• 한국세라믹학회지
• /
• 제45권2호
• /
• pp.112-118
• /
• 2008

To prepare the high-capacity cathode material with improved electrochemical performances, nanoparticles of $C0_3(PO_4)_2$ were coated on the powder surface of $Li[Co_{0.1}Ni_{0.15}Li_{0.2}Mn_{0.55}]O_2$, which was already synthesized by simple combustion method. The coated powders after the heat treatment at >$700^{\circ}C$ surely showed well-structured crystalline property with nanoscale surface coating layer, which was consisted of $LiCOPO_4$ phase formed from the reaction bwtween $CO_3(PO_4)_2$ and lithium impurities. In addition, cycle performance was particularly improved by the $CO_3(PO_4)_2$-coating for the cathode material for lithium rechargeable batteries.

• Applied Biological Chemistry
• /
• 제7권
• /
• pp.45-52
• /
• 1966

This study was carried out to determine how the water soluble, the available $P_2O_5$ and urea-N would change in the course of time, when the mixtures of calcium superphosphate and urea with lime for fertilizer which occurred in Korea and largely contained calcium carbonate were made. Three kinds of materials, i. e., calcium superphosphate, urea and lime for fertilizer were used in this study. Three kinds of mixed fertilizer, i. e., A, B and C were made up by mixing these materials to satisfy the following formula. $$1)\;Ca(H_2PO_4)_2+CaCO_3+CO(NH_2)_2{\rightarrow}$$$$Ca_2H_2(PO_4)+H_2CO_3+NH_3$$ $$2)\;Ca(H_2PO_4)_2+CaCO_3+CO(NH_2)_2{\rightarrow}$$$$Ca_3(PO_4)_2+H_2CO_3+NH_3$$ $$3)\;Ca(H_2PO_4)_2+CaCO_3+CO(NH_2)_2{\rightarrow}$$$$Ca_3(PO_4)_2+H_2CO_3+CaCO_3+NH_3$$ A,B and C were placed in desiccators respectively a six month period. During the time of storage, the water soluble, the available phosphoric acid and urea-N were measured once a month, seven times with the control measurement. The results may be summarized as follows. 1. None of A, B and C showed any change in the urea-N with the lapse of time. This fact indicated that the combination of calcium superphosphate and urea with lime for fertilizer was not unfavourable. 2. A, B and C decreased in the amount of water soluble $P_2O_5$ with the passage of time. This fact indicated that the mixing of calcium superphosphate and urea with lime for fertilizer was unfeasible. 3. The available $P_2O_5$ in any of A,B and C did not undergo a change as time went by. This fact suggested that the combination of calcium superphate and urea with lime for fertilizer was favourable.

• 방사성폐기물학회지
• /
• 제4권4호
• /
• pp.311-320
• /
• 2006

[ $^{14}C$ ] 핵종이 함유된 IRN-150 혼상 폐수지로부터 $H^{14}CO_3$ 이온의 제거 및 제거된 $^{14}C$ 핵종의 $^{14}CO_2$ 기체로의 전환 특성을 고찰하였다. 비방사성 $HCO_3$ 이온이 흡착되어 있는 IRN-150 혼합수지로부터 $HCO_3$ 이온의 탈착용액내로의 분리 및 $CO_2$ 기체로의 전환 특성을 용액의 농도 변화에 따라 평가하였으며, 탈착용액으로는 $NaNO_3,\;Na_3PO_4,\;NH_4H_2PO_4,\;H_3PO_4$를 사용하였고, 비교 평가를 위하여 NaOH, $HNO_3$, HCl를 이용한 $CO_2$기체로의 전환 특성을 분석하였다. 아울러 월성 원자력발전소에 저장중인 실제 폐수지를 이용하여 $NH_4H_2PO_4,\;H_3PO_4$ 탈착용액을 이용한 폐수지내 $^{14}C$ 핵종의 $^{14}CO_2$ 기체화 특성을 평가하였고, 탈착후 잔류용액내 존재하는 $^{137}Cs,\;^{60}Co$ 감마핵종을 분석하였다.

• Bulletin of the Korean Chemical Society
• /
• 제29권9호
• /
• pp.1737-1741
• /
• 2008

The electrochemical and thermal stability of $LiNi_{0.8}Co_{0.16}Al_{0.04}O_2$ were studied before and after $Co_3(PO_4)_2$ coating. Different to conventional coating material such as $ZrO_2$ or AlPO4, the coating layer was not detected clearly by TEM analysis, indicating that the $Co_3(PO_4)_2$ nanoparticles effectively reacted with surface impurities such as $Li_2CO_3$. The coated sample showed similar capacity at a low C rate condition. However, the rate capability was significantly improved by the coating effect. It is associated with a decrease of impedance after coating because impedance can act as a major barrier for overall cell performances in high C rate cycling. In the DSC profile of the charged sample, exothermic peaks were shifted to high temperatures and heat generation was reduced after coating, indicating the thermal reaction between electrode and electrolyte was sucessfully suppressed by $Co_3(PO_4)_2$ nanoparticle coating.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.241-242
• /
• 2006

In this work, the $LiFePO_4-LiCoO_2$ mixed cathode electrodes were prepared and their electrochemical performances were measured in different current density. The cell of $LiFePO_4-LiCoO_2$ observed two voltage plateau regions at 3.4 and 3.9V. The cell of $LiFePO_4-LiCoO_2$ (90:10 wt%) mixed cathode delivered a discharge capacity of ca. 139.8 mAh/g at a 0.2C rate. The capacity of the cell decreased with the current rate and a useful capacity of ca 85.7mAh/g was obtained at a 2C rate.

• 한국세라믹학회지
• /
• 제37권8호
• /
• pp.817-823
• /
• 2000

A solid-state electrochemicall cell for sensing CO2 gas was fabricated using a solid electrolyte of Li2CO3-Li3PO4-Al2O3 mixture and a reference electrode of LiMn2O4. The e.m.f. (electromotive force) of sensor showed a good accordance with theoretical Nernst slope (n=2) for CO2 gas concentration range of 100-10000 ppm above 35$0^{\circ}C$. The e.m.f. of sensor was constant regardless of oxygen partial pressure at the high temperature above 0.1 atm. It was, however, a little depended on oxygen partial pressure as the pressure decreased below 0.1 atm. The oxygen-dependency of our sensor gradually disappeared as the operating temperature increased. The sensing behavior of our CO2 sensor was affected by the presence of water vapor, but its effect was small comparing with other sensors.

• 한국재료학회지
• /
• 제13권4호
• /
• pp.246-250
• /
• 2003

Calcium phosphate was prepared by chemical reaction formula using Oyster shells and $H_3$$PO_4$solutions. After added to 0.1 M∼0.9$ M H_3$$PO_4$ solution for oyster shell, prepared powders were investigated for heating properties and formation phase with heat treatment temperatures. As the results of XRD analysis of heated powders at $500^{\circ}C$∼$1200^{\circ}C$,$ CaCO_3$ phases were observed at the temperature of below 900 TEX>$^{\circ}C$ and in the condition of 0.1 M∼0.9 M $H_3$$PO_4$ solutions. However, $CaCO_3$, $CaPO_3$(OH) and $Ca_3$($PO_4$)$_2$ phases were appeared at the temperature range between $500∼900^{\circ}C$ and in the solution of 0.7 M to 0.9 M $H_3$$PO_4$. $Ca_{ 5}$($PO_4$)$_3$(OH) and CaO phases due to the decarbonation of oyster shells($CaCO_3$) were appeared at above $1000^{\circ}C$ and in the solution of below 0.5 M $H_3$X$PO_4$. However in the case of above 0.7 M $H_3$$H_4$ solutions, $Ca_{5}$ ($PO_4$)$_3$(OH) was decomposed into $Ca_3$($PO_4$)$_2$ at more higher 100$0^{\circ}C$. Thus $Ca_3$(X$Ca_4$)$_2$ phases were appeared at higher than 100$0^{\circ}C$.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2000년도 춘계총회,특별강연,심포지움,연구발표회
• /
• pp.74.1-74.1
• /
• 2000

• 한국결정성장학회지
• /
• 제33권5호
• /
• pp.167-173
• /
• 2023

출발원료인 바나듐 산화물을 이용한 Li₃V₂(PO₄)₃를 제조하기 위해 N₂H₄·H₂O를 환원제로 사용하였고 낮은 전기 전도성을 개선하기 위하여 알긴산을 탄소원으로 사용하여 직접 공침법을 통해 단사정계 Li₃V₂(PO₄)₃/C 복합체의 양극 활물질을 합성하여 전기화학 특성을 비교하였다. 구형에 가까운 형상으로 대략 1~2 ㎛의 균일한 입자 크기와 좁은 입도분포를 가지는 Li₃V₂(PO₄)₃을 얻을 수 있었다. 또한 제조한 Li₃V₂(PO₄)₃/C 복합체의 양극 활물질은 Li₃V₂(PO₄)₃ 보다 초기 방전용량의 개선과 안정적으로 용량을 유지하는 사이클 특성이 우수하여 탄소 복합체 형성으로 인해 양극 활물질의 전기화학적 성능이 향상하는 것을 알 수 있었다.

• Advances in nano research
• /
• 제3권2호
• /
• pp.55-66
• /
• 2015

Crystalline $Ce^{3+}$ co-doped $LaPO_4$:RE ($RE=Dy^{3+}$, $Tb^{3+}$, $Eu^{3+}$, $Sm^{3+}$) and mix doped rare earth ions of $Dy^{3+}$, $Tb^{3+}$ and $Eu^{3+}$ were prepared by the polyol method at $150^{\circ}C$. Strongly enhance luminescence intensity is obtained with the co-doping of $Ce^{3+}$ with $LaPO_4$:$Dy^{3+}$ and $LaPO_4$:$Tb^{3+}$ due to charge transfer (CT) occurring from $Ce^{3+}$ to $Dy^{3+}$ and $Ce^{3+}$ to $Tb^{3+}$, where as there is no significant changes in luminescence intensity of $Ce^{3+}$ co-doped $Eu^{3+}$ and $Sm^{3+}$ doped $LaPO_4$ samples. The luminescence color can be tuned from green to white by varying the excitation wavelength for the mix ions $Ce^{3+}$, $Dy^{3+}$, $Tb^{3+}$ and $Eu^{3+}$ doped with $LaPO_4$.