• 청정기술
• /
• 제29권4호
• /
• pp.262-271
• /
• 2023

전 세계적으로 폐플라스틱 발생에 따른 환경적 문제로 인해 이를 처리하기 위한 다양한 연구가 진행되고 있다. 이 중 폐플라스틱을 열분해하여 연료 및 원료 등으로 재활용하는 방법이 보편적이다. 본 연구에서는 '폐플라스틱 열분해유(WPPO)의 나프타 원료로 활용'을 목적으로 총 5종의 폐플라스틱 열분해유(WPPO)의 물성분석을 통해 나프타 원료로 사용이 가능한지 살펴봄과 동시에 넓은 비점범위로 인해 분리정제 기술 중 하나인 감압증류를 통해 light fraction과 heavy fraction으로 분획 및 GC-VUV로 paraffin, 올레핀 함량 및 기타 화합물 등의 구성성분을 나타내었다. 그 결과, WPPO의 원료, 분획에 상관없이 높은 올레핀 함량이 나타났고 방향족 및 paraffin 함량 등은 원료에 따라 차이가 발생하였고 산소 및 기타 화합물도 원료 및 분획별 차이가 큰 것으로 나타났다. 또한, light fraction은 나프타와 유사한 탄소분포를 나타내지만, heavy fraction은 탄소분포가 C₁₁ ~ C₁₄로 나타났다. 결론적으로, 폐플라스틱 열분해유의 나프타원료 활용을 위해서 추가 공정이나 원료 선별 등이 필요할 것으로 판단된다.

• 폴리머
• /
• 제38권4호
• /
• pp.496-501
• /
• 2014

폴리알파올레핀은 낮은 유동점, 높은 점도지수와 같은 물리화학적 특성이 기존의 광유보다 우수한 합성윤활유이다. 본 논문은 퍼옥사이드계 개시제를 이용하여 올레핀을 사용하지 않고 이소파라핀 분자간의 알킬레이션 반응을 통한 합성 윤활유 제조에 관한 새로운 경로를 제시한다. 평균 탄소수가 i-$C_{16}$, i-$C_{18}$, 그리고 i-$C_{23}$인 세가지 장쇄 이소파라핀의 알킬레이션과 i-$C_{18}$과 2-pentene의 알킬레이션을 di-tert butyl peroxide 라디칼 개시제를 사용하여 여러가지 반응조건에서 수행하여 단독 알킬레이션 반응 경로를 확인하였다. 세가지 유분으로 제조된 알킬레이트를 합성 윤활유로의 적용 가능성을 알아보기 위하여 동점도, 점도지수, 및 유동점을 조사하였다. i-$C_{16}$ 및 i-$C_{18}$ 유분으로 제조된 단독 알킬레이트는 극초고점도지수(>140)와 낮은 유동점(< $-30^{\circ}C$)을 보였다.

• 한국고분자학회지:고분자과학과기술
• /
• 제5권3호
• /
• pp.236-253
• /
• 1994

양이온형 $d^0\;Cp_2M(R)(L)^+$ 착물과 무염기 $Cp_2M(R)^+$ 착물은 $Cp_2M(R)_2$화합물로부터 쉽게 합성할 수 있다. 이들 친전자성 착물에서는 여러가지 리간드 교환반응, 삽입반응, ${\beta}$-H 제거반응 및 ${\sigma}$-결합 복분해반응이 일어날 수 있다. 일반적으로 $Cp2M(R)(L)^+$ 착물은 불포화도와 전하가 크기때문에 중성의 $Cp_2M(R)(X)$나 $Cp_2M(R)_2$보다 반응성이 크며 $d^0\;{Cp_2}^*M(R)^+$ (M=제 3족과 란탄계) 착물과 여러가지 반응에서 유사한 거동을 보인다. $Cp_2MX_2$를 기초로하여 합성된 Ziegler-Natta 촉매에 의한 올레핀 중합에서 활성점이 $Cp_2M(R)^+$ 양이온이라는 여러가지 직접적인 증거가 발표되었다. 분리가능한 $Cp_2M(R)(L)^+$ 착물은 올레핀중합에서 높은 활성을 보이며, 유기합성의 관점에서 흥미있는 C-C 재조합반응과 같은 다른 여러가지 반응이 일어날 수 있는 기회를 제공한다.

• Bulletin of the Korean Chemical Society
• /
• 제23권4호
• /
• pp.563-566
• /
• 2002

Copper complexes have been directly incorporated into cellulose acetate (CA) and the resulting light blue colored homogeneous films of 5-20 wt.% copper acetate complex concentrations are found to be thermally stable up to 200 $^{\circ}C$. The reaction chem istry of Cu in CA has been investigated by reacting them with small gas molecules such as CO, H2, D2, O2, NO, and olefins in the temperature range of 25-160 $^{\circ}C$, and various Cu-hydride, -carbonyl, -nitrosyl, and olefin species coordinated to Cu sites in CA are characterized by IR and UV/Vis spectroscopic study. The reduction of Cu(II) complexes by reacting with H2 gas at the described conditions results in the formation of Cu2O and copper metal nanoparticles in CA, and their sizes in 30-120 nm range are found to be controlled by adjusting metal complex concentration in CA and/or the reduction reaction conditions. These small copper metal particles show various catalytic reactivity in hydrogenation of olefins and CH3CN; CO oxidation; and NO reduction reactions under relatively mild conditions.

• Bulletin of the Korean Chemical Society
• /
• 제35권5호
• /
• pp.1403-1408
• /
• 2014

The cycloaddition reactions of the N-heterocyclic carbene boryl azide with methyl acrylate, butenone, and hexafluoropropene have been investigated theoretically. Solvent effects on these reactions have been explored by calculation that included a polarizable continuum model (PCM) for the solvent (C6H6). The title reaction could produce 4- and 5-substituted 1,2,3-triazolines, respectively. The reaction systems have the higher chemical reactivity with the low barriers and could be favored. Yet the smaller differences have been found to occur in energetics, and the cycloaddition reactions occur for s-trans conformations over s-cis conformations. The calculations indicated that the cycloaddition reaction of the alkenes have certain regioselectivity.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2010년도 춘계학술 발표회
• /
• pp.199-199
• /
• 2010

Polymeric membranes have been widely used to separate gas mixtures, such as $O_2/N_2,\;CO_2/CH_4,\;CO_2/N_2$, and olefin/paraffin. The permeation selectivity is the ratio between composition ratio at the permeate side and composition ratio at the feed side. In addition, the permeation selectivity is a product of solubility selectivity and diffusivity selectivity. We present a novel idea and describe its experimental result, which was achieved by preparing polymer gel films that included a room temperature ionic liquid (RTIL) in a polymer matrix. It is known that $CO_2$ can dissolve easily in imidazolium-based RTILs. We prepared polymer-ionic liquid gel films using an ionic liquid, 1-ethyl-3-methylimidazolium acetate ([emim] acetate, C-tri) and a host polymer, poly (vinyl acetate) (PVAc, Aldrich).

• Macromolecular Research
• /
• 제16권8호
• /
• pp.676-681
• /
• 2008

The $\pi$-complex membranes of poly(styrene-b-(ethylene-co-butylene)-b-styrene) (SEBS) of two silver salts of $AgBF_4$ and $AgCF_3SO_3$ were prepared and tested for the separation of the propylene/propane mixtures. The Fourier-transform infrared (FT-IR) spectra of these complexes showed that the silver salts were dissolved in SEBS up to a silver mole fraction of 0.14, due to $\pi$-complexation between the aromatic C=C bonds of styrene blocks and silver ions. Above this solubility limit, ion pairs and high-order ionic aggregates began to form, so that silver salts were distributed unselectively in both the EB and PS blocks. The domain size of the PS blocks was enlarged up to this critical concentration with increasing silver concentration without structural transitions, as confirmed by small angle x-ray scattering (SAXS). These structural properties of the SEBS/silver salt complexes may explain the lower separation properties for propylene/propane mixtures compared to poly(styrene-b-butadiene-b-styrene)(SBS)/silver salt complex membranes.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.523-526
• /
• 2006

The target of this work was the process development of demonstration plant to produce the high quailty alternative fuel oil by the pyrolysis of mixed plastic waste. In the first step of research, the bench-scale units of 70t/y and the pi lot plant of 360 t/v had been developed. Main research contents in this step were the process performance test of pilot plant ot 360ton/year and the development of demonstration plant of 3 000 t/y which was constructed at Korea R & D Company in Kimjae City. The process performance of pilot plant of 360 t/v showed components in PONA group appeared at between that of commercial gasoline and kerosene. On the other hand, HO product was mainly paraffin and olefin components and also appeared at upper temperature distribution range than commercial diesel. Gas product showed a high fraction of $C_3\;and\;C_4$ product like LPG composition, but also a high fraction of $CO_2$ and CO by probably a little leak of process.

• Journal of Magnetics
• /
• 제20권4호
• /
• pp.371-376
• /
• 2015

Magnetite nanoparticles were synthesized by adding excess ammonium hydroxide to a solution of iron (II) and (III) chlorides. The surfactants of oleic acid and Span 80 were applied in sequence to the magnetic particles as a combined stabilizer, and poly-${\alpha}$-olefin (PAO) 30 or 60 was used as the liquid base with a low or high viscosity, respectively. The ferrofluids were prepared with the concentrations of 200, 300, 400, and 500 mg/mL, and characterized by density, dispersion, magnetization, and viscosity. The density of the fluids increased proportionally to the concentration from 0.98 to 1.27 g/mL and 1.01 to 1.30 g/mL with PAO 30 base and PAO 60 base, and the dispersion stability was 77-95 and 81-74% for the PAO-30 and PAO-60-based fluids, respectively. The observed saturation magnetization values of the PAO-30 and PAO-60-based ferrofluids were 16 to 42 mT and 17 to 41 mT with the concentration increase in the range 200-500 mg/mL, respectively, depending upon the content of magnetic particles in the fluid. The viscosity variation of the PAO-30 and PAO-60-based ferrofluids in the temperature range $20-80^{\circ}C$ was the least with the concentrations of 400 and 300 mg/mL, respectively.

• Archives of Pharmacal Research
• /
• 제19권4호
• /
• pp.321-325
• /
• 1996

Aiming at the development of anticancer agents by modification of phenolic benzo[c]phenanthridine alkaloid, additional hydroxyl group was put on C10 position of fagaridine (1) by a biomimetic synthetic procedure to afford 10-hydroxyfagaridine (12). All of the synthetic intermediates were also screened in vitro antitumor activities against five different cell lines as well as 12. Among them the representative cytotoxic results are shown as follows; P-quinone (11) $[ED_50;(A549=0.22; {\mu}g/ml)$, $(HCT;15=0.21 {\mu}g/ml)$, fagaridine (1) $(HCT;15=0.41 {\mu}g/ml)$, olefin (6) $(HCT; 15=0.06 {\mu}g/ml)$, acetal (7) $(SKMEL-2=0.07 {\mu}g/ml)$, dihydrofagaridne (10) $(A549=0.38 {\mu}g/ml)$, 10-hydroxyfagaridine (12) $(A 549=0.45{\mu}g/mi)$. From these observation three main remarks can be drawn; (i) the iminium part of benzo[c]phenanthridine is not essential for showing acitvities, (ii) the additional hydroxyl group did not contribute to enhance the cytotoxicity, (iii) the 3-arylisoquinolin-1(2H)-one derivatives were found to display significant in vitro antitumor activity.