• Title/Summary/Keyword: $Cr^{+6}$

Search Result 2,947, Processing Time 0.027 seconds

The Prediction of Fatigue Damage for Pressure Vessel Materials using Shear Horizontal Ultrasonic Wave (SH(shear horizontal) 초음파를 이용한 압력용기용 재료의 피로손상 예측)

  • Kang, Yong-Ho;Chung, Yong-Keun;Song, Jung-Il
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.26 no.6
    • /
    • pp.90-96
    • /
    • 2009
  • Ultrasonic method using SH(shear horizontal) wave has been developed to determine the surface damage in fatigued material. Fatigue damages based on propagation energy were analyzed by multi-regression analysis in interrupted fatigue test specimen including CrMoV and 12Cr alloy steel. From the test results, as the fatigue damage increased the propagation time of the launched waves increased and amplitude of wavelet decreased. Also, analysis for the waveform modulation showed a reliable estimation, with confidence limit of 97% for 12Cr steel and 95% for CrMoV steel, respectively. Therefore, It is thought that SH ultrasonic wave technique can be applied to determine fatigue damage of in-service component nondestructively.

The Anodicc PolarizationBehavior of Fe-Cr-Ni-W alloy in 1N HCI Solution (1N 염산 용액에서 Fe-Cr-Ni-W 합금의 양분극 거동에 관한 연구)

  • 윤재돈;강성군
    • Journal of the Korean institute of surface engineering
    • /
    • v.21 no.4
    • /
    • pp.176-182
    • /
    • 1988
  • Effects of Cr, Ni and W on the anodic polarization behavior were investigated for Fe-Cr-Ni-W alloys in deaerated 1N HCI solution. Surface films formed on the polarization were analysed using AES, SEM and EDAX. A higerconcentration of tungten was found in the surface oxide film compared to the matrix. It played an importanet role on incresing the stability of the passive film. The presence of an adequate amount of Cr was essential to increase the pitting resistance of the alloys in acid chloride media. Under 12 wt%cr,alloys containing 6wt%W did not exhidit any passivity at all. The main role of Ni was to control the microstructure rather than to modify the corrosion resistance. In 23 cr-14Ni-^W alloy, the duplex microstructure of ferrite($\delta$-phase) in an austenic matrix was developed. The reson why proferred pitting appeared in austenite and ferrite/austenite interface was that ferrite had more amount of Cr and W than austenite.

  • PDF

Reduction of Chromium (Ⅵ) and Carcinogenesis (6가 크롬의 환원과 발암)

  • 박형숙
    • Environmental Analysis Health and Toxicology
    • /
    • v.18 no.3
    • /
    • pp.165-174
    • /
    • 2003
  • Cr (Ⅵ) - containing compounds are well-established carcinogens, although the mechanism for chromium - induced carcinogenesis is still not well understood. The reduction of Cr (Ⅵ) to its lower oxidation states, par ticularly Cr (V) and Cr (IV), is an important step for the production of chromium-mediated reactive oxygen species (ROS). The persistent oxidative stress during the reduction process may play a key role in the mechanism of Cr (Ⅵ) -induced carcinogenesis. This paper summarizes recent studies on (1) the reduction of Cr (Ⅵ) to Cr (III) occur by a multiplicity of mechanisms depending on the nature of reducing agents including ascorbate, diol-and thiol-containing molecules, certain flavoenzymes, cell organelles, intact cells, and whole animals; (2) free-radical production with emphasis on hydroxy radical generation via Fenton or Haber-Weiss type reactions; and (3) free radical - induced cellular damage, such at DNA strand breaks, hydroxylation of 2'-deoxyguanosine, and activation of nuclear transcription factor kB.

Improvement of characteristics and dependence on underlayer substrate temperature of CoCrTa/Ti double layer (CoCrTa/Ti 이층막의 하지층기판온도의존성 및 특성개선)

  • 김용진;성하윤;금민종;손인환;김경환
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2000.11a
    • /
    • pp.492-495
    • /
    • 2000
  • In order to develop an ultra-thin CoCr perpendicular magnetic recording layer, we prepared CoCrTa/Ti double layer for perpendicular magnetic recording media by new facing targets sputtering system, Crystallgraphics and magnetic characteristics of CoCrTa on underlayer substrate temperature have been investigated. Crystallgraphic and magnetic characteristic of thin films were evaluated by X-ray diffractometry(XRD), vibrating sample magnetometer(VSM) and atomic force microscopy(AFM). The coercivity and anisotropy field was increased by increasing under layer substrate temperature, c-axis orientation of CoCrTa magnetic recording layer was improved 8$^{\circ}$ to 5.6$^{\circ}$when under layer substrate temperature was 250[$^{\circ}C$]. Also, through annealing effect for CoCrTa/Ti double layer, it was certain that crystallgraphics and magnetic characteristics was improved.

  • PDF

Bioaccumulation of Chromium and Manganese in the Earthworm Eisenia andrei (Annelida; Oligochaeta) in Relation to the Supply of Organic Sludges (유기성 슬러지 급이에 따른 크롬과 망간의 줄지렁이 (Eisenia andrei (Annelida; Oligochaeta)) 체내 생물축적)

  • Bae, Yoon-Hwan;Choi, Suk Soon
    • Journal of the Korea Organic Resources Recycling Association
    • /
    • v.24 no.3
    • /
    • pp.101-108
    • /
    • 2016
  • Concentrations of Chromium(Cr) and Manganese(Mn) in several kinds of dewatered organic sewage sludges generated from wastewater treatment plants of Pocheon City, Gyeongii Province were examined. In addition, bioaccumulations of Cr and Mn in the body of earthworm Eisenia fetida were also investigated by changing of feed sludge amounts. Cr and Mn concentrations in sludges were in the range of 0.0~0.3 mg/kg and 3.6~17.6 mg/kg, respectively, which would not cause acute toxicities to earthworm population. Cr was bioaccumulated in the earthworm body but bioaccumulation was not proportional to the amount of sludges supplied. The degree of bioaccumulation of Cr decreased in later phase as the supplied amounts of sludges increased. Meanwhile, there were rare bioaccumulation with regard to Mn. In this study, the value ranges of bioaccumulation factor (BAF) for Mn were 0.00~0.12 when 60g of sludges was supplied. In the case of Cr, the value of BAF was 19.33 when 60g of human manure sludge was provided.

Expression of the TaCR1 Gene Induced by Hessian Fly Larval Infestation in Wheat Carrying a H21 Gene.

  • Jang, Cheol-Seong;Seo, Yong-Weon
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.49 no.2
    • /
    • pp.148-153
    • /
    • 2004
  • The Hessian fly, Mayetiola destructor (Say), is known to be one of the major insect herbivores of wheat worldwide. In order to provide molecular events on interactions of the NIL with H21 and larvae of Hessian fly biotype L, the TaCR1 gene, Triticum aestivum cytokinin repressed 1, was isolated through the suppression subtractive hybridization, which was constructed using stems of the NIL with H21 at 6 days after infestation as tester and stems of the recurrent parent Coker797 without H21 at 6 days after infestation as driver. Transcript levels of TaCR1 mRNA in the NIL with H21 were highest at 6 days after infestation but in the Coker797 without H21 until 8 days were similar with those of non-infested plants. Expression of the TaCR1 gene was decreased at early time and then recovered after wounding or $H_2O$$_2$ treatment as well as 6-BAP treatment. Transcripts levels of the TaCR1 gene was changed after MeJA, SA, ethephone, or ABA treatment. In drought treatment, the TaCRl gene were increased at early stage of stress and then decreased at late stage. Expression of the TaCRl gene was continued to decrease through 24 h in the cold treatment. Although the TaCRl gene is increased through infestation in NIL with H21, further study was required to elucidate a role on resistance against larvae of Hessian fly. However, the TaCR1 gene could be used as marker gene on response of plants against abiotic stresses as well as application of plants with several hormones.

Prediction of Cr Content in the Martensitic-hardfaced Weldment Utilizing Dilution Rate Analytically Estimated (마르텐사이트계 경화 육성용접부의 희석율 해석을 통한 Cr함량 예측에 대한 연구)

  • Kim, Bong-Hun;Kim, Chun-Hwan
    • Journal of Welding and Joining
    • /
    • v.32 no.6
    • /
    • pp.14-21
    • /
    • 2014
  • High-temperature corrosion resistance of martensitic-hardfaced weldment is generally evaluated by the Cr content depending on dilution rate. Present study used a commercial program(SYSWELD) applying three-dimensional heat flow analysis to predict temperature distribution of weld. Configuration of weld bead can be determined by the contour of melting temperature and simultaneously dilution rate is calculated to predict Cr content. Experimental study also has been conducted to measure Cr content of harfaced surface welded by FCAW. Results indicated that computational results were well matched with those obtained from experiments.

CrN and TiN Coatings for the Wear Resistance of Extrusion Mold for Magnesium (마그네슘 압출용 금형의 내마모성 향상을 위한 CrN, TiN 코팅)

  • Lee, Su-Young;Kim, Sang-Ho
    • Journal of the Korean institute of surface engineering
    • /
    • v.44 no.6
    • /
    • pp.233-238
    • /
    • 2011
  • The friction and wear characteristics of CrN and TiN coatings on SKD61 which is mold material using for extrusion of AZ80 magnesium alloy were investigated. The coatings were deposited by the arc ion-plating method, and the thickness were about $3.59{\mu}m$ and $3.28{\mu}m$, respectively. Reciprocating friction wear tests were conducted by varying pin load and temperature of counter substrate at un-lubricated condition. The pin loads were 11, 15 and 19 kgf, and the substrate temperatures were room temperature and $120^{\circ}C$. CrN coating which has a lower friction coefficient and a smaller adhesive wear with AZ80 magnesium alloy showed better wear resistance than TiN coating.

In Vitro Culture and Cryopreservation of Bovine Embryos Derived from Matured and Fertilized In Vitro (소 체외수정란의 실용화를 위한 체외배양과 동결보존에 관한 연구)

  • 양부근;정희태;김정익
    • Journal of Embryo Transfer
    • /
    • v.10 no.1
    • /
    • pp.53-63
    • /
    • 1995
  • The effects of different protein sources (serum vs bovine serum albumin), growth factors (EGF and PDGF) and co-culture with various type of somatic cel1s (BOEC, MEF and BRL) on the in vitro development of in vitro matured / in vitro fertilized bovine oocytes were examined, and the viability of frozen/thawed embryos derived from IVM /IVF was examined. Cell numbers of blastocysts were also counted. In Experiment 1, CR$_1$aa with serum was superior to CR$_1$aa with BSA in producing morulae plus blastocysts from IVM /IVF oocytes(24.4% vs 30.4%, p>0.05). In Experiment 2, more morulae plus blastocysts(42.3%) were produced in CR$_1$aa containing long /ml EGF than in the control CR$_1$aa(33.3%). In Experiment 3, 2- to 8-cell embryos derived from IVM /IVF oocytes were randomly allotted to one of 4 culture groups : a) CR$_1$aa ; b) CR$_1$aa + ing /ml PDGF ; CR$_1$aa + Sng /ml PDGF ; CR$_1$aa + lOng /ml PDGF ; culture resulted in 21.3, 51.2, 41.4 and 45.9%(p<0.05), respectively, developing into morulae and blastocysts. In Experiment 4, 0 and Sng /ml PDGF added to CR$_1$aa coculture with BRL or BOEC yielded 47.5, 42.5, 33.8 and 41.6% morulae and blastocysts, respectively. In Experiment 5, the proportion of embryos into morulae and blastocysts was highest in CR$_1$aa with MEF coculture group(50.9%) compared to any other group(CR$_1$aa, 22.3%; CR$_1$aa+BRL, 32.9%; CR$_1$aa+BOEC, 33.8%, p>0.05). In Experiment 6, survival rate of blastocysts produced by in vitro fertilization when cryoprotectant was removed in 0.7M glycerol+0.7M sucrose and 0.7M sucrose solution for 10 min. after thawing at 2$0^{\circ}C$ (Exp. H, 58.8%) was slightly higher than when cryoprotectant was removed 10%, 6.7% and 3.3% glycerol for 10 min. after thawing at 37$^{\circ}C$ (Exp. I, 54.3%). These study indicate that growth factors and somatic cell co-culture can increase the proportion of embryos that develop into morulae and blastocysts without an increase in the cell number and frozen /thawed method employed this experiment was not different.

  • PDF

Feeding of Juvenile Purple Washington Clam, Saxidomus purpuratus (Sowerby): Effects of Algal Concentration and Temperature

  • Lee, Chang-Hoon;Choi, Yong-Suk;Bang, Jong-Deuk;Jo, Soo-Gun
    • Journal of Aquaculture
    • /
    • v.15 no.4
    • /
    • pp.253-260
    • /
    • 2002
  • To find the optimal rearing conditions for Saxidomus purpuratus juvenile, filtering activity was estimated as functions of algal concentration and temperature by measuring the rates of clearance (CR) and ingestion (IR), when S. purpuratus was feeding. The clams were fed on unialgal diet of Isochrysis galbana at 6 algal concentrations (4.6$\times$$10^4$~2.6$\times$$10^6$ cells/ml) and at 6 temperatures (5, 10, 15, 20, 25, and 30^{\circ}C ). Algal concentration significantly affected the CR and the IR at all temperatures. At lower algal concentrations, CR increased, but decreased beyond a particular concentration. The maximum CR ($CR_{max}$) at 5, 10, 15, 20, 25, and 30^{\circ}C were 0.30, 1.73, 5.95, 15.17, 21.12, and 0.33 $l/g/h$, respectively. Below the level of 5.6$\times$10$^{5}$ cells/ml, IR increased as algal concentration increased, but was saturated at higher concentrations. To maintain high growth rate of S. purpuratus, I. galbana should be supplied with more than 5.6$\times$10$^{5}$ cells/ml. The maximum IR ($IR_{max}$) at 5, 10, 15, 20, 25 and30^{\circ}C were $2.2$\times$10^8, $1.5\times$10^9, 3.4$\times$10^9, 4.9$\times$10^9, 5.3$\times$10^9, and 1.0$\times$10^8$ cells/g/h, respectively. As for temperature, both $CR_max$ and $IR_max$ increased remarkably with raising temperature from 5 to 25^{\circ}C, but rapidly decreased at 30^{\circ}C. Between 15 and 25^{\circ}C $CR_{max} and IR_{max}$ were higher and most stable, At this temperature range, the $Q_{10}/s for CR_{max} and IR_{max}$ were 3.5 and 1.6, respectively. Therefore the optimal thermal range for the juvenile is 15~$25^{\circ}C$. The annual variation in IR$_{max}$ predicted by natural seawater temperature shows that inactive period (with lower $IR_max$) lasts for 5 months (from December to April). To ensure higher growth of juvenile during this inactive period at hatcheries, rearing temperature should be elevated to $15^{\circ}C$.>.