• Journal of Sensor Science and Technology
• /
• v.13 no.6
• /
• pp.424-429
• /
• 2004

$Cr_{2}O_{3}$ thick films were fabricated by screen printing method on alumina substrates and annealed at $700^{\circ}C$, $800^{\circ}C$, and $900^{\circ}C$ in air, respectively. Structural properties examined by XRD and SEM showed (116) dominant $Cr_{2}O_{3}$ peak and increased grain sizes with the annealing. The resistance of the films decreased with increasing the annealing temperature. Gas sensing characteristics to $NH_{3}$, CO, $C_{4}H_{10}$, and NO gases showed sensitivity only to $NH_{3}$ gas. $Cr_{2}O_{3}$ thick films annealed at $700^{\circ}C$ had the sensitivity of about 15 % for 100 ppm $NH_{3}$ gas at the working temperature of $300^{\circ}C$. The thick films had good selectivity to the $NH_{3}$ gas. The response time to $NH_{3}$ gas was about 10 seconds.

• Korean Journal of Materials Research
• /
• v.13 no.7
• /
• pp.420-423
• /
• 2003

Coatings of TiCrN ion-plated on a steel substrate was oxidized at $800^{\circ}C$ in air, and their oxidation mechanism was presented. During oxidation, substrate elements and Ti and Cr in the coating always diffused outwardly to form the oxide scale. Simultaneously, oxygen from the atmosphere diffused inward1y to react with Ti and Cr to form $TiO_2$and $Cr_2$$O_3$, respectively. Also, the counter-diffusion of cations and oxygen resulted in some oxygen dissolution in the unoxidized TiCrN coating, and Fe dissolution in the oxide scale. When the Ti content in the coating was high, the $TiO_2$-forming tendency was strong, while when the Cr content was high, the $Cr_2$$O_3$-forming tendency was strong.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.6
• /
• pp.3102-3107
• /
• 2013

Inorganic pigments were prepared from $Al_2O_3$, CoO, $Cr_2O_3$, ZnO, $SrO_2$ and Kaolin. The pigment was prepared through the processes of mixing and crushing of the raw materials, sintering, milling and drying. The color of the pigments was changed from blue to green as $Cr_2O_3$ contents in the pigment increased. The color became brighter irrespective of the pigment composition as pigment particle size became smaller. Maximum sintering temperature was the most suitable at around $1,250^{\circ}C$. In the test of compatability between the pigment and glaze, the color became close to green as $Cr_2O_3$ contents in the pigment increased, and became close to blue as CoO contents increased.

• Journal of Magnetics
• /
• v.8 no.4
• /
• pp.142-145
• /
• 2003

Valence states and electronic structures of Cr-doped $Nd_{1/2}A_{1/2}Mn_{1-y}Cr_{y}O_3$(NAMO; A=Ca, Sr) manganites have been investigated using x-ray absorption spectroscopy (XAS) and high-resolution photoemission spectroscopy (PES). All the Cr-doped NAMO systems exhibit the clear metallic Fermi edges in the Mn $e_{g}$ PES spectra near $E_{F}$. The spectral intensity at $E_{F}$ is higher for Cr-doped N $d_{l}$ 2/S $r_{l}$ 2/Mn $O_3$(NSMO) than for Cr-doped N $d_{l}$ 2/C $a_{l}$ 2/Mn $O_3$ (NCMO), reflecting the stronger metallic nature for NSMO than for NCMO. The measured Cr 2p XAS spectra are found to be very similar to that of C $r_2$ $O_3$, indicating that Cr ions in Cr-doped NAMO are in the trivalent C states ( $t^3$$_{2g}$). The Cr 2p XAS data are consistent with the Cr 3d PES spectra located at ∼1.3 eV below $E_{F}$ and having no emission near $E_{F}$.

• Korean Journal of Materials Research
• /
• v.14 no.2
• /
• pp.110-114
• /
• 2004

High velocity oxy-fuel sprayed NiCoCrAlY coatings were oxidized between 1000 and $1200^{\circ}C$ in air, and the oxide scales were examined by XRD, SEM/EDS, and EPMA. The unoxidized coatings consisted mainly of ${\gamma}$'$-Ni_3$Al, with some ${\gamma}$-Ni. The major oxide formed on the coatings was $\alpha$ $-Al_2$$O_3$. Additionally, (CoCr$_2$$O_4$, $CoAl_2$$O_4$) spinels and $Al_{5}$ $Y_3$$O_{12}$ coexisted. NiO was not found, despite of high amount of Ni in the coating. Below the oxide layer, internally formed $Al_2$$O_3$ existed.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1999.05a
• /
• pp.260-260
• /
• 1999

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.947-950
• /
• 2004

[ $ZnCr_2O_4$ ]에 $Li_2CO_3$를 $5{\sim}30wt%$ 범위에서 정량적으로 첨가한 감습재료에서 screen printing법으로 알루미나 기판 위에 후막으로 인쇄하고 $650\sim750^{\circ}C$에서 소결하여 후막 습도센서를 제작하였으며, $30\sim90%RH$ 범위에서 상대습도에 따른 저항 및 정전용량 특성을 조사하였다. $ZnCr_2O_4$에 $Li_2CO_3$가 5wt%가 첨가된 조성의 센서는 70%RH이상에서, 25wt%이상 첨가된 조성의 센서는 40%RH이하에서 저항 및 정전용량이 급격히 변화하는 switching 현상을 나타내었다. 반면, $ZnCr_2O_4$에 $Li_2CO_3$가 15wt%가 첨가된 조성의 센서는 선형적으로 저항은 감소하였고, 정전용량은 증가하였다.

• Korean Journal of Metals and Materials
• /
• v.50 no.5
• /
• pp.361-368
• /
• 2012

Fe-(10, 20, 30, 40) wt%Cr alloys were corroded in $Na_2SO_4$ salts ($m.p.=884^{\circ}C$) at $800{\sim}900^{\circ}C$ for 3-300 hrs. Their corrosion resistance increased with an increase in Cr content owing to the formation of slowly growing $Cr_2O_3$. During corrosion, $Na_2SO_4$ dissociated and reacted with the alloys to form $Cr_2O_3$ and $Fe_2O_3$. Since $Fe_2O_3$ dissolved fast into the salts, most of the scales consisted primarily of $Cr_2O_3$. Inside the scale, a small amount of sulfides also existed. The oxidation, dissolution and detachment of the formed scales occurred significantly.

• Journal of the Korean Ceramic Society
• /
• v.45 no.8
• /
• pp.453-458
• /
• 2008

New inorganic red pigments based on Cr-doped $Y_2O_3$ and $Al_2O_3$ were synthesized by solid state method and characterization of their pigments were characterized by using XRD, FT-IR, SEM and UV-Vis spectrophotometer. The single perovskite phase revealed at $1450^{\circ}C{\sim}1550^{\circ}C$ for 6 h due to using mineralizers. The color of pigment powders resulted out various red-shades depending on the compositions of used materials and temperatures. Glazed tiles painted with pigment powders showed red color in oxidation and reduction firing. The best red colour was obtained when the $Cr_2O_3$ was used 0.04 mole at $1450^{\circ}C$ for 6 h.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.136.2-136.2
• /
• 2010

고전도성 세라믹 연결재용 $La_{0.8}Sr_{0.2}Cr_{1-x}Ti_xO_3$ (X=0.1 and 0.2) 연결재 재료의 소결도와 전기전도도에 대해서 연구하였다. 이러한 목적으로 $LaCrO_3$, $La_{0.8}Sr_{0.2}Cr_{0.8}Ti_{0.2}O_3$ (LSCT82), $La_{0.8}Sr_{0.2}Cr_{0.9}Ti_{0.1}O_3$ (LSCT91) 분말들을 공침법을 통해 합성하였으며, 결정구조는 X-ray Diffraction(XRD)를 통해 확인하였다. 소결 특성은 주사 전자현미경을 통해 분석하였고 전기 전도도는 직렬 4-단자 법으로 측정하였다. 상대 밀도 분석으로부터 도핑된 $LaCrO_3$는 $LaCrO_3$보다 더 높은 소결성을 나타내었고, 입자 크기가 작을수록 소결성이 향상하는 것을 확인 할 수 있었다. 다양한 소결온도에서 얻은 LSC, LSTC 시편들의 XRD 결과는 LSC와 LSTC의 소결성이 2차상의 상전이와 밀접한 관련이 있다는 사실을 나타내었다. 다시 말해, LSTC는 $1300^{\circ}$이상 LSC는 $1400^{\circ}C$ 이상에서 2차상이 융해됨으로써 소결성을 현저하게 향상시킨다는 것을 알 수 있었다. 그리고 비슷한 상대밀도를 가진 LSC와 LSTC의 전기 전도도를 비교 측정한 결과, LSTC가 LSC보다 더 높은 전기 전도도를 나타낸다는 것을 알 수 있었다.