• Journal of the Korean Society for Heat Treatment
• /
• v.5 no.1
• /
• pp.23-31
• /
• 1992

It is investigated that Fe-C-N compound layer, defusion layer, and induction hardened layer produced by nitrocarburizing blend heat treatment in austenitic temperature with high frequency induction heating of mild steel specimen sprayed sursulf salt-bath. As the temperature of blend-heat treatment got increased, the thickness and hardness of compound layer and diffusion layer were increased. Compound layer(max. $35{\mu}m$), diffusion layer (max. 2.5mm) and induction hardened layer were gained in the shortest time 10 sec and in the case of $1000^{\circ}C$ total hardness depth of those was about 3.5mm. When the blend-heat treated specimen was reheated, maximum hardness of compound layer was dropped more than that of the reheated compound layer after sursulf treated, whereas hardness of diffusion layer was increased.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1887-1891
• /
• 2008

In this paper, we dealt with a partial discharge (PD) measurement method that has been accepted as an effective and non-destructive technique to estimate insulation performance of low-voltage induction motors. The PD measurement system consists of a coupling network, a low noise amplifier, and associated electronics. A shielded box was used to reduce environmental noise. Frequency characteristic of the coupling network was estimated by a sinusoidal signal input, and the low cut-off frequency of the coupling network was 1 MHz (-3 dB). Also, we carried out a calibration test for the PD measurement system. Sensitivity of the system was of 84 m$V_{max}$/pC between stator winding and enclosure. In application test on a low-voltage three phase induction motor (5 HP), we could detect 88 pC at AC 800 $V_{max}$.

• Journal of Korean Ophthalmic Optics Society
• /
• v.5 no.2
• /
• pp.151-155
• /
• 2000

We calculated a refractive index of the lens surface by measuring a spectral reflectance for a tinted time on manufacturing of the color lens. The longer a tinted time, the larger a reflectance and reflective index. The refractive index increased for a time up to the colorant's saturation state on the lens surface. The refractive index's change curve of blue color lens for a time depended on the Boltzmann growth curve. then we obtained the parameter's values of $n_{min}=1.482$, $n_{max}=1.497$, $t_c=11.53$ and $d_0=2.287$.

• KSBB Journal
• /
• v.19 no.2
• /
• pp.143-147
• /
• 2004

Biodegradation of dimethyl sulfide (DMS) was studied in a batch culture using Gordonia sihwaniensis PKL-1 isolated from a compost biofilter after 100 days of operation for the removal of volatile organic compounds. Optimal pH and temperature for the removal of DMS were 7 and $25^{\circ}C$, respectively. The Michaelis-Menten kinetic constants for DMS removal, $\upsilon_{max}$ and $K_s$, were 0.0016 mg/(mg-protein)ㆍhr, and 8.05 mg/L, respectively.

• Journal of the Optical Society of Korea
• /
• v.6 no.3
• /
• pp.83-86
• /
• 2002

Nanoscopic emission from periodic nano-hole arrays in thick metal films is studied experimentally. The experiments give direct evidence for SP excitations in such structures. We show that the symmetry of the emission is governed by polarization and its shape is defined the interference of SP waves of different diffraction orders. Near-Held pattern analysis combined with the far-Held reflection and transmission measurements suggests that the SP eigenmodes of these arrays may be understood as those of ionic plasmon molecules.

• Communications of the Korean Mathematical Society
• /
• v.30 no.4
• /
• pp.385-402
• /
• 2015

In this paper we study the (good) semi-prime closure operations on ideals of a BCK-algebra, lower BCK-semilattice, Noetherian BCK-algebra and meet quotient ideal and then we give several theorems that make different (good) semi-prime closure operations. Moreover by given some examples we show that the given different notions are independent together, for instance there is a semi-prime closure operation, which is not a good semi-prime. Finally by given the notion of "$c_f$-Max X", we prove that every member of "$c_f$-Max X" is a prime ideal. Also we conclude some more related results.

• Bulletin of the Korean Mathematical Society
• /
• v.61 no.1
• /
• pp.229-246
• /
• 2024

We consider the delay differential equations $$b(z)w(z+1)+c(z)w(z-1)+a(z)\frac{w'(z)}{w^k(z)}=\frac{P(z, w(z))}{Q(z, w(z))}$$, where k ∈ {1, 2}, a(z), b(z) ≢ 0, c(z) ≢ 0 are rational functions, and P(z, w(z)) and Q(z, w(z)) are polynomials in w(z) with rational coefficients satisfying certain natural conditions regarding their roots. It is shown that if this equation has a non-rational meromorphic solution w with hyper-order ρ2(w) < 1, then either deg_w(P) = deg_w(Q) + 1 ≤ 3 or max{deg_w(P), deg_w(Q)} ≤ 1. In addition, it is shown that in the case max{deg_w(P), deg_w(Q)} = 0 the equations above can have such a solution, with an additional zero density requirement, only if the coefficients of the equation satisfy certain strict conditions.

• Microbiology and Biotechnology Letters
• /
• v.33 no.3
• /
• pp.215-221
• /
• 2005

It was characterized the hexane biodegradation and mineralization using a hexane-degrading consortium, and analyzed its bacterial community structure by 16S rDNA PCR-DGGE (denaturing gradient gel electrophoresis). The specific growth rate (${\mu}_{max}$) of the hexane-degrading consortium was 0.2 $h^{-1}$ in mineral salt medium supplemented with hexane as a sole carbon source. The maximum degradation rate ($V_{max}$) and saturation constant ($K_{s}$) of hexane of the consortium are 460 ${\mu}mol{\cdot}g-DCW^{-1}{\cdot}h^{-1}$ and 25.87 mM, respectively. In addition, this consortium could mineralize $49.1{\%}$ of $^{14}C$-hexane to $^{14}CO_2$, and $43.6{\%}$ of $^{14}C$-hexane) was used for the growth of biomass. The clones isolated from the DGGE bands were closely related to the bacteria which were capable of degrading pollutants such as oil, biphenyl, PCE, and waste gases. The hexane-degrading consortium obtained in this study can be applied for the biological treatment of hexane.

• Journal of Life Science
• /
• v.34 no.3
• /
• pp.160-169
• /
• 2024

In this study, Abies nephrolepis MAX. was divided into A. nephrolepis MAX. stem (AS) extract and A. nephrolepis MAX. leaf (AL) extract. Their anti-inflammatory abilities and applicability as cosmetic materials were determined. Tests of the cell survival rate measured using RAW 264.7 cells and extracts of AS and AL showed 97.8% and 95.6% cell viability at a 500 ㎍/ml concentration. To determine anti-inflammatory activity, we examined the inhibitory effects on the production of LPS-induced NO in RAW 264.7 cells by Griess assay. The results showed that the AS and AL extracts presented a concentration-dependent inhibition of NO production. The protein expression inhibitory effects of AS and AL extracts were measured by western blot at 25, 50, and 100 ㎍/ml concentrations. β-actin was used as a positive control. The results of western blot of extracts from AS showed that the expression inhibition rate of the iNOS protein was decreased by 50.1% at the 100 ㎍/ml concentration. Additionally, the results of western blot of AL extracts showed that the expression inhibition rate of COX-2 and iNOS protein was decreased by 66% and 8.2% at the 100 ㎍/ml concentration. The mRNA inhibitory effect was measured by RT-PCR at 25, 50, and 100 ㎍/ml concentrations. GAPDH was used as a positive control. Consequently, the iNOS mRNA expression effect by RT-PCR of AS extract demonstrated by RT-PCR decreased by 27.9% at the 100 ㎍/ml concentration, and the iNOS and IL-6 mRNA expression effect of AL extract measured by RT-PCR decreased by 48.6% and 48.7% at the 100 ㎍/ml concentration.

• Microbiology and Biotechnology Letters
• /
• v.20 no.5
• /
• pp.505-510
• /
• 1992

An endo-$\beta$-1,4-glucanase gene of Clostridium thermocellum was cloned in Escherichia coli and was considered as a novel gene by comparison with the restriction patterns of the C. thermocellum cellulase genes so far reported. The endoglucanase from recombinant E. coli was purified by column chromatography after heat treatment. The purified enzyme was a monomer having molecular weight of 40,000. The enzyme hydrolyzed CMC to glucose and cello-oligosaccharides at :naximum activities at pH 5.0 and $65^{\circ}C$. One of the endproducts, glucose, showed no inhibitory effect on the enzyme activity, while the other endproduct, cellobiose, inhibited slightly. The values of $K_{m}$ and $V_{max}$ of the enzyme for CMC were 0.39% (w/v) and 268 Ulmg protein, respectively.