• Korean Journal of Food Science and Technology
• /
• v.51 no.4
• /
• pp.404-409
• /
• 2019

This study was performed to determine the optimum conditions for the production of gaseous chlorine dioxide ($ClO_2$) from aqueous $ClO_2$ (HCl+$NaClO_2$). When 1 N HCl was reacted with various concentrations of $NaClO_2$ (50,000-500,000 mg/mL), the highest concentration (695 mg/L) of gaseous $ClO_2$ was obtained from the aqueous $ClO_2$ containing $100,000{\mu}g/mL$ $NaClO_2$. Next, the effects of relative humidity (RH; 43, 85, and 100%) and temperature (4, 12, and $25^{\circ}C$) on the production of gaseous $ClO_2$ were investigated. It was observed that the concentration of gaseous $ClO_2$ was increased as RH was decreased, or the temperature was increased. Finally, it was confirmed that the amount of gaseous $ClO_2$ was highly correlated ($R^2=0.9546-0.9992$) with the volume of aqueous $ClO_2$. The results of this study provide useful information for designing a sanitization program using gaseous $ClO_2$ under various environmental conditions.

• Journal of Adhesion and Interface
• /
• v.18 no.2
• /
• pp.53-58
• /
• 2017

In this study, to overcome a complicated shoe adhesion process such as buffing, pre-treatment by primer in the rubber component of the shoe, we studied adhesion and mechanical properties with rubber compound added $MgCl_2$. We determined adhesion properties of $MgCl_2$ content. Especially, the rubber containing $MgCl_2$ exhibited good adhesion properties to water-based adhesion. Since $MgCl_2$ is a water-soluble salt, it was judged that this phenomenon occurred. The results are confirmed by contact angle and surface morphology measurement. In addition, in the case of rubber compound added $MgCl_2$, the crosslinking efficiency was increased and the NBS resistance was increased.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.161-161
• /
• 2012

질화티타늄(Titanium Nitride, TiN)은 화학적 안정성이 우수하고, N/Ti 원소 비율에 따라 열전도성 및 전기전도성이 변화하는 특성을 가지고 있어서 Metal Insulator Silicon (MIS) 나 Metal Insulator Metal (MIM) capacitor의 metal electrode 물질로 적용되고 있다. $TiCl_4$와 $NH_3$ gas를 이용하여 $500^{\circ}C$ 이상의 고온 조건에서 Chemical Vapor Deposition (CVD) 법으로 TiN 박막을 증착하는 방식이 가장 널리 사용되고 있으나, TiN 박막 내의 Chlorine (Cl) 원소가 SiO2 두께와 누설전류 밀도를 증가시키는 요인으로 작용하므로 Cl의 거동 및 함량 제어를 통한 전기적인 특성의 향상 평가가 요구되고 있다[1-3]. 본 실험에서는 $SiO_2$ 위에 TiN을 적층 한 구조에서 magnetic sector type의 Secondary Ion Mass Spectrometry (SIMS)를 이용하여 Cl 원소의 검출도 개선 방법을 연구하였다. 일반적인 $Cs^+$ 이온을 이용하여 $Cl^-$ 이온을 검출할 경우에는 TiN 하부에 $SiO_2$가 존재함에 따른 charging effect와 mass interference가 발생되는 문제점이 관찰되었다. 이를 개선하기 위해 Cl과 Cs 원소가 결합된 $ClCs^+$ cluster ion을 검출하는 방법을 시도하였으나, Cl- 이온 검출 방식에 비해 오히려 낮은 검출도를 나타내었으나 Cl 원소가 속하는 halogen 족 원소의 높은 전자 친화도 특성을 이용한 $ClCs_2^+$ cluster ion을 검출하는 방법[4]을 적용한 경우에는 $ClCs^+$ 방식에 비해 검출도가 3order 개선되는 결과를 확보하였으며, 이 결과를 토대로 Cl dose ($atoms/cm^2$) 와 Rs (ohm/sq) 간의 상관 관계에 대해 고찰하고자 한다.

• Journal of the Korean institute of surface engineering
• /
• v.46 no.2
• /
• pp.87-92
• /
• 2013

Viscosities of $LaCl_3$-CsCl binary melts were measured by the capillary method over the range of their liquidus temperatures to about 1200 K. The cell constant were determined by using pure water. The results obtained are summerized as follows: Viscosities of melted $LaCl_3$ were decreased with the content of CsCl for all over the composition range of binary melts. Composition versus viscosity relation for the binary melt showed a non-linear relationship from the additivity line and the deviations showed a maximum value at about 60 mol% CsCl. This suggest the existence of the complex ion of $LaCl_4{^-}$ in the melt. Activation energy for the viscous flow of the binary melts decreased monotonously with the increasing content of CsCl after a few increasement till 40 mol% CsCl. All of these results were the resemble with the viscosities of $LaCl_3$-NaCl binary melts.

• Journal of Life Science
• /
• v.30 no.4
• /
• pp.321-330
• /
• 2020

The aim of this study was to investigate the effect of copper (II) chloride (CuCl₂) on zebrafish. Zebrafish were exposed to various CuCl₂ concentrations and subjected to different exposure times to determine the median lethal concentration (LC₅₀) values. To evaluate stress responses, we measured whole-body cortisol levels and behavioral parameters using the open field test (OFT) or the novel tank test (NTT). The zebrafish were exposed to CuCl₂ solution at concentrations of 1.5-150 ㎍/l or a vehicle for 1 hr before behavioral tests or sample collection for whole-body cortisol. The LC₅₀ values were 30.3, 25.3, and 14.8 ㎍/l at 24, 48, and 96 hr, respectively. The NTT showed that mobility, velocity, and distance covered were significantly lower in zebrafish exposed to CuCl₂ than in the control group (p<0.05), while the turn angle was significantly higher in zebrafish exposed to a CuCl₂ concentration of 150 ㎍/l than in the control group (p<0.05). The OFT also showed that mobility, velocity, and distance covered were significantly lower and the turn angle and meandering were significantly higher in zebrafish exposed to all concentrations of CuCl₂ than in the control group (p<0.05). The whole-body cortisol levels were significantly higher in zebrafish exposed to CuCl₂ than in the control group (p<0.05). These results suggest that exposure to lethal CuCl₂ concentrations induces an intense toxic and stress response in zebrafish, causing behavioral changes and increasing whole-body cortisol levels.

• Journal of Aquaculture
• /
• v.16 no.2
• /
• pp.118-123
• /
• 2003

This study was conducted to investigate the disinfection effects of chlorine dioxide ($ClO_2$) on 4 fish pathogenic bacteria (Vibrio anguillarum, Edwardsiella tarda, Streptococcus sp. and Staphylococcus sp.) isolated from infected olive flounders. The bacteria were exposed to different concentrations of ClO$_2$ (0.129, 0.246 and 0.455 ppm) and response times (0.5, 1, 3, 5 and 10 min), and then were incubated for 12 hr. The effective disinfection concentrations of $ClO_2$ against experimental bacteria by $ClO_2$ for 0.5 min were observed with 0.455 ppm for Staphylococcus sp., 0.246 ppm for V. anguillarum and E. tarda, and 0.129 ppm for Streptococcus sp., respectively. The duration of exposure at low concentration of $ClO_2$ increased for the disinfectant ability to experimental bacteria.

• Journal of the Korean Chemical Society
• /
• v.38 no.2
• /
• pp.101-107
• /
• 1994

Some molybdenum(III) and (IV) complexes have been prepared from the reaction of $MoCl_4$·2MeCN with N, P, O-donating ligands and characterized by elemental analysis, infrared and UV-Visible spectroscopy. 3,5-Lutidine, 1,2-phenylenediamine, 8-hydroxyquinoline, 9,10-phenanthrenequinone, triphenylphosphine and 1,2-bis(diphenylphosphino)ethane were chosen as coordinating ligands. Stretching frequencies $\upsilon$ (Mo-Cl) of Mo(IV) appear at higher frequencies than those of Mo(III) complexes due to the increasing oxidation number of metal. $MoCl_4(L)_2$ exhibit one Mo-Cl stretching frequency, whereas Mo$Cl_4$(L^L) exhibit four Mo-Cl stretching frequencies. The number of Mo-Cl stretching frequency suggestes the former complexes have trans($D_{4h}$) and the latter complexes have cis($C_{2v}$) symmetry. Stretching frequency ${\nu}g(C{\equiv}N)$ of acetonitrile in Mo(III) complexes are shifted to about 30 $cm^{-1}$ higher frequency compared with that of a free ligand (2260 $cm^{-1}$). These spectral data indicates that Mo(III) complexes are in the octahedral geometries with the coordinated acetonitrile. Finally each molybdenum(III) and (IV) complexes showed the following formulation; $[MoCl_4(L)_2]$,[Mo$Cl_4$(L^L)], $[MoCl_3(L)_2MeCN]$ and [Mo$Cl_3$(L^L)MeCN].

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.14 no.4
• /
• pp.135-139
• /
• 2004

The layered organic-inorganic hybrid compounds($C_6H_5CH_2NH_3)_2CuCl_4$ and ($NH_3C_6/H_4C_2H_4_6/H_4NH_3)CuCl_4$ have been directly synthesized. From the X-ray diffraction data and the organic guest size, the orientation of the intercalated organic amine was determined. The inorganic sheets consist of $CuCl_4^{2-}$layers of comer-sharing octahedra copper chloride. The protonated organic amine was intercalated into the $CuCl_4^{2-}$layers with bilayer structure for ($C_6H_5CH_2NH_3)_2CuCl_4$ and monolayer structure for ($NH_3C_6/H_4C_2H_4_6/H_4NH_3)CuCl_4$.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.4
• /
• pp.544-549
• /
• 1998

The single crystal of $KMgCl_3$ was grown in Ar atmosphere by Czochralski method for the first time. For the stoichiometric composition, $K_2MgCl_4$ crystal was obtained, and the nonstoichiometric method was used for the $KMgCl_3$ crystal growth. The phase transition sequences of $KMgCl_3$ were investigated by the DTA, DSC and the ferroelastic properties by using the high temperature polarizing microscope and the thermomechanical system. The temperature dependences of the ferroelastic domains and the spontaneous strain obtained from the stress-strain hysteresis loops were analyzed.

• Journal of the Korean Ceramic Society
• /
• v.32 no.7
• /
• pp.809-816
• /
• 1995

Ti1-xAlxN films were successfully deposited on high speed steel and silicon wafer by plasma-assisted chemical vapor deposition using a TiCl4/AlCl3/N2/Ar/H2 gas mixture. Plasma process enabled N2 gas to nitride AlCl3, which is not possible in sense of thermodynamics. XPS analyses revealed that the deposited layer contained Al-N bond as well as Ti-N bond. Ti1-xAlxN films were polycrystalline and had single phase, B1-NaCl structure of TiN. Interplanar distance, d200, of (200) crystal plane of Ti1-xAlxN was, however, decreased with Al content, x. Al incorporation into TiN caused the grain size to be finer and changed strong (200) preferred orientation of TiN to random oriented microstructure. Those microstructural changes with Al addition resulted in the increase of micro-hardness of Ti1-xAlxN film up to 2800Kg/$\textrm{mm}^2$ compared with 1400Kg/$\textrm{mm}^2$ of TiN.