• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.6
• /
• pp.398-403
• /
• 2001

In this paper, effective ionization coefficient for 6H-SiC is determined. Analytical formulas for the parallel plane breakdown voltage of the 6H-SiC p＋n junction are derived by employing the ionization coefficients. The analytical breakdown voltages show good agreement with the numerical results of Dmitriev＇s［3］and the experimental results of Cree Research［9］over the doping range from 10$^{15}$ cm$^{-3}$ to 10$^{18}$ cm$^{-3}$.

• Korean Journal of Crystallography
• /
• v.1 no.1
• /
• pp.19-28
• /
• 1990

6H-SiC is a promising material (Eg=3.0eV) for blue light-emitting doide and high-temperature semiconducting device. In the experiment, single crystals of a-SiC have been grown by the sublimation method to fabricate blue light~emitting diode. During the growth of a-SiC single crystals, a temperature Vadient, yonh temperature and pressure ranges were kept 44℃/cm , 1800-1990℃ and 50-1000 mTorr, respectively. Single crystals obtained in Acheson furnace were used as seed crystals. Polarizing microscopy and back-reflection X-ray Laue diffraction showed that the a-SiC crystal was epitaxially and on the seed crytal. It was found by XRD analysis that when other growth conditions were the same, a-SiC was grown at the temperature above 1840℃ and 3C-SiC was gown at lower temperature or under low supersaturation of vapor. The carrier type. concentration and mobility were measured be hole(p-type), 7.6x1014cm-3 and 19cm2V-1sec-1, respectively, by van der Pauw method.

• Journal of the Korean Chemical Society
• /
• v.53 no.5
• /
• pp.530-535
• /
• 2009

Dicyclohexyl telluride was obtained in a high yield by the reaction of cyclohexyl bromide with NaTeH(prepared in situ) in an aqueous ethanolic solution. A series of new organotelluronium salts of the general formula ${(cyclo-C_6H_11)}_2Te(R)X$ (where R = $CH_3$, X = I (1); R = $C_2H_5$, X = Br(2); R = $C_2H_5$, X = I (3); R = C_3H_5$, X = Br (4)) were prepared by the reaction of ${(cyclo-C_6H_11)}_2Te$ with the corresponding alkyl halide. Reaction of 1 with NaBPh4 gave compound 5 ( i.e. R = CH3, X = BPh4 ‒) in 78% yield. Reaction of ${(cyclo-C_6H_11)}_2Te$ with benzyl bromide and 4-bromophenacyl bromide gave unexpectedly dibenzylcyclohexyltelluronium bromide (6) and bis(4-bromophenacyl)cyclohexyltelluronium bromide (7), respectively. Reaction of 6 with NaBPh4 gave the corresponding tetraphenylborate derivative (8) in high yield. $^1H$ NMR studies revealed that in $CDCl_3$solution compound 1 eliminated alkyl halide. Conductivity, IR, $^1H\;and\;^{13}C$ NMR and thermal data for the new compounds are presented and discussed.

• Korean Journal of Crystallography
• /
• v.13 no.2
• /
• pp.82-85
• /
• 2002

From the reaction of cis,cis,trans- [MoBr/sub 2/(CO)/sub 2/(PPh/sub 3/)/sub 2/］with 2,6-dimethylphenyl isocyanide, a molybdenum oxohaloisocyanide compound cis,fac-[Mo(O)Br/sub 2/,(CN-C/sub 6/H/sub 3/,-2,6-Me/sub 2/)sub 3/] (1) was iso-lated. Compound 1 was characterized by spectroscopy (/sup 1/H-NMR, /sup 13/C｛/sup 1/H｝-NMR, IR) and X-ray diffraction. Crystallographic data for 1: triclinic space group P(equation omitted), a=9.172(2) (equation omitted), b ＝ 11.550(3) (equation omitted), c ＝ 15.106(3) (equation omitted), α ＝ 100.44(2)°, β＝ 107.12(2)°, γ＝ 107.83(1)°, Z ＝ 2, R(wR/sub 2/) ＝ 0.0529(0.1344).

• Advances in materials Research
• /
• v.6 no.3
• /
• pp.303-316
• /
• 2017

In this article, novel olefin polymerization catalyst with lower cost and simple synthetic process were developed, $ArOTiCl_3$ complexes [$(2-OMeC_6H_4O)TiCl_3(C1)$, $(2,4-Me_2C_6H_3O)TiCl_3(C2)$, $TiCl_3(1,4-OC_6H_4O)TiCl_3(C3)$, $TiCl_3(1,4-OC_6H_2O-Me_2-2,5)$ $TiCl_3(C4)$] and corresponding $(ArO)_2TiCl_2$ complexes [$TiCl_2(OC_6H_4-OMe-2)_2(C5)$ and $TiCl_2(OC_6H_3-Me_2-2,6)_2(C6)$] have been synthesized by the reaction of $TiCl_4$ with phenol, all these complexes were well characterized with $^1H$ NMR, $^{13}C$ NMR, MASS and EA. When combined with methylaluminoxane (MAO), the $ArOTiCl_3/MAO$ system shows high activity for ethylene copolymerization with 1-octene and copolymer was obtained with broaden molecular weight distribution (MWD). The $^{13}C$ NMR result of polymer indicates that the 1-octene incorporation in polymer reached up to 8.29 mol%. The effects of polymerization temperature, concentration of polymerization monomer and polymerization time on the catalytic activity have been investigated.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.2
• /
• pp.589-596
• /
• 2012

In this paper, the reactive dynamics properties of the reactions Ba + $C_6H_5Br$ and Ba + m-$C_6H_4CH_3Br$ were studied by means of the quasi-classical trajectory method based on the London-Eyring-Polanyi-Sato potential energy surfaces. The vibrational distributions, reaction cross sections, rotational alignments of the products BaBr all were obtained. The peak values of the vibrational distributions are located at $\nu$ = 0 for the reactions Ba + $C_6H_5Br$ and Ba + m-$C_6H_4CH_3Br$ when the collision energies are 1.09 and 1.10 eV, respectively. The reaction cross sections increase with the increasing collision energy, which changes from 0.6 to 1.5 eV. The product rotational alignments deviate from -0.5 and firstly increase and then decrease while the collision energy is increasing, just like that of Heavy+Light-Light system.

• Korean Journal of Crystallography
• /
• v.12 no.3
• /
• pp.137-140
• /
• 2001

Compound PdCl₂(Phc≡N)₂(1) reacted with 2,6-diisopropylaniline to give trans-[Pd(NH₂-C/sub 6/-H₃-2, 6-i-Pr₂)₂Cl₂] (2). Compound 2 was characterized by spectroscopy (¹H-NMR, /sup 13/C-NMR, and IR) and X-ray diffraction. Crystallographic data for 2: monoclinic space group P2₁/n, a=13.532(3) Å, b=5.749(1) Å, c=17.880(4)Å, β=103.84(2)°, Z=2, R(wR₂)=0.0466(0.1226).

• Journal of Ginseng Research
• /
• v.25 no.3
• /
• pp.136-140
• /
• 2001

Effects of incubation temperature and pH on chlamydospore germination of Cylindrocarpon destrcutans (isolate CY-9802) causing root rot of Panax ginseng were studied. Germination rate of the chlamydospores on Czapek solution agar(CSA) was higher than on potato dextrose agar(PDA) at the incubation temperatures tested. The chlamydospores were able to be germinated at range of 5$\^{C}$ to 30$\^{C}$ after 48 hours incubation on CSA. Germination rate was 53.2∼6.27% at range of 15$\^{C}$ to 25$\^{C}$, and the optimum temperature was 20$\^{C}$, whereas they were very low at 30$\^{C}$ on PDA. Germination rate was 43.6% to 47.9% at range of 10$\^{C}$ to 20$\^{C}$, and the optimum temperature was 20$\^{C}$ as well. They were able to be germinated at pH of 5.2 to 8.1 on CSA and 5.2 to 7.2 on PDA. Optimum pHs for the germination on CSA and PDA were from 6.4 to 8.2 and from 5.2 to 6.0, respectively. Mycelial color of the fungus on CSA was pale brown at pH from 5.2 to 6.0 and white from pH 6.4 to 8.1, while it was typical dark brown ar range of pH 5.2 to 7.1 and brown at pH 7.2 on PDA after 21 days incubation.

• Journal of the Korean Chemical Society
• /
• v.55 no.2
• /
• pp.183-188
• /
• 2011

The electronic structure and properties of Ni$(C_6H_{4-n}F_n)(CO)_2$ ($C_6H_4$=benzyne, n=1-4) complexes have been investigated using hybrid density functional B3LYP theory. Both aromatic natures and nucleus independent chemical shift (NICS) of the benzyne rings have been analyzed. Among mono-, di-, and tri-fluorinated complexes, 3-F, 3,6-F, and 4-H are the most stable isomers, respectively. NICS values calculated at the several points above the ring centers are consistent with those based on the relative energies of the complexes. The atoms in molecules (AIM) analysis indicates that Ni-C bond distance is well correlated with the electron density of a ring critical point (${\rho}_{rcp}$) in all species.

• Bulletin of the Korean Chemical Society
• /
• v.14 no.1
• /
• pp.113-117
• /
• 1993

Good yield synthetic routes for the production of new B-alkyl-dithiaborane clusters are reported. The syntheses of the B-alkyl-dithiaboranes are based on the use of Fischer-type carbene reagents to activate the B-H bonds of dithiaborane for alkyl-addition reactions and are the first examples of transition-mediated reactions of dithiaborane to be reported. Thus, reactions employing arachno-$S_2B_7H_8$- and $(CO)_5M{C(R_1)R_2}$ (M = Cr, W; $R_1 = CH_3,\;C_6H_5;\; R_2 = OCH_3,\;SC_6H_5)$ were found to yield the intermidiate anions I, $[(CO)_5M{C(R_1)R_2S_2B_7H_8}]^-$, which upon protonation gave the corresponding neutral, air-sensitive cluster arachno-4-$RCH_2-6,8-S_2B_7H_8(R=CH_3,\;IIa;\;C_6H_5,\;IIb)$ range from 30 to 35% yield. Complexes IIa and IIb are isoelectronic with arachno-6,8-$S_2B_7H_9$ and, on the basis of the spectroscopic data, are proposed to adopt a similar arachno cage geometry in which an $RCH_2$ units are substituted to 4 position boron atom of the arachno-6,8-$S_2B_7H_9$.