대(對)한 Rec-assay 및 DNA 절단(切斷) 작용(作用) -동(銅) Ion 농도(濃度)의 영향(影響)-)

  • Ham, S.S.;Park, B.K.;Lee, S.Y.;Lee, J.H.;Kang, C.K.;Lee, D.S.;Omura, Hirohisa
    • Applied Biological Chemistry
    • /
    • v.27 no.4
    • /
    • pp.264-270
    • /
    • 1984
  • In order to obtain mutagenic data of enzymatic browning reaction products, we investigated their mutagenicity. The rec-assay with Bacillus subtilis strains $H17(rec^+)$ and $M45(rec^-)$ were carried out with their spores. Detection of double strand breakage in calf-thymus DNA was investigated into sample solution with and without $Cu^{2+}$ by the agarose slab gel electrophoresis. In the rec-assay, catechol, pyrocatechol, DL-dopa, 3,4-dihydroxytoluene, hydroquinone, hydroxyhydroquinone with and without $Cu^{2+}$ in 0.05M ana 0.1M at the enzymatic browning reaction products stowed mutagenic action. And also browning solution of 0.05M hydroxyhydroquinone and catechol with $Cu^{2+}$, hydroquinone with and without $Cu^{2+}$ of 0.1M at the enzymatic browning reaction products were strong mutagenic action. The DNA breakability of the enzymatic browning reaction products of 0.1M pyrogallol was stronger than that of 0.05M pyrogallol browning solution with $Cu^{2+}$ and 3,4-dihydroxytoluene browning solution was stronger than that of 0.01M 3,4-dihydroxytoluene browning solution.

  • PDF

생쥐 초기 배아에서 Aquaporin 8과 9의 발현에 관한 연구

  • 신현상;계명찬;강수만;이성은;이지원;강한승;김문규
    • Proceedings of the Korean Society of Developmental Biology Conference
    • /
    • 2003.10a
    • /
    • pp.68-68
    • /
    • 2003
  • Aquaporin은 막관통 통로 단백질(transmembrane channel protein)로서, 삼투압의 농도구배에 따라 세포막을 가로질러 물분자를 이동시키는 기능을 하고 있다. 포유류 초기배아에서 포배강 형성은 영양외배엽세포에서 $Na^+ / K^+$ATPase에 의한 이온 농도 구배가 형성되면 auqaporin에 의해 물이 포배강으로 유입되면서 이루어진다. 본 연구에서는 생쥐 초기배아에서 반정량적인 역전사 중합효소 연쇄반응 방법(semi-quantitative RT-PCR)과 실시간 역전사 중합효소 연쇄반응 방법(real-time RT-PCR)을 통하여 AQP8과 9의 mRNA발현을 조사하고 다중 면역형광현미경 방법(confocal immunofluorescence microscopy)을 통해 단백질 발현양상을 분석하였다. AQP8 mRNA는 상실기까지 발현되지 않다가 포배기에 이르러 발현되었고 AQP9 mRNA는 수정란에서부터 발현되어 포배기에는 유의할 정도로 증가하였다. 따라서 AQP8 mRNA는 배아유전자가 활성화되어 나타나는 것이고 AQP9 mRNA는 모계유전자 기원임을 알 수 있었다. AQP8 단백질은 상실배 단계까지 발현되지 않다가 포배시기에 영양외배엽세포사이의 접합면에 발현되었고 AQP9 단백질은 상실배 시기에 할구 사이의 인접 부위에서 강하게 발현되었다가 포배시기에는 세포간의 접합면에 약하게 발현하는 경향을 나타내었다. 실시간 역전사 중합효소 연쇄반응 방법으로 조사한 결과 포배에서 물과 글리세롤을 통과시키는 AQP9는 mRNA의 발현양이 AQP8보다 약 4배 정도 많았다. 또한 포배기에 이르러서야 물만을 통과시키는 AQP8의 발현이 나타나는 것을 보아 포배강 형성시 외부에서 영양외배엽을 통해 포배강으로 유입되는 물의 이동(trans- trophectodermal water movements)에 AQP9보다 AQP8이 더 중요하게 관여할 것으로 사료된다., K, Pb, Cd, Cr, Co, Cu, Ni)을 측정하였다. 실험 조건1의 결과로서 각 국의 유아용 일회용 기저귀의 중금속 함량은 거의 유사한 경향을 나타내었으며 Cr, Zn, Pb, Ni, Mn, Mg, Li, K는 detection limit(2 ppm) 이하였고, Cd, Fe, Co, Cu, Ca, Al, Sr는 검출되었지만 기준치 이하였다. 실험 조건2의 결과로서 측정 항목(Cr, Sb, Cd, Pb, Ni, Co, Cu)중 Cr, Cd, Ni, Cu는 detection limit(0.1 ppm) 이하였고, Sb, Pb, Co는 검출되었지만 기준치 이하였다.았다. 4%의 경우에는 8$0^{\circ}C$이하로 온도를 낮추는 것이 좋은 상태를 나타내었다. 이와 같은 결과는 일반적으로 화학적 레팅을 4%, 7%에서한 선행결과와 상당히 다른 결과이다.염 농도가 증가할수록 감소 현상을 보였다.X>, 75BG30은 8.6$\mu\textrm{m}$, 75BG40은 7.02$\mu\textrm{m}$로 나타났다. 따라서 경화제 양에 관계없이 10$\mu\textrm{m}$ 이하로 나타나, 경화제 10$m\ell$만으로 미세한 크기를 얻을 수 있음을 알 수 있다. 젤리 강도 변화에 따른 차이는 300BF는 78.09$\mu\textrm{m}$ 300BG는 56.32$\mu\textrm{m}$로, 75BF나 75BG에 비하여 현저히 증가하여, 젤라틴의 젤리 강도는 캡슐 제조 조건의 주요한 변수임을 알 수 있다.추출물 투여시 혈당강하 및 혈중콜레스테롤 강하가 나타났으며, 상엽복합추출물 투여와 운동을 병행시 이러한 감소 효과가 더 뚜렷하게 나타났다.교육의 적임자로 보는 시각이 비교적 높았고 약 1/2정도는 영양교육에 참여하겠다는 의지를 가지고 있을 뿐만 아니라 실제로 영양지도를

  • PDF

형광 X선에 의한 대기 부유분진중의 미량 성분의 측정 (I): -거름종이 표준시료에 의한 부유분진중 금속성분의 형광 X선 분석-

  • 이용근;맹현재;이보경;황규자
    • Journal of Korean Society for Atmospheric Environment
    • /
    • v.5 no.2
    • /
    • pp.21-29
    • /
    • 1989
  • The metals present in atmospheric particulate come from various sources; natural or anthropogenic. Among various metals Fe, Zn, Pb, Cu, and Mn are of particular concern in as much as they are not only present in large quantity, but toxic to human body. A simple, fast, and non-destructive analytical method for these metals in atmospheric particulate was developed and the analytical details were described herein. The method involves the measurements of X-ray fluorescence of sample contained in filters and comparing it with those for standards. The standard filters were prepared by applicating premeasured standard solution to the filters and then drying. The accuracy of the method was tested by analyzing standard reference materials and by independently analyzing samples using a different, previously accuracy-proven method, inductively coupled plasma atomic emission spectrometry, and comparing the results obtained. Analytical sensitivities and detection limits of the present method were 62.9, 178.2, 82.9, 146.1, 37.2, 120.3 cps/$\mug/cm^2$ and 39.0 35.6, 137.5, 125.9, 182.6, 72.8 $ng/cm^2$ for Fe, Zn, Pb, Cu, Mn, and Ni respectively. The method was applied to Seoul atmospheric particulate and some results were reported.

  • PDF

A Study on the Trace Analysis of Germanium in Inorganic Matrices by Differential Pulse Polarography (Differential Pulse Polarography에 의한 무기물 시료 중 Germanium의 미량 분석에 관한 연구)

  • Shin, Ho-Sang;Oh, Yun-Suk;Shin, Hak-Soo
    • Analytical Science and Technology
    • /
    • v.9 no.3
    • /
    • pp.253-261
    • /
    • 1996
  • Analytical method for the determination of trace germanium in inorganic matrices by differential pulse polarography(DPP) was studied. The reduction peak of germanium(IV) in perchloric acid solution containing 1, 2, 3-trihydroxy benzene appeared at -0.45V(vs. Ag/AgCl) and the peak current for germanium complex varied linearly with concentration variation. Factors affecting sensitivity and precision for germanium quantification were studied and detection limit under the investigated parameters was 1ng/ml. Inorganic samples were decomposed by fusion with potassium pyrosulfate. Serious interferences of Se(IV), Pb(II), As(III) for the determination of germanium were discussed. Interferences of these elements could be avoided by extraction of germanium from decomposed matrices by $CCl_4$ in 10M HCl solution. The germanium contents of inorganic samples(Pb bf. dust, Cu bf. dust, gneiss, Cu anode slime) were determined by the above method.

  • PDF

Determination of Cadmium(II) and Copper(II) by Flame Atomic Absorption Spectrometry after Preconcentration on Column with Pulverized Amberlite XAD-4 with Bismuthiol I

  • Park, Dong-Seok;Choi, Hee-Seon
    • Bulletin of the Korean Chemical Society
    • /
    • v.28 no.8
    • /
    • pp.1375-1382
    • /
    • 2007
  • A column preconcentration method with pulverized Amberlite XAD-4 loaded with bismuthiol I (BI) has been developed for the determination of trace Cd(II) and Cu(II) in various real samples by flame atomic absorption spectrophotometry. Various experimental conditions, such as the size of XAD-4, adsorption flow rate, amount of bismuthiol I, stirring time for adsorbing bismuthiol I on XAD-4, pH of sample solution, amount of XAD-4- BI, desorption solvent, and desorption flow rate, were optimized. Also, the adsorption capacity and the adsorption rate of Cd(II) and Cu(II) on XAD-4-BI were investigated. The interfering effects of various concomitant ions were investigated, Bi(III), Sn(II) and Fe(III) were found to affect the determination. But the interference by these ions was completely eliminated by adjusting the amount of XAD-4-BI resin to 0.70 g, although the adsorption flow rate was slower. For Cd(II) our proposed technique obtained a dynamic range of 0.5-40 ng mL-1, a correlation coefficient (R2) of 0.9913, and a detection limit of 0.3 ng mL-1. For Cu(II), the corresponding values were 2.0-120 ng mL-1, 0.9921 and 1.02 ng mL-1. To validate this proposed technique, the aqueous samples (stream water, reservoir water, tap water and wastewater), the diluted brass sample and the plastic sample, as real samples, were used. Recovery yields of 91-103% were obtained. These measured data were not different from ICP-MS data at 95% confidence level. Our proposed method was also validated using rice flour CRM (normal, fortified) samples. From the results of our experiment, we found that the technique we present here can be applied to the determination of Cd(II) and Cu(II) in various real samples.

Single Magnetic Bead Detection in a Microfluidic Chip Using Planar Hall Effect Sensor

  • Kim, Hyuntai;Reddy, Venu;Kim, Kun Woo;Jeong, Ilgyo;Hu, Xing Hao;Kim, CheolGi
    • Journal of Magnetics
    • /
    • v.19 no.1
    • /
    • pp.10-14
    • /
    • 2014
  • In this study, we fabricate an integrated microfluidic chip with a planar Hall effect (PHE) sensor for single magnetic bead detection. The PHE sensor was constructed with a junction size of $10{\mu}m{\times}10{\mu}m$ using a trilayer structure of Ta(3 nm)/NiFe(10 nm)/Cu(1.2 nm)/IrMn(10 nm)/Ta(3 nm). The sensitivity of the PHE sensor was 19.86 ${\mu}V/Oe$. A diameter of 8.18 ${\mu}m$ magnetic beads was used, of which the saturation magnetization was ~2.1 emu/g. The magnetic susceptibility ${\chi}$ of these magnetic beads was calculated to be ~0.14. The diluted magnetic beads solution was introduced to the microfluidic channel attributing a single bead flow and simultaneously the PHE sensor voltage was measured to be 0.35 ${\mu}V$. The integrated microchip was able to detect a magnetic moment of $1.98{\times}10^{-10}$ emu.