• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.11a
• /
• pp.133-136
• /
• 2007

This study investigates mechanical properties of the concrete using fine particle cement which is manufactured by the pulverizing process. The variable factors are 3 types of W/C such as 40, 50, and 60%, 3 types of curing temperature such as 5, 20, and $35^{\circ}C$, and 5types of the replacement of the fine particle cement such as 0, 25, 50, 75, and 100%. The unit water content, S/a and amount of the SP and AE agents to secure the slump and air content is gradually increased in accordance with amount of replacement. It can be confirmed that the delay of the setting time depending on FC content is decreased corresponding to FC content, so the effect of the acceleration to the setting time is expected. The compressive strength corresponding to FC content is proportionally increased, and the growth is confirmed about $30{\sim}40%$ at a day in 50% of FC contents. However, the increase of the strength is gradually decreased in accordance with increasing age.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 2001.11a
• /
• pp.109-109
• /
• 2001

The present study was done to investigate the relationship between Kupffer cells and alteration of cytochrome P-450 (CYP)-dependent drug metabolizing enzyme activities during polymicrobial sepsis. Male rats were subjected to polymicrobial sepsis by cecal ligation and puncture (CLP) followed by fluid resuscitation. The gadolinium chloride (GdC1$_3$, 10 mg/kg), blocker of Kupffer cells, was pretreated intravenously at 48 h and 24 h prior to the induction of CLP. All assay parameters were determined at 24 h after CLP or sham operation. In CLP-treated rats, the mortality rate of animals increased to 50% and serum alanine (ALT) and aspartate aminotransferase (AST) levels also significantly elevated. However, this increase was not suppressed by GdC1$_3$ pretreatment. Microsomal lipid peroxidation markedly increased after CLP operation. This increase was significantly attenuated by pretreatment. Total cytochrome P-450 content and NADPH-cytochrome P-450 reductase activity were not changed after CLP operation, but GdC1$_3$pretreatment reduced total cytochrome P-450 content, The hepatic microsomal CYP 1A1, 1A2, 2Bl and 2El activities in CLP-induced rats were also not significantly different from sham-operated rats. However, GdC1$_3$pretreatment showed a moderate increase in CYP1A1 and 1A2 activities. Our findings suggest that Kupffer cells may be partly responsible for producing hepatocellular dysfunction during sepsis.

• Applied Chemistry for Engineering
• /
• v.19 no.4
• /
• pp.421-426
• /
• 2008

Multi-walled carbon nanotube/polystyrene (MWCNT/PS) composites with various MWCNT contents were prepared by using a solution process with an aid of surfactant. Particularly, PS's with 3 different molecular weights (${\bar{M}}_n$ = 101500 g/mole for PS-1, ${\bar{M}}_n$ = 89900 g/mole for PS-2, and ${\bar{M}}_n$ = 85000 g/mole for PS-3) were used in this study. Thermal behavior of these composites was examined by using an oscillator rheometer at $210^{\circ}C$ and $180^{\circ}C$, of above and below the critical flow temperature ($T_{cf}{\sim}195^{\circ}C$) of PS matrix, respectively. The storage and loss modulus, and the complex viscosity of these composites increased with increasing MWCNT content at both temperatures. Largest increases in the frequency-dependent moduli and complex viscosity were observed between 2 wt% and 5 wt% of MWCNTs at $210^{\circ}C$ and $180^{\circ}C$. Only the composite at $210^{\circ}C$ showed the rheological phase transition from a viscous-dominant to an elastic-dominant behavior of the composites at a certain MWCNT content. The MWCNT content at the rheological phase transition of MWCNT/PS composites generally increased with decreasing molecular weight of PS, and was measured to be 3.5 wt% for MWCNT/PS-1, 3.2 wt% for MWCNT/PS-2, and 3.0 wt% for MWCNT/PS-3 composites.

• International Journal of Contents
• /
• v.6 no.3
• /
• pp.10-14
• /
• 2010

Researchers in Korea and elsewhere have carried out a wide variety of important research activities in their respective fields, producing valuable research results. For such diverse research results to be shared and exchanged among researchers working in the same discipline and research subject there needs to be a community environment based on free utilization of information. Against this backdrop, this study seeks to classify and reprocess the reference/factual content owned by the KISTI (Korea Institute of Science and Technology Information), a state-run distributor of information on science and technology, by the different research subjects. It also seeks to develop and provide a community model based on the concepts of open archiving and open access for the researchers specialized in the related fields of research. This community model is developed focusing on the research results from the field of bioscience, where the most extensive studies are currently being conducted. To develop the community model, this study: (a) surveys the current status of the content owned by KISTI; (b) analyzes the patterns and characteristics of biological scientific content among the KISTI-owned content; and (c) designs a web platform where researchers can freely upload/download research results.

• Korean Journal of Metals and Materials
• /
• v.49 no.2
• /
• pp.153-160
• /
• 2011

The AISI 216L stainless steel with a composition of Fe-16Cr-6Ni-6Mn-1.7Mo (wt.%) was oxidized at $700{\sim}900^{\circ}C$ in air for 100 h. At $700^{\circ}C$, a thin $Mn_{1.5}Cr_{1.5}O_4$ oxide layer with a thickness of $0.4{\mu}m$ formed. At $800^{\circ}C$, an outer thin $Fe_2O_3$ oxide layer and a thick inner $FeCr_2O_4$ oxide layer with a total thickness of $30{\mu}m$ formed. The non-adherent scale formed at $800^{\circ}C$ was susceptible to cracking. At $900^{\circ}C$, an outer thin $Fe_2O_3$ oxide layer and a thick inner $Mn_{1.5}Cr_{1.5}O_4$ oxide layer formed, whose total thickness was $10{\sim}15{\mu}m$. The scales formed at $900^{\circ}C$ were non-adherent and susceptible to cracking. 216 L stainless steel oxidized faster than 316 L stainless steel, owing to the increment of the Mn content and the decrement of Ni content.

• Korean Journal of Soil Science and Fertilizer
• /
• v.29 no.4
• /
• pp.378-384
• /
• 1996

This study was conducted to investigate the influence of root zone temperature on the growth of shoot and root and the mineral contents in leaf of 'Fuji/M26' apple tree. Shoot growth and enlargement of trunk girth increased linearly with increasing root zone temperature. Fresh and dry weight of root reached maximum at $35^{\circ}C$. Water content of root increased with rising root zone temperature. The chlorophyll content of leaves showed insignificant difference with root zone temperature. Leaf water potential was high at $35^{\circ}C$ at 15 day after treatment but 60 day after treatment this was decreased. The nitrogen content of the leaves was not different by root zone temperature whereas the phosphorus content of the leaves was increased at $30^{\circ}C$ in 1993 and at $25^{\circ}C$ in 1994. The potassium content of the leaves reached a maximum at $30^{\circ}C$ in 1993 and $25^{\circ}C$ in 1994. In 1994 the calcium content of the leaves was increased with rising root zone temperature and with lengthening duration of treatment but no such differences were found in 1993. The magnesium content of the leaves was highest at $25^{\circ}C$ in 1993 and at $20^{\circ}C$ in 1994. The nitrogen and potassium content of the roots were increased linearly with root zone temperature in 1993 and 1994 and the magnesium and phosphorus content of the roots were high at $35^{\circ}C$ in 1994 but no such differences were found in the calcium content of the roots.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.8
• /
• pp.570-576
• /
• 1999

$LaCrO_3$-dispersed Cr alloys for metallic interconnector of solid oxide fuel cell have been studied as function of $LaCrO_3$ content in the range of 5 to 25 vol.% in order to examine the electric conductivity, the oxidation property and the thermal expansion behavior of these alloys. The $LaCrO_3$-dispersed Cr alloys showed high electrical conductivities of $3~5\times10^4$ S/cm at room temperature, and as the $LaCrO_3$content increased the conductivity decreased slightly. During the cyclic oxidation test at $1100^{\circ}C$, the weight change of the Cr alloys decreased with increasing number of oxidation cycle except first cycle, which is attributed to the vaporization of the oxide scale. More addition of the $LaCrO_3$ content reduced also the weight change of the Cr alloys. These mean that the oxide scale formed at the surface of the Cr alloy becomes stable with increasing number of oxidation cycle and$LaCrO_3$ content. The measured thermal expansion of the Cr alloy was well fitted to that of 8 mol% $Y_2O_3$-stabilized $ZrO_2$ electrolyte. These results demonstrate that $LaCrO_3$-dispersed Cr alloy is a useful material for metallic interconnector of solid oxide fuel cell.

• Journal of the Korean Ceramic Society
• /
• v.29 no.7
• /
• pp.577-585
• /
• 1992

TiB2 and TiC were prepared from the mixture of metal titanium, boron and graphite powders in Argon atmosphere by Self-propagating High-temperature Synthesis method. The sintered properties of TiB2-TiC composite as a function of TiC content and sintering temperature were investigated in TiB2 matrix. The sintered properties were the most excellent at 10 wt% TiC content in TiB2-TiC composite. The relative density, M.O.R strength, hardness and fracture toughness of TiB2-10 wt% TiC composite sintered at 190$0^{\circ}C$ for 90 min by hot-pressing under the pressure of 30 MPa were 98.6%, 634 MPa, 2128.1 kg/$\textrm{mm}^2$ and 4.09 MN/m3/2, respectively.

• Korean Journal of Food Science and Technology
• /
• v.47 no.2
• /
• pp.158-163
• /
• 2015

Fustin comprised >98 and 73.0-86.7% of the total flavonoid content in the bark, and the stems and lignum of Rhus verniciflua, respectively. The butein, fisetin, and sulfuretin content varied between 0.31-2.17, 0.27-3.32, and 0.15-0.80 mg/g on a dry weight basis, respectively, in different parts of Rhus verniciflua. The urushiol content was 5.09-6.29, 55.05-56.30, and 0.38-0.39 mg/100 g on a dry weight basis in the stems, bark, and lignum, respectively. This showed that the bark of the tree had the highest urushiol content. C15:3 (pentadecatrienyl catechol), C15:1 (pentadecenyl catechol), and C15:2 (pentadecadienyl catechol) comprised 63, 33-35, and 2-3% of urushiol congeners in the tree bark, respectively.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.648-649
• /
• 2006

The dry-milling technique was used for mixing and crushing oxides and graphite powders. The ratio of ball-to-powder was 30:1 and argon gas was filled in jar. The excess carbon was $10{\sim}20wt%$ of the stoichiometric amount. The dry-milling was carried for 20 hours. The mixed powders were reduced and carburized at $900{\sim}980^{\circ}C$ for 3 hours flowing Ar gas in tube furnace. The dry-milled powders showed the wide diffraction patterns of X-ray. The reactions of reduction and carburization were completed in 3 hours at $980^{\circ}C$. After the reactions, the mean size of WC particles was about 200 nm. The content of free carbon in WC/Co mixed powders was less as the reaction temperature increased.