• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1295-1297
• /
• 1996

CCITT G.721, G.723 standard ADPCM algorithm is implemented by using TI's fixed point DSP start kit (DSK). ADPCM can be implemented on a various rates, such as 16K, 24K, 32K and 40K. The ADPCM is sample based compression technique and its complexity is not so high as the other speech compression techniques such as CELP, VSELP and GSM, etc. ADPCM is widely applicable to most of the low cost speech compression application and they are tapeless answering machine, simultaneous voice and fax modem, digital phone, etc. TMS320C50 DSP is a low cost fixed point DSP chip and C50 DSK system has an AIC (analog interface chip) which operates as a single chip A/D and D/A converter with 14 bit resolution, C50 DSP chip with on-chip memory of 10K and RS232C interface module. ADPCM C code is compiled by TI C50 C-compiler and implemented on the DSK on-chip memory. Speech signal input is converted into 14 bit linear PCM data and encoded into ADPCM data and the data is sent to PC through RS232C. The ADPCM data on PC is received by the DSK through RS232C and then decoded to generate the 14 bit linear PCM data and converted into the speech signal. The DSK system has audio in/out jack and we can input and out the speech signal.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.467-470
• /
• 2011

In this study, two different kind of impeller, commercial hand blender and manual type were used to investigate the most effective mixing method for simulant gel propellant. Ionized Water, Carbopol 941 and NaOH were used to produce the simulant gel for temperature of $25^{\circ}C$ and $50^{\circ}C$. The amount of bubbles produced during mixing of simulant gel at $50^{\circ}C$ were higher than that of simulant gel at $25^{\circ}C$. After 24 hours, bubbles of simulant gel made at $50^{\circ}C$ disappeared rapidly with respect to the bubbles of gel made at $25^{\circ}C$. Bubbles from blender did show notable amount even after 24 hours. Among mixing type, it was found that the pitched paddle impeller was the best candidate for the production of simulant gel.

• Korean Journal of Food Science and Technology
• /
• v.37 no.3
• /
• pp.372-376
• /
• 2005

Respiratory characteristics and quality of Fuji apple were investigated at critical conditions for dipping treatment in mild hot water ($40-65^^{\circ}C$) to extend freshness. Dipping treatment conditions under which no damages occurred in peel and flesh of apples stored at $0^{\circ}C$ for 1 month after treatment were: 180 min at $40^{\circ}C$, 60 min at $45^{\circ}C$, 45 min at $50^{\circ}C$, 3 min at $55^{\circ}C$, 1 min at $60^{\circ}C$, and 20 sec at $65^{\circ}C$. Internal carbon dioxide concentrations of apples drastically increased immediately after treatments at 40, 45, and $50^{\circ}C$, then decreased to normal level 1 day after treatment at $0^{\circ}C$. Although internal oxygen concentration of apples showed reversed trend to internal carbon dioxide, no significant differences were observed in concentrations of carbon dioxide and oxygen during storage after treatment of apples at 55, 60, and $65^{\circ}C$. Concentration of internal ethylene of apples treated at 40, 45, and $50^{\circ}C$ increased, similarly to that of carbon dioxide upon heat treatment, then, during storage, decreased to below levels of control and apples treated at 55, 60, and $65^{\circ}C$. Firmness of apples treated at 45 and $50^{\circ}C$ were 6.42 and 10.53% higher than that of control at $0^{\circ}C$ after 7 days after treatment.

• Composites Research
• /
• v.30 no.1
• /
• pp.71-76
• /
• 2017

The purpose of this study was to predict the long-term performance using the interlaminar shear strength of carbon fiber/epoxy composites exposed to environmental factors. Interlaminar shear specimens, manufactured by the filament winding method, were exposed to the conditions of drying at $50^{\circ}C$, $70^{\circ}C$, and $100^{\circ}C$ and of immersion at $25^{\circ}C$, $50^{\circ}C$, and $70^{\circ}C$ for up to 3000 hours, respectively. According to the results, the interlaminar shear strength did not vary significantly with the exposure time for the drying at $50^{\circ}C$ and $70^{\circ}C$, but it increased somewhat for the drying at $100^{\circ}C$ due to the post curing as the exposure time increased. The interlaminar shear strength of the specimens exposed to the immersion at $25^{\circ}C$ did not change significantly at the beginning of exposure, but it decreased with the exposure time and the degree of decrease increased as the environmental temperature increased. The linear regression equations for the environmental temperatures were obtained from the interlaminar shear strength of the specimens exposed to the immersion for up to 3000 hours. Using these linear regression equations, the interlaminar shear strength was estimated to be within 5.5% of the measured value at $25^{\circ}C$ and $50^{\circ}C$, and 2.3% of the measured value at $70^{\circ}C$. Therefore, the proposed performance prediction procedures can predict well the long-term interlaminar shear strength of carbon fiber/epoxy composites exposed to environmental factors.

• Horticultural Science & Technology
• /
• v.18 no.3
• /
• pp.321-326
• /
• 2000

To compare germinability of primed seeds with that of water imbibed and nonprimed seeds at different temperatures, percent germination, number of days to attain 50% of the final germination percentage (T50) and mean number of days to germination (MDG) were evaluated at various temperatures ranged from $10^{\circ}C$ to $35^{\circ}C$. Primed carrot seeds in -0.50 MPa PEG 8000 showed higher percent germination at $10^{\circ}C$ or $35^{\circ}C$. Reductions in T50 and MDG values were observed at all germination temperatures when primed with the PEG. The PEG combined with 100 mM $K_3PO_4$ was not as effective as the PEG alone in improving the germinability of carrot seeds. Nonprimed lettuce seeds germinated only 2% at $30^{\circ}C$ or $35^{\circ}C$. However, priming with 50 mM $K_3PO_4$ increased germination to 40% at $30^{\circ}C$ and to 21% at $35^{\circ}C$. In contrast to the single treatment of 50mM $K_3PO_4$, priming lettuce seeds in a mixture of 50mM $K_3PO_4$ and 200 mM $KH_2PO_4$ resulted in a lower percentage of germination, but a significant greater reduction of T50 and MDG. Percent germination was increased when 200 mM $KH_2PO_4$-primed onion seeds and 100 mM $Ca(NO_3)_2$-primed Welsh onion seeds were germinated at $10^{\circ}C$ or $35^{\circ}C$. Combined treatments with $Ca(NO_3)_2$ for onion and with $KH_2PO_4$ for Welsh onion seeds did not improve percent germination, but they significantly reduced T50 and MDG.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.4
• /
• pp.505-511
• /
• 2013

To investigate the potential use of makgeolli by-products as cosmetic materials, their phenolic and kojic acid contents, antioxidant activity, whitening effect, and anti-wrinkle activity were evaluated. Extracts were obtained with five different solvents (containing 0, 25, 50, 75, and 100% ethanol) from nuruk lees (NL), rice lees (RL), raw makgeolli (RM), and commercial makgeolli (CM) at 20 and $50^{\circ}C$. NL and CM extracts prepared with 75% ethanol had the highest phenolic contents (13.26 and 16.66 mg gallic acid equivalents/g, respectively) at 20 and $50^{\circ}C$, respectively. The highest kojic acid content was found in NL extracts with 0% ethanol at $20^{\circ}C$, while kojic acid was not detected in extracts prepared at $50^{\circ}C$. NL and RL extracts at $20^{\circ}C$ showed significant antioxidant activity. Whitening effects, determined by tyrosinase inhibitory activity, were highest for the NL extract prepared with 75% ethanol at $50^{\circ}C$. Noticeable anti-wrinkling effects, estimated by elastase inhibition activity, were also found in NL and RL extracts. These results suggest that makgeolli by-products could be valuable cosmetic materials with antioxidant, whitening, and anti-wrinkle activities.

• BMB Reports
• /
• v.36 no.5
• /
• pp.499-504
• /
• 2003

There has been increasing interest in studying the various effects of organophosphate insecticides in humans and experimental animals. Only a few data are available on the effect of the organophosphate insecticide, diazinon, on lipid metabolism. The aim of this study was to evaluate the effect of diazinon on plasma lipid constituents in mammalian animals. The plasma levels of total cholesterol (TC), high-density lipoprotein cholesterol (HDL-C), low-density lipoprotein cholesterol (LDL-C), triglycerides (TG), and phospholipids (PL) were measured in albino rats that were orally treated with a single dose of diazinon at a level of $LD_{50}$ or with repeated daily doses at the levels of $\frac{1}{2}$, $\frac{1}{8}$, and $\frac{1}{32}$ $LD_{50}$ for 2, 8, and 32 days, respectively. After a 24 h post-treatment with a single $LD_{50}$ dose of diazinon, TC was not significantly changed, the HDL-C and PL levels were significantly decreased, but the LDL-C and TG levels were significantly increased. Separate daily oral administrations of diazinon at $\frac{1}{2}$ $LD_{50}$, $\frac{1}{8}$ $LD_{50}$, and $\frac{1}{32}$ $LD_{50}$ doses resulted in a significant decrease in HDL-C and PL, with no significant change in TG. The LDL-C levels were significantly increased and TC showed no significant change with $\frac{1}{2}$ $LD_{50}$ and $\frac{1}{32}$$LD_{50}$ doses of diazinon, whereas a significant decrease in the levels of TC, HDL-C, as well as LDL-C, was observed with the $\frac{1}{8}$ $LD_{50}$ dose. These data suggest that diazinon may interfere with lipid metabolism in mammals.

• KSBB Journal
• /
• v.5 no.4
• /
• pp.341-345
• /
• 1990

The composition of triglyceride in the oil of walnut and pine-nut were analysed quantitatively by Tri-analysis column of HPLC. The results were as follows: 1. The compositions of triglyceride of pine-nut oil were $C_{52}=31.55%,\;C_{44}=20.72%,\;C_{54}=17.52%,\;C_{34}=15.24%,\;C_{56}=12.50%$ in order, respectively. 2. The compositions of triglyceride of walnut oil were $C_{44}=38.66%,\;C_{52}=29.47%,\;C_{54}=16.53%,\;C_{34}=11.12%,\;C_{50}=1.51%$ in order, respectively.

• Journal of the Korean Ceramic Society
• /
• v.36 no.9
• /
• pp.901-908
• /
• 1999

Effects of LPMOCVD process parameters on the properties of TiO2 thin film were investigated. Depositions were made in the range of temperature 300-67$0^{\circ}C$ with various TTIP(Titanium Tetraisopropoxide) concentrations by contrlling bubbler temperature(40-8$0^{\circ}C$) and/or flow rate(30-90 sccm). Post annealing treatments were carried out at 500-80$0^{\circ}C$ range in the air. Films deposited at 40$0^{\circ}C$ have denser morphology than those of films deposited at 50$0^{\circ}C$ and $600^{\circ}C$ due to slower deposition rate. Bubbler temperature can affect on the deposition rate in mass transfer controlled regime such as 50$0^{\circ}C$ or higher but not below 50$0^{\circ}C$ where surface reaction rate becomes important. On the contrary for films deposited above 50$0^{\circ}C$ flow rate can raise deposition rate but eventually saturate it at the 50 sccm and above due to retarded adhesion of decomposed species. But for films deposited at 40$0^{\circ}C$ deposition rate increases stadily with flow rate. As the film becomes more porous A(200) texture can not be developed and AnataselongrightarrowRutile transition kinetics increases.

• Proceedings of the Korean Nutrition Society Conference
• /
• 2000.11a
• /
• pp.56-56
• /
• 2000

본 연구는 철분결핍과 caffeine섭취가 흰쥐의 혈당과 과산화에 미치는 영향을 알아보기 위해서 수행되었다. 생후 2주된 48마리의 Sprague-Dawley 수컷 흰쥐를 철분과 caffeine의 첨가 수준에 따라 6군으로 나누어 4주간 사육하였다(C0F0 : caffeine 0%, Fe 5 ppm diet, C1F0 : caffeine 1%, Fe 5 ppm diet, C4F0 : caffeine 4%, Fe 5 ppm diet, C0F1 : caffeine 0%, Fe 50 ppm diet, C1F1 : caffeine 0%, Fe 50 ppm diet, C4F1 : caffeine 0%, Fe 50 ppm diet).(중략)