• 한국토양비료학회지
• /
• 제32권4호
• /
• pp.333-343
• /
• 1999

본 연구는 호염성(胡鹽性) 이면서 호칼슘 식물로 알려진 사탕무에서 일가이온인 K와 Na 그리고 이가 이온인 Ca와 Sr 및 Mg의 식물체내 수송과 분포를 밝히고자 수행하였다. Sr의 흡수와 재분배과정은 근권의 이온농도와 생육단계와 밀접한 관계가 있었다. Ca 4 mM과 Sr 1 mM을 처리했을 때 체내 Ca 함량이 가장 높았던 반면 Sr의 함량은 1mM Ca와 4 mM Sr을 혼합처리 했을 때 가장높았다. 즉 낮은 농도의 Sr을 처리했을 때 Ca의 흡수가 가장 높았다. 이러한 결과는 Ca와 Sr의 상가적 흡수기작 때문으로 추정되었다. Mg함량에 대한 Ca와 Sr총 함량은 고도의 부의 상관을 나타냈다. 결과적으로 Mg와 Sr 및 Ca는 상호 길항적으로 흡수되는 것을 알수 있었다. 5mM Sr 존재 하에서만 K와 Na의 흡수가 증가하는 반면 Ca와 Sr의 혼합처리는 이들 이온과는 무관하였다. 따라서 K/Na Ratio 또한 변화되지 않았다. 소량(1mM)의 Sr 첨가는 Chlorophyll 분해를 저지하는 효과를 보였다.

• 반도체디스플레이기술학회지
• /
• 제5권4호
• /
• pp.5-9
• /
• 2006

The SCT thin films are deposited on Pt-coated electrode($Pt/TiN/SiO_2/Si$) using RF sputtering method with Sr/Ca ratio. The maximum grain of thin films is obtained by ratio of Ca at 15 mol%. The dielectric constant was increased with increasing the ratio of Ca, while it was decreased if the ratio of Ca exceeded over 15 mol%. The dielectric constant changes almost linearly in temperature ranges of $-80{\sim}+90$. All SCT thin films used in this study show the phenomena of dielectric relaxation with the increase of frequency, and the relaxation frequency is observed above 200 kHz. The current-voltage characteristics of SCT thin films showed the increasing leakage current as the measuring temperature increases.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.181-183
• /
• 2009

Comparative study of the dependence of the firing voltage of MgSrO and MgCaO protective layers on chemical composition was carried out. It was observed that the firing voltage increases when CaO/MgO or SrO/MgO ratio increases.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권7호
• /
• pp.680-689
• /
• 1996

SrCaCuO와 BiPbCuO 화합물로 이루어진 이중층시료가 만들어 졌으며, 소결과정에서 나타나는 확산과 입자간의 상호작용으로 108K의 임계온도를 나타내었다. 이 시료는 820.deg. C에서 0-210 시간동안 소결되었다. 초전도체의 생성, 성장메카니즘과 임계온도의 관계가 연구되었으며, 최적조건은 820.deg. C에서 210시간 소결하고 SrCaCuO와 BiPbCuO의 도포비가 1:0.6인 시편에서 나타났다. 또한 이중층시료에서 가장 좋은 조성비는 S $r_{2}$C $a_{2}$C $u_{2}$ $O_{x}$와 B $i_{1.9}$P $b_{0.5}$C $u_{3}$ $O_{y}$ 이었다.다.

• 한국전기전자재료학회논문지
• /
• 제16권11호
• /
• pp.1029-1034
• /
• 2003

The Bi$_2$Sr$_2$Ca$_{n}$Cu$_{n+1}$ O$_{x}$, superconducting thin films arc fabricated by using the sputtering and evaporation method. Because we confirmed the sticking ratio of Bi element in the Bi$_2$Sr$_2$Ca$_{n}$Cu$_{n+1}$ O$_{x}$ superconducting thin film fabricated by using the sputtering method was much lower than the expected value, to get the enough number of the flakes of Bi, faraday cup was used to evaporate Bi clement. As a result of the fabrication, Bi 2201 and Bi 2212 single phases could be made by the optima of deposition condition. And we confirmed the sticking coefficient of Bi element was clearly related to the temperature change of the substrate and the generation of Bi22l2 phase

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.597-600
• /
• 2002

Electrical properties of $\{(Sr_xCa_{1-x})_{0.95-y-z}Bi_2Pb_{0.05+y}\})Ti_{1.02}O_3$ ceramic were studied as a function of Sr/Ca ratio and Bi, Pb contents. Dielectric properties of specimens with different x, y, z values were explained in terms of ionic polarizability with Molecular Additionally Rules and Clausius-Mosotti equation. For the composition of $\{(Sr_{0.62}Ca_{0.38})_{0.90}Bi_{0.01}Pb_{0.09}\})Ti_{1.02}O_3$ and $\{(Sr_{0.62}Ca_{0.38})_{0.905}Bi_{0.015}Pb_{0.08}\})Ti_{1.02}O_3$, dielectric constant$({\varepsilon}_r)$, quality factor(Q) and temperature coefficient(TC) were 389, 3048, -1490 and 394, 1869, -1340 at 1MHz, respectively.

• Journal of Ceramic Processing Research
• /
• 제19권6호
• /
• pp.461-466
• /
• 2018

The effects of Ca/Sr ratio and the sintering temperature on the properties of $(Ca_xSr_{(1-x)})ZrO_3$ (CSZ) ceramics were investigated in this study. CSZ ceramics were prepared using solid-state reaction process, which were sintered in air at temperatures ranging from $1350^{\circ}C$ to $1450^{\circ}C$. Their structures were characterized by X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), and Transmission Electron Microscopy (TEM). The change in Ca/Sr ratio significantly affected the crystalline phase and the dielectric properties of the $(Ca_xSr_{(1-x)})ZrO_3$ ceramics. The secondary phase, $Ca_{0.15}Zr_{0.85}O_{1.85}$, was observed and increased correspondingly with the rising of sintering temperatures. In order to understand the effects of secondary phase on the dielectric properties of CSZ ceramics, the $Ca_{0.15}Zr_{0.85}O_{1.85}$ phase was prepared individually using solidstate method. The $Ca_{0.15}Zr_{0.85}O_{1.85}$ ceramics sintered at $1500^{\circ}C$ for 2 hours possessed a dielectric constant (${\varepsilon}_r$) of 21.7, a dielectric loss ($tan{\delta}$) of $49.510^{-4}$ and an Insulation Resistance (IR) of $2.1{\times}10^{10}{\Omega}$. The ($Ca_{0.7}Sr_{0.3})ZrO_3$ ceramics exhibited the best dielectric properties, with a permittivity of 29, a dielectric loss ($tan{\delta}$) of $2.7{\times}10^{-4}$, and an Insulation Resistance (IR) of $2.6{\times}10^{12}{\Omega}$.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제27권2호
• /
• pp.76-86
• /
• 2022

Calcium (Ca) and potassium (K) were introduced to remove Sr and Cs in soil, respectively. Four factor and three level Box-Bhenken design was employed to determine the optimal washing condition of Ca- and K-based solutions, and the ranges tested were 0.1 to 1 M of Ca or K, L/S ratio of 5 to 20, washing time of 0.5 to 2 h, and pH of 2 to 7. The optimal washing condition determined was 1 M of Ca or K, L/S ratio of 20, washing time of 1 h, and pH of 2, and Ca-based and K-based solutions showed 68 and 81% removal efficiency for Sr and Cs, respectively in soil. For comparison, widely used conventional washing agents such as 0.075 M EDTA, 0.01 M citric acid, 0.01 M oxalic acid, and 0.05 M phosphoric acid were tested, and they showed 25 to 30% of Sr and Cs removal efficiency. Tessier sequential extraction was employed to identify the changes in chemical forms of Sr and Cs during the washing. In contrast to the conventional washing agents, Ca-based and K-based solutions were able to release relatively strongly bound forms of Sr and Cs such as Fe/Mn-oxide and organic matter bound forms, suggesting the involvement of direct substitution mechanism, probably due to the physicochemical similarities between Sr-Ca and Cs-K.

• Korean Chemical Engineering Research
• /
• 제44권3호
• /
• pp.284-288
• /
• 2006

분무열분해법을 이용하여$(Ca,Sr)_{2-y}MgSi_2O_7:Eu^{2+}{_y}$ 형광체 분말을 제조하고 $Eu^{2+}$의 농도, 후열처리온도 변화 및 Ca/Sr 비에 따른 발광특성을 조사하였다. 또한, Ca/Sr의 비를 변화시켜 발광특성의 변화를 관찰하였다. $Ca_2MgSi_2O_7$나 $Sr_2MgSi_2O_7$ 분말 모두 $1,000^{\circ}C$ 이상의 온도에서 열처리를 했을 때 순수한 정방정계 상이 제조되었다. $Ca_2MgSi_2O_7:Eu^{2+}{_y}$ 녹색 형광체는 $Eu^{2+}(y)$의 농도가 5 mol％, 후열처리 온도가 $1,250^{\circ}C$ 일 때 가장 높은 발광 강도는 보였다. ${(Ca_{1-x},Sr_x)}_{1.95}MgSi_2O_7:{Eu^{2+}}_{0.05}$의 발광 파장은 Sr의 농도가 증가함에 따른 결정장 감소로 인해 524nm에서 456nm로 점진적으로 blue shift 되었다. $Sr_2MgSi_2O_7:Eu^{2+}$는 Sr 자리에 약 10 mol％ Ca를 치환시킴으로써 청색 형광체의 발광 강도는 크게 향상되었다. 제조된 분말들은 치밀하지 못하고 다공성 구조를 가져 후열처리 전에는 구형을 유지하였으나 열처리($900{\sim}1,300^{\circ}C$) 후에는 구형의 형상을 잃고 입자들 간의 응집이 발생하였다.

• 분석과학
• /
• 제11권4호
• /
• pp.248-253
• /
• 1998

수용액에서 poly-dibenzo-18-crown-6를 이용한 알칼리, 알칼리토금속이온 및 전이금속이온들의 흡착 및 분리특성을 조사하였다. 알칼리금속이온들과 알칼리토금속이온들의 흡착정도와 분포비의 순위는 각각 Li(I)