• Journal of Ceramic Processing Research
• /
• v.19 no.6
• /
• pp.461-466
• /
• 2018

The effects of Ca/Sr ratio and the sintering temperature on the properties of $(Ca_xSr_{(1-x)})ZrO_3$ (CSZ) ceramics were investigated in this study. CSZ ceramics were prepared using solid-state reaction process, which were sintered in air at temperatures ranging from $1350^{\circ}C$ to $1450^{\circ}C$. Their structures were characterized by X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), and Transmission Electron Microscopy (TEM). The change in Ca/Sr ratio significantly affected the crystalline phase and the dielectric properties of the $(Ca_xSr_{(1-x)})ZrO_3$ ceramics. The secondary phase, $Ca_{0.15}Zr_{0.85}O_{1.85}$, was observed and increased correspondingly with the rising of sintering temperatures. In order to understand the effects of secondary phase on the dielectric properties of CSZ ceramics, the $Ca_{0.15}Zr_{0.85}O_{1.85}$ phase was prepared individually using solidstate method. The $Ca_{0.15}Zr_{0.85}O_{1.85}$ ceramics sintered at $1500^{\circ}C$ for 2 hours possessed a dielectric constant (${\varepsilon}_r$) of 21.7, a dielectric loss ($tan{\delta}$) of $49.510^{-4}$ and an Insulation Resistance (IR) of $2.1{\times}10^{10}{\Omega}$. The ($Ca_{0.7}Sr_{0.3})ZrO_3$ ceramics exhibited the best dielectric properties, with a permittivity of 29, a dielectric loss ($tan{\delta}$) of $2.7{\times}10^{-4}$, and an Insulation Resistance (IR) of $2.6{\times}10^{12}{\Omega}$.

• Food Science and Preservation
• /
• v.8 no.1
• /
• pp.1-8
• /
• 2001

Effects of storage method and duration on the post-storage quality changes of deastringencied persimmons were investigated. Astringent persimmons(Diospyros kaki T. cv. Chungdobansi) were treated for 39 hours in 70% CO$_2$+5% O$_2$ at 25 $\^{C}$ for astringency removal, and then stored in CA(5%CO$_2$+3%O$_2$, 8%CO$_2$+3%O$_2$), MAP(0.06 mm LDPE film, 5.2%CO$_2$+6.8%O$_2$) and air at 0$\^{C}$ for 15, 45, 75 arnd 105 days. Subsequent to the storage, persimmons were held in air at 10$\^{C}$ for 4 days. The difference of firmness loss in relations to storage methods at O$\^{C}$ during holding at 10$\^{C}$ observed in fruits stored above 45 days at 0$\^{C}$, CA(8%CO$_2$+3%O$_2$) storage was more retarded the firmness loss than the others. Soluble solids during holding at 10$\^{C}$ trended to decrease in fruits stored above 75 days at 0$\^{C}$, CA and MAP storage were a little effective to keeping soluble solids. Titratable acidity during holding at 10$\^{C}$, decreased in fruits stored until 75 days at 0$\^{C}$ regardless storage methods. Sensory characteristics, color, hardness and overall acceptability of fruits stored in CA were significantly higher than those of fruits stored in MAP and air during shelf-life at 10$\^{C}$ after long-term storage at 0$\^{C}$ . These results show that the storage conditions had residual effect on the quality of deastringencied persimmons during shelf-life after long-term storage.

• The Korean Journal of Food And Nutrition
• /
• v.11 no.3
• /
• pp.329-333
• /
• 1998

The effects of 0.5%(v/v) acetic acid (AA), 0.5%(v/v) lactic acid(LA), or 0.5%(v/w) citric acid(CA) on gram-negative bacterial counts (GNC) and aerobic plate counts (APC) in flatfish strips stored at 4$^{\circ}C$ or 1$0^{\circ}C$ were assessed. Treatments of 0.5% AA were completely (P<0.05) inhibited GNC compared to the initial controls for 12 days at 4$^{\circ}C$. Treatments of either LA or CA rapidly increased GNC compared to those of AA after 9 days at 4$^{\circ}C$. Treatments of AA were microbiological acceptable for 6 days at 1$0^{\circ}C$, but those of LA and CA did not lasted. AA treatments were completely (P<0.05) inhibited aerobic spoilage bacteria (APC) compared to the initial controls for 6 days at 4$^{\circ}C$. Treatments containing either 0.5% LA or 0.5% CA were ineffective after 9 days at 4$^{\circ}C$ and 3 days at 1$0^{\circ}C$, respectively. Based on these results, AA treatment was the most effective for suppressing the growth of aerobic spoilage bacteria during storage at both 4 and 1$0^{\circ}C$. Flatfish strips treated with 0.5% AA extended microbiological shelf-life for 12 days at 4$^{\circ}C$.

• Journal of the Korean Ceramic Society
• /
• v.31 no.6
• /
• pp.629-636
• /
• 1994

The ferrimagnetic glass-ceramics in the system Fe2O3-CaO-SiO2 for hyperthermia were investigated. Glasses could be prepared up to the content of 40 wt% of Fe2O3 and below the weight ratio of 1.0 of CaO/SiO2. The maximum saturation magnetization and the maximum coercive force were 29.85 emu/g and 340.1 Oe respectively, for a glass 40Fe2O3.20CaO.40SiO2 composition heat-treated at 95$0^{\circ}C$ for 8 hours. And for a glass 40Fe2O3.30CaO.30SiO2 composition the maximum saturation magnetization and the maximum coercive force were 18.47 emu/g and 374.4 Oe heat-treated at 1,00$0^{\circ}C$ and 90$0^{\circ}C$ for 8 hours respectively. The maximum hysteresis loss was 1,726.3 cal/g for a glass 40Fe2O3.20CaO.40SiO2 composition heat-treated at 95$0^{\circ}C$ for 8 hours. It was found that the ferrimagnetic Fe2O3.CaO.SiO2 glass-ceramics was little injurious to human body as results of biocompatibility test and biotoxicity test.

• Journal of the Korean Ceramic Society
• /
• v.27 no.3
• /
• pp.383-388
• /
• 1990

Hydraulic properties of CA2-based clinker synthesized by Hydration-Burning Method was studied by calorimetry, analysis of suspension, thermogravimetry, scanning electron microscopy and X-ray diffractometry. Hydraulic properties of the clinker was so activated that heat of hydration of the clinker evolved faster than that of CA synthesized by conventional method. In suspension of W/C=33, dissolution of the clinker began at nearly same time as that of CA, but precipitation of AH3 and rise of [OH-] occurred fairly faster in the suspension of the clinker than that of CA. From the beginning of hydration, AH3 was produced and became a main phase of the hydrate with minor phase of CAH10 and C2AH8, but C3AH6 was not produced at ambient temperature.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.196-199
• /
• 2000

마이크로파용 세라믹 유전체로 사용되는 MgTiO$_3$-CaTiO$_3$계 유전체에 Li을 첨가하여 이때 얻어지는 마이크로파 유전특성과 소결특성에 대하여 알아보았다. 94MgTiO$_3$-6CaTiO$_3$으로 주조성을 고정시키고 여기에 Li$_2$CO$_3$를 Li원자 기준으로 0 ~ 10 mol% 범위 안에서 첨가하여 1200~140$0^{\circ}C$의 온도에서 4시간 소결하였다. Li의 첨가량이 적을 때에는 유전체의 품질계수와 유전상수가 모두 감소하였으나 약 lmol% 이상 되면 다시 증가하였으며, 이후 첨가량이 과도해지면 다시 서서히 감소하는 경향을 볼 수 있었다. 1.0 ~ 3.0 mol%의 첨가량 범위 안에서 Li은 MgTiO$_3$-CaTiO$_3$계 유전체의 품질계수를 증가시켜주는 역할을 하는 것으로 나타났다 1.5mol%의 Li을 첨가하고 1275$^{\circ}C$에서 4시간 소결한 시편에서 유전상수는($\varepsilon$$_{r}$) 20.0, Qf는 78,000 그리고 공진주파수 온도계수($\tau$$_{f}$)는 -1.6ppm/$^{\circ}C$의 결과를 얻을 수 있었다.다.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.52 no.6
• /
• pp.249-256
• /
• 2003

Samples with the nominal composition, Ag-$Bi_{1.84}Pb_{0.34}Sr_{1.91}Ca_{2.03}Cu_{3.06}O_{10+{\delta}}$ high $T_{c}$ superconductors containing Ag as an additive were fabricated by a solid-state reaction method. Samples with Ag of 10 wt%, 30 wt%, and 50 wt% each were sintered at $860^{\circ}C$~$870^{\circ}C$ for 24 hours. The structural characteristics, the microstructures and the critical temperature with respect to the each samples were investigated by XRD, four-prove methode, SEM and EDS respectively. The $T_{c}\;^{zero}$ of the sample with the 50 wt% Ag additive at the surface showed 94 K.

• Radiation Oncology Journal
• /
• v.11 no.1
• /
• pp.17-27
• /
• 1993

To investigate the relationship between radiosensitivity and postirradiation recovery in human cancer cells, a study was performed using human cancer cell lines-A549, CaSki, SNU-C5 and PCI-13. For the study of radiosensitivity, single doses of 2, 4, 6, 8, 10, 12, and 14 Gy were given and for postirradiation recovery, two fractions of 4 Gy were separated with a time interval of 0, 0.5, 1, 1.5, 2, 2.5, 3, 4, 5, or 6 hours. Surviving fraction was estimated using colony forming ability. Surviving fractions at 2 Gy (SF2) were 0.496 (0.570-0.412) for A549, 0.496 (0.660-0.332) for CaSki, 0.386 (0.576-0.216) for SNU-C5, and 0.185 (0.247-0.123) for PCI-13. By statistical analysis the SF2 of PCI-13 was lower significantly than those of others (p<0.05). This difference was also observed at 4, 6 and 8 Gy dose levels. At 6 and 8 Gy the surviving fractions of SNU-C5 were also lower significantly than A549 and CaSki (p<0.05). By the analysis with linear quadratic model, the values of ${\alpha}$ for A549, CaSki, SNU-C5 and PCI-13 were 0.3016, 0.3212, 0.4327 and 0.8423, respectively, and those of ${\beta}$ were 0.02429, 0.02009, 0.03349 and 0.00059, respectively. So, the value of ${\alpha}$ showed increasing tendency with decreasing SF2. By the multitarget single hit model the values of Do for A549, CaSki, SUN-C5 and PCI-13 were 1.97, 1.97, 1.46 and 0.81, respectively, and those of n were 1.53, 1.50, 1.56 and 2.28, respectively. So, the value of Do decreased with decreasing SF2. Post-irradiation recovery reached plateau at around 2 hours. Recovery ratio at plateau phase ranged from 1.2 to 4.2; the value were 1.2 for PCI-13, 3.2 for CaSki, 3.3 for SNU-C5, and 4.2 for A549. Recovery rate well correlated with SF2, and increased with increasing Do and decreasing ${\alpha}$. According to above results, the intrinsic radiosensitivity was quite different among the tested cell lines; PCI-13 was the most sensitive and A549 and CaSki was similar. This difference of radiosensitivity is thought to be partly due to the difference in amount of postirradiation recovery. By linear quadratic model the difference of ${\alpha}$ values was very high, and by multitarget single hit model the difference of Do value was significantly high among four cell lines.

• Korean Journal of Materials Research
• /
• v.18 no.1
• /
• pp.22-25
• /
• 2008

In this study, calcium titanate $(CaTiO_3)$ gel was prepared by mixing calcium nitrate and titanium isopropoxide in 2-methoxy-ethanol. $CaTiO_3$ gel was single-layer coated on Ti-6Al-4V using a sol-gel dip-coating technique. The coating was calcined at $750^{\circ}C$ in air by utilizing a very slow heating rate of $2^{\circ}C/min$. The crystalline phases of the coating were characterized by x-ray diffraction using a slow scan rate of $1^{\circ}/min$. The morphology of the coating was analyzed by scanning electron microscopy. The corrosion behavior of Ti-6Al-4V samples coated with $CaTiO_3$ films were tested in an artificial saliva solution by potentiodynamic polarization and were quantified by the Tafel extrapolation method. The electrochemical parameters showed a considerable increase in the corrosion resistance for the $CaTiO_3$-coated Ti-6Al-4V samples compared to bare substrates.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.342-343
• /
• 2005

In this study,. the microwave dielectric properties of the $0.6TiTe_3O_8-0.4CaWO_4$ ceramics with sintering temperature were investigated for LTCC application. According to the X-ray diffraction patterns, the $0.6TiTe_3O_8-0.4CaWO_4$ ceramics had columbite structure of the $TiTe_3O_8$ phase and scheelite structure of the $CaWO_4$ phase. Increasing the sintering temperature, the bulk density, the dielectric constant and the quality factor of the $0.6TiTe_3O_8-0.4CaWO_4$ ceramics were increased. In the case of the $0.6TiTe_3O_8-0.4CaWO_4$ ceramics sintered at $810^{\circ}C$, the bulk density, the dielectric constant and the quality factor were 5.72$g/cm^2$, 33.6, 22,013GHz respectively.