• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.4
• /
• pp.634-639
• /
• 1998

$Y_2O_3$ and $Nb_2O_5$ co-doped zirconia composites containing 10~30 vol% $Al_2O_3$ with two different particle sizes were sintered for 5 h at $1550^{\circ}C$ to evaluate low-temperature phase stability of the composite using X-ray diffractometry after heat-treatments for 1000 h at $250^{\circ}C$ in air or for 5 h at $180^{\circ}C$ in 0.3 MPa $H_2O$ vapor pressure. No tetragonal to monoclinic phase transformation during degradation, so called enhanced low-temperature phase stability, was observed for all composites. It is concluded that Nb addition to the composite for the phase stability is more effective than $Al_2O_3$ addition. The optimum combination of strength (670 MPa) and fracture toughness ($7.1{\textrm} {MPam}^{1/2}$) were obtained for the composite containing 20 vol% of $Al_2O_3$ with 2.8 $\mu$m to 0.2 $\mu$m, the flexural strength increases but the fracture toughness decreases.

• Journal of the Korean Ceramic Society
• /
• v.43 no.4 s.287
• /
• pp.242-246
• /
• 2006

[ ${\alpha}-Al_2O_3$ ] nanopowders were fabricated by the thermal decomposition and synthetic of Ammonium Aluminum Carbonate Hydroxide (AACH). Crystallite size of 5 to 8 nm were fabricated when reaction temperature of AACH was low, $8^{\circ}C$, and the highest $[NH_4{^+}][AlO(OH)_n{(SO_4){^-}}_{3-n/2}][HCO_3]$ ionic concentration to pH of the Ammonium Hydrogen Carbonate (AHC) aqueous solution was 10. The phase transformation fem $NH_4Al(SO_4)_2$, rhombohedral $(Al_2(SO_4)_3)$, amorphous-, ${\theta}-,\;{\alpha}-Al_2O_3$ was examined at each temperature according to the AACH. A Time-Temperature-Transformation (TTT) diagram for thermal decomposition in air was determined. Homogeneous, spherical nanopowders with a particle size of 70 nm were obtained by firing the 5 to 8 m crystallites, which had been synthesized from AACH at pH 10 and $8^{\circ}C,\;at\;1150^{\circ}C$ for 3 h in air.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1165-1166
• /
• 2006

An experiment was carried out to investigate the effect of Ba Stearate as a reducing agent on the magnetic and physical properties of anisotropic $BaFe_2-W$ type ferrite magnets. It was found that the magnetic properties of $BaO{\cdot}8.5Fe_2O_3$ were improved by adding 0.3 wt% of Ba Stearate, 0.5 wt% of $SiO_2$, and 0.5 wt% of CaO together. The optimum conditions for making magnets were as follows; semisintering condition: $1350^{\circ}C{\times}4.0$ h in nitrogen gas atmosphere, drying condition: $180^{\circ}C{\times}2.0$ h in air, sintering condition: $1160^{\circ}C{\times}1.5$ h in nitrogen gas atmosphere. Magnetic and physical properties of a typical sample were $J_m$ = 0.46 T, $J_r$ = 0.43 T, $H_{cJ}$ = 182.3 kA/m, $H_{cB}$ = 177.2 kA/m, $(BH)_{max}$ = 33.8 kJ/$m^3$, $T_C$ = $495^{\circ}C$ and $K_A$ = $2.65{\times}10^5\;J/m^3$ and $H_A$ = 1332 kA/m.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.8
• /
• pp.671-679
• /
• 2007

[ $SrAl_2O_4:Eu^{2+},\;Dy^{3+}$ ] phosphor was synthesized using the impregnation method, and its photoluminescence and long-afterglow properties were investigated, A mixture of $Sr(NO_3)_2,\;Al(NO_3)_2\;9H_2O,\;EuCl_3\;6H_2O,\;DyCl_3\;6H_2O,\;NdCl_3\;6H_2O$ salts were dissolved in distilled water and impregnating into the polymer precursor. After drying, the impregnated mixture was heat treated at $900-1400^{\circ}C$ for 2h in a $N_2-H_2$ reduction atmosphere. The microstructure and crystal structure of the $SrAl_2O_4:Eu^{2+},\;Dy^{3+}$ powders were examined by scanning electron microscopy and X-ray diffraction, respectively. The photoluminescence spectra showed an excitation band along over wide wavelength of 250-450nm, and a broaden emission with a maxima peak at 360nm. In addition, the spectra also showed a good long after glow that decayed over a 1000sec period after 10 min excitation illumination.

• Journal of the Korean Ceramic Society
• /
• v.22 no.4
• /
• pp.54-60
• /
• 1985

Gas sensing materials for detecting flammable gases such as $CH_4$, $C_3H_8$ and n-$C_4H_{10}$ were developed by util-izing $In_2O_3$ as the principal sensing material. The sensing materials were formulated by mixing $In_2O_3$ powder with one or two other chemicals such as $SnO_2$, $Y_2O_3$ and $Al_2O_3$ with a small addition of $PdCl_2$ as a catalyst. Sample of sensor were fabricated by coating each of the mixtures on a ceramic tube impregnating ethylsili-cate and firing at 75$0^{\circ}C$ Each material mixture was evaluated by measuring and comparing gas sensitivity(resistance in air/resistance with gas) to flammable gases such as $CH_4$, $C_3H-8$ and n-$C_4H_{10}$. It was found that among fifteen compositions tested three compositions as follows show the highest gas sensitivity and thus are very feasible for commercialization as the gas sensors ; o49.5 $In_2O_3$+50 Al2O3_0.5 PdCl2(wt%) o $20In_2O_3+29$ $SnO_2+50$ $Al_2O_3+1$ $PdCl_2$(wt%) o40 $In_2O_3$+9 $Y_2O_3+50$ $Al_2O_3+1$ $PdCl_2$(wt%)

• Korean Journal of Materials Research
• /
• v.10 no.3
• /
• pp.233-240
• /
• 2000

In order to fabricate dense cordierite ceramics without sintering aid, thermal behavior of Mg-Al-Si compounds during sintering was investigated. The dispersibility of cordierite suspension in aqueous media was measured by ESA(electrokinetic sonic amplitude). To prevent aggregation and insufficient dispersion of the cordierite sol, the pH of the suspension was controlled to 1.03 and 8.30 by adding $2N\;HNO_3$ and $2N\;NH_4OH$, respectively. Magnesium-aluminum-silicate complex gel coexisted in the specimen which has been gelled at $150^{\circ}C$ fir 12 hours, however several metastable phase such as ${\mu}-cordierite(Mg_2Al_4Si_5O_{18}),\;spine(MgAl_2O_4)\;and\;mullite(Al_6Si_2O_{13})$ existed below $1300^{\circ}C$ Nucleation rates of the two suspension were similar, but densification of the gel was sensitive to the pH of the sol. Densification of the sol with the pH of 8.3 was more pronounced than that of the sol with pH of 1.63.

• Journal of Environmental Science International
• /
• v.20 no.2
• /
• pp.251-260
• /
• 2011

$TiO_2$- and $SiO_2$-supported $Co_3O_4$, Pt and $Co_3O_4$-Pt catalysts have been studied for CO and $C_3H_8$ oxidations at temperatures less than $250^{\circ}C$ which is a lower limit of light-off temperatures to oxidize them during emission test cycles of gasoline-fueled automotives with TWCs (three-way catalytic converters) consisting mainly of Pt, Pd and Rh. All the catalysts after appropriate activation such as calcination at $350^{\circ}C$ and reduction at $400^{\circ}C$ exhibited significant dependence on both their preparation techniques and supports upon CO oxidation at chosen temperatures. A Pt/$TiO_2$ catalyst prepared by using an ion-exchange method (IE) has much better activity for such CO oxidation because of smaller Pt nanoparticles, compared to a supported Pt obtained via an incipient wetness (IW). Supported $Co_3O_4$-only catalysts are very active for CO oxidation even at $100^{\circ}C$, but the use of $TiO_2$ as a support and the IW technique give the best performances. These effects on supports and preparation methods were indicated for $Co_3O_4$-Pt catalysts. Based on activity profiles of CO oxidation at $100^{\circ}C$ over a physical mixture of supported Pt and $Co_3O_4$ after activation under different conditions, and typical light-off temperatures of CO and unburned hydrocarbons in common TWCs as tested for $C_3H_8$ oxidation at $250^{\circ}C$ with a Pt-exchanged $SiO_2$ catalyst, this study may offer an useful approach to substitute $Co_3O_4$ for a part of platinum group metals, particularly Pt, thereby lowering the usage of the precious metals.

• Microbiology and Biotechnology Letters
• /
• v.1 no.1
• /
• pp.51-57
• /
• 1973

2,2'-Methylene bis (3,4,6-trichloroacetoxy benzene) had been synthesized from Hexachlorophene. The eleven new derivatives -(2,2'Methylene bis [3,4,6-trichloro o-(${\beta}$-anilinopropionoxy) benzene]: m. p 173∼4$^{\circ}C$, C$\_$31/H$\_$24/N$_2$O$_4$Cl$\_$6/, 2,2' Methylene bis [3,4,6-trichloro (${\beta}$-Cyclohexylaminopropionoxy) benzene]: M. P, 187∼8$^{\circ}C$, C$\_$31/H$\_$36/N$_2$O$_4$Cl$\_$6/, 2,2'-Methylene bis [3,4,6-trichloro (${\beta}$-phenyl hydrazinopropionoxy) benzene]; M. P. 151∼3$^{\circ}C$, C$\_$33/H$\_$28/N$_2$O$_4$Cl$\_$6/, 2,2'-Methylene bis [3,4,6-trichloro (${\beta}$-o-toluidinopropionoxy) benzene]: M. P. 172∼3$^{\circ}C$, C$\_$33/H$\_$28/N$_2$O$_4$Cl$\_$6/, 2,2'-Methylene bis [3,4,6-trichloro (${\beta}$-p-todudinopropionoxy) benzene]: 153∼4$^{\circ}C$, C$\_$33/H$\_$28/N$_2$O$_4$Cl$\_$6/, 2,2'-Methylene bis [3,4,6-trichloro (${\beta}$-o-chloro anilinopropionoxy) benzene]: 170∼2$^{\circ}C$, C$\_$31/H$\_$27/N$_2$O$_4$Cl$\_$8/, 2,2'-Methylene bis [3,4,6-trichloro (${\beta}$-p-sulfamilinopropionoxy) bengene]: M. P. 310-5$^{\circ}C$, C$\_$31/H$\_$24/N$_2$S$_2$O$\_$10/Cl$\_$8/, 2,2'-Methylene bis [3,4,6-trichloro (${\beta}$-piperidinopropionoxy) benzene]: M. P. 168∼2$^{\circ}C$, C$\_$29/H$\_$32/N$_2$O$_4$Cl$\_$6/, 2,2'-Methylene bis (3,4,6-trichloro (${\beta}$-morpholinopropionoxy) benzene]: M. P. 226∼8$^{\circ}C$, C$\_$27/H$\_$28/N$_2$O$\_$6/Cl$\_$6/, 2,2'-Methylene bis (3,4,6-trichloro (${\beta}$-2-amino pyridino propionoxy) benzene]; M. P. 145∼6$^{\circ}C$, C$\_$29/H$\_$22/N$_4$O$_4$Cl$\_$5/-were synthesized by Mannichs reaction as potential antimicrobial agents and their antimicrobial activity were tested against Bacillus subtilis, Pseudomonas ovalis, Escherichia coli, Staphylococcus aureus, aerogenes, Bacillus Acerobacter Polymyxa, Bacillus brevis, Streptomyces griseus, Candida troficalis, Rhodotorula glutinis, Candida utilis, Hansenula anamola, Saccharomyces cerevisiae in vitro. Among them, compounds of benzylamine and p-toludine showed an effective antimibrobial activity againt Bacillus subtilis and Pseudomonas ovalis.

• Journal of the Korean Ceramic Society
• /
• v.39 no.10
• /
• pp.928-934
• /
• 2002

Gallium doped Zinc Oxide(GZO) films were deposited by dc magnetron sputtering using a GZO ceramic target at various conditions such as substrate temperature (RT, 400), residual water pressure ($P_{H_2O}$; 1.61${\times}10^{-4}∼2.2{\times}10^{-3}$ Pa), introduction of $H_2$ gas (8.5%) and different magnetic field strengths(250, 1000G). GZO films deposited without substrate heating showed clear degradation in film crystallinity and electrical properties with increasing $P_{H_2O}$. The resistivity increased from 3.0${\times}10^{-3}$ to 3.1${\times}10^{-2}{\Omega}㎝$ and the grain size of the films decreased from 24 to 3 nm when PH2O was increased from 1.61${\times}10^{-4}$ to 2.2${\times}10^{-3}$ Pa. However, degradation in electrical properties with increasing $P_{H_2O}$ was not observed for the films deposited with introduction of 8.5% $H_2$. When magnetic field strength of the cathode increased from 250G to 1000G, crystallinity and electrical properties of GZO films improved remarkably about all the $P_{H_2O}$. This result could be attributed to the decrease in film damage caused by the decrease in plasma impedance.

• Korean Journal of Crystallography
• /
• v.10 no.2
• /
• pp.125-129
• /
• 1999

X-선 회절법을 이용하여 1-(3 Carbamoyl-3,3-diphenylpropyl)-1-methylhexahydro-1H-azepinium iodide[이하: DIP]의 분자 및 결정구조를 규명하였다. 이 결정의 분자식은 C23H31N2O·I, 결정계는 Monoclinic이며 공간군은 P21이다. 단위포 상수는 a =8.937(1) Å, b=19.522(2) Å, c=6.485(2) Å이며, β= 105.18(2)°, V=1091.9(6) Å3, T=293(2)K, Z=2, Dc=1.45 Mgm-3이다. 회절반점들의 세기는 Enarf-Nonius CAD-4 diffractometer로 얻었으며 Mo Katjs(λ=0.71073 Å)을 사용하였다. 분자구조는 직접법으로 개략적인 분자모델을 설정하고, Fo>4σ(Fo)인 4112개의 독립 회절 데이터에 대하여 최소자승법으로 정밀화하여 최종 신뢰도 값 R=5.23%인 최종적인 분자모형을 구하였다.