• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회 논문집
• /
• pp.178-182
• /
• 2005

In the forthcoming 21C, the development of cultural lives depends on that the water demand will increase or not. On the opposite site of that circumstance, many factors of the small watersheds will influence directly on how to cover the surface of watersheds with land use, no planning developing watersheds, and the rearrangement of small rivers. Especially as the extraordinary climatic Phenomena, exhaust of $CO_2$ and destruction of 03 layer, water resource and water foresting content of the small watersheds will be decreased by confusing on the malting a plan of water resources. For example, those are Typhoon Rusa in 2002, Typhoon Maemi in 2003 and heavy storms in 2004. This study area has three group and one of them having three small watersheds, total five small watersheds. That is, Sabukmyeon small watersheds in Chuncheon, Three small watersheds in Wonju(Jeoncheon, Jupocheon and Hasunamcheon), and Suipcheon in Yanggu-Gun which are located far away each other three group and different precipitation data. According to the land use such as dry field(or farm), rice field, forest land. building site and others in small watersheds, the amount of runoff will be impacted by monthly precipitation. The comparison between the runoff was getting from Kajiyama Formula and calculated runoff from multi-linear regressed equations by land use Percentage was performed with different precipitation data and different small watersheds. Its correlations which are estimated by coefficient of correlation will be accepted or not, as approached 1.0000 values. As the monthly water resources amount is estimated by multi-linear regressed equations with different precipitation data and different small watersheds having no gauging station, we make a plan in order to demand and supply the water quantity from small river watersheds during return periods.

• 동력기계공학회지
• /
• 제21권6호
• /
• pp.79-85
• /
• 2017

A heat pump system is a highly efficient, eco-friendly device which consumes a small amount of energy and supply a lot of energy for heat formation. In addition, it is a single device system that has low generation effect about carbon dioxide. There are many researches related to the electronic expansion valve and the heat pump, but the detailed data analysis of each influence is insufficient. In this study, the cooling capacity and COP of the heat pump system were investigated by varying frequency of the inverter connected to compressor, inlet temperature of chilled water into evaporator and inlet temperature of cooling water into condenser. The results are as follows : (1) The cooling capacity increased as the inverter frequency, inlet temperature of chilled water into evaporator increased, and inlet temperature of cooling water into condenser decreased. (2) The COP increased as the frequency of inverter, inlet temperature of cooling water into condenser decreased and the inlet temperature of chilled water into evaporator increased.

• Environmental Engineering Research
• /
• 제25권2호
• /
• pp.135-146
• /
• 2020

This study was aimed to investigate the possibility of using raw and anaerobically-digested piggery wastewater as culture media for a green microalga Chlorella vulgaris (C. vulgaris). Due to high concentration of ammonia and dark color, the microalga did not grow well in this wastewater. In order to solve this problem, air stripping and NaOCl-treatment were applied to reduce the concentration of NH₃-N and the color intensity from the wastewater. Algal growth was monitored in terms of specific growth rate, biomass productivity, and nutrient removal efficiency. As a result, C. vulgaris grew without any sign of inhibition in air-stripped and 10-folds diluted anaerobically-digested piggery wastewater with enhanced biomass productivity of 0.57 g/L·d and nutrient removal of 98.7-99.8% for NH₃-N and 41.0-62.5% for total phosphorus. However, NaOCl-treatment showed no significant effect on growth of C. vulgaris, although dark color was removed greatly. Interestingly, despite that the soluble organic concentration after air stripping was still high, the biomass productivity was 4.4 times higher than BG-11. Moreover, air stripping was identically effective for raw piggery wastewater as for anaerobic digestate. Therefore, it was concluded that air stripping was a very effective method for culturing microalgae and removing nutrients from raw and anaerobically-digested piggery wastewaters.

• 유기물자원화
• /
• 제10권1호
• /
• pp.61-67
• /
• 2002

가축분의 퇴비화 효과에 미치는 이탄의 영향을 구명하기 위하여 수분조절제(톱밥, 톱밥+이탄, 이탄)를 달리 혼합한 3종(우분, 돈분, 계분)의 가축분을 퇴비화시킨 후 수분함량, 유기물, 유기물대 질소비, 비료성분(N, P, K) 및 중금속(As, Cd, Hg, Pb, Cr, Cu) 함량과 미생물(호기성종속영양세균, 고온성세균, 곰팡이, 방선균) 밀도의 차이를 비교 분석한 결과 다음과 같은 결론을 얻었다. 1) 퇴비화 과정을 거친 3종의 가축분 모두에서 사용된 톱밥+이탄, 이탄, 톱밥 혼합순으로 유기물함량이 높게 나타나 이탄이 유기물함량을 증가시키는 요인으로 작용하였다. 2) 유기물대 질소비와 수분함량은 모든 가축분별로 톱밥을 부재료로 이용한 것보다 이탄 또는 톱밥+이탄을 부재료로 이용한 것이 낮게 나타나 이탄이 퇴비화 숙성과정에 긍정적으로 영향하였다. 3) 비료성분(N, P, K)은 톱밥을 부재료로 이용한 것보다 이탄을 부재료로 혼합한 것에서 높게 나타났으나, 중금속함량은 모든 부재료 처리에서 유사한 수준이었다. 4) 미생물적 특성을 비교한 결과 톱밥만을 이용한 것보다 이탄을 부재료로 이용한 것이 호기성 종속영양세균, 고온성세균 및 곰팡이의 밀도가 높게 나타나 이탄을 혼합할 때 미생물 활동량 증가에 따른 퇴비 분해가 왕성한 것으로 나타났다. 5) 이러한 결과를 종합할 때 이탄이 혼합된 퇴비는 3종의 가축분 모두에서 톱밥보다 퇴비화 효과가 좋은 것으로 나타나 향후 이탄 활용으로 퇴비의 품질향상을 기대할 수 있을 것으로 사료된다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2170-2174
• /
• 2005

Selective Laser Sintering (SLS) is a useful rapid prototyping technique for the manufacture of three dimensional (3D) solid objects directly from a scanning data. A new approach called a Selective Multi-Laser Sintering (SMLS) system has been developed at Korea Institute Machinery & Materials (KIMM) as an industrial type SFFS. This SMLS machine is built with a frame, heaters, nitrogen supply part, laser system. This system uses the dual laser and 3D scanner made in $Solutionix^{TM}$ to improve the precision and speed for large objects. The three-dimensional solid objects are made of polyamide powder. The investigation on each part of SMLS system is performed to determine the proper theirs design and the effect of experimental parameters on making the 3D objects. The temperature of the system has a great influence on sintering the polymer. Because the stability of the powder temperature prevents the deformation of each layer, the controls of the temperature in both the system and the powders are very important during the process. Therefore, we simulated the temperature distribution of build room using the temperature analysis with ANSYS program. Selected radiant heater is used to raise temperature of powder to melting point temperature. The laser parameters such as scan spacing, scan speed, laser power and laser delay time affect the production the 3D objects too. The combination of the slow scan speed and the high laser power shows the good results without the layer curling. The work is under way to evaluate the effect of experimental parameters on process and to produce the various objects. We are going to experiment continuously to improve the size accuracy and surface roughness.

• 한국해양공학회지
• /
• 제26권1호
• /
• pp.78-83
• /
• 2012

The abundant nutrients contained in deep seawater are delivered by natural upwellings from the deep sea to the surface sea. However, the natural upwelling phenomenon is limited to specific areas of the sea; in other areas, the thermocline separates the surface sea from the lower layer. Thus, the surface layer is often deficient in nutritive salts, causing the deterioration of its primary productivity and ultimately leading to an imbalance in the marine ecosystem. Without a consistent supply of nitrogenous nutritive salts, they are absorbed by phytoplankton, resulting in a considerable problem in primary productivity. To solve this issue, a floating type of artificial upwelling system is suggested to artificially pump up, distribute, and diffuse deep seawater containing rich nutritive salts. The key technologies for developing such a floating artificial upwelling system are a floating offshore structure with a large diameter riser, self-supplying energy system, density current generating system, method for estimating the emission and absorption of CO2, and way to evaluate the primary production variation. Strengthening the primary production of the sea by supplying deep seawater to the sea surface will result in a sea environment with abundant fishery resources.

• 한국산업보건학회지
• /
• 제4권1호
• /
• pp.117-126
• /
• 1994

Some of the important and vital roles performed by the Health Care Center of Pohang Iron & Steel Co., Ltd.(POSCO) are the periodic monitoring of the work sites as well as regular medical check-ups for each workers to ensure both pleasant and safe working conditions and to protect employees' health. Pohang Steel Works, which has 42 plants, 26 facilities and 12,000 employees, has an annual crude steel production capacity of 9,670,000 using 24,500,000 ton of raw materials. We have measured lots of areal and personal working environment according to Occupational Safety and Health Law semiannually. All data collected on industrial hygiene is stored and managed by personal computer. The developed of a computerized industrial hygiene control system linked to the company's main computer system will provide efficient evaluation of the working environment as well as critical informations on employees' health. Development of this system had begun in May, 1992 and was completed in March, 1994. The computerized industrial hygiene control system can; 1. store industrial hygiene data, providing key pertinent to the diagnosis of occupational related illnesses, and if necessary, the basis for improving the working environment, 2. decide type and time of medical examination of each work for exposure to specific agents, and supply proper protection periodically, 3. prevent occupational related illnesses through evaluation of environmental and biological monitoring, and performance of epidemiological surveillance, 4. facilitate proper job placement through linking of industrial hygiene control and personnel information systems, 5. monitor job processes. levels of chemical agents used, and new agents introduced, 6. and increase productivity by saving time resulting from the implementation of the computerized sysyte,

• 전자공학회논문지SC
• /
• 제41권2호
• /
• pp.37-44
• /
• 2004

본 논문에서는 전파천문 분야에서 특이한 전파원의 서베이 연구나, 외부은하의 스펙트럴 선 관측연구에 필요한 자기상관분광기 형태의 광-대역 전파분광기 제작에 있어서 가장 핵심적인 역할을 하는 상관기 보드를 설계, 제작하였다. 본 연구에서는 미국 국립천문대(NRAO)에서 개발된 QUAINT 상관기 칩을 사용하여 최대 100 ㎒의 동작 속도로 최대 400 ㎒ 대역폭을 갖는 중간주파수 신호를 분광할 수 있는 상관기 보드를 설계, 제작하였다. 제작된 상관기 보드의 성능시험을 위해 1.67 ㎒와 0.5 ㎒의 구형파를 인가하여 자기상관계수를 구하고, FFT를 취한 결과 이론적인 상관결과와 거의 같은 결과를 얻었다.

• 한국지반신소재학회논문집
• /
• 제8권2호
• /
• pp.55-62
• /
• 2009

최근 국토의 균형 있는 발전을 위하여 서해안 및 남해안 지역에 주로 분포되고 있는 연약지반에 대한 건설공사가 활발히 이루어지고 있다. 이러한 연약지반은 지반의 강도가 약하고, 압축성이 강해서 구조물을 축조하기 전에 반드시 표층안정처리, 압밀촉진, 치환공법 등의 지반개량이 선행되어야 한다. 이러한 연약지반 개량공법 중 표층처리공법은 샌드매트의 포설을 이용한 처리가 주를 이루었다. 그러나, 샌드매트공법에 요구되는 모래의 양이 증가함에 따라 공급이 원활하게 이루어지고 있지 않은 상태이다. 본 연구에서는 이러한 문제점을 해결하고자 샌드매트 대체제로서 풍쇄 슬래그의 사용이 적합한지를 판단하기 위하여 기본 물성시험, 실내 통수능 시험, 침하특성 분석을 통해서 확인하고자 한다.

• 한국실천공학교육학회논문지
• /
• 제4권2호
• /
• pp.110-115
• /
• 2012

IPP (Industry Professional Practice)는 학부교육(academic study)과 산업체 근무(industrial work)를 결합시킨 산학협력 교육모델로 학생들에게 학업과 현장업무를 교대로 경험하게 하여 실용교육의 효과를 극대화 시키고 또한 본인의 적성과 전공에 맞는 진로를 스스로 결정하도록 하여 궁극적으로는 대학 졸업생의 취업역량을 강화하고, 국가적으로는 청년실업 문제의 해소 및 대학과 산업체간의 인력수급 불일치 현상 등을 해소하기 위한 제도이다. 본 논문에서는 IPP 제도의 성공적인 운영을 위해 체계적이고 구체적으로 고려해야 할 학사-운영방안에 대해 검토하고 제안한다. 주요 내용은 학제개편(semester-based quarter제) 방안, 교과과정 개편방안, 학점인정(15학점) 및 성적평가 방안, 공학설계/졸업설계 운영방안, 산학연계 교과목 운영방안 및 경과조치 방안 등이다.