• Elastomers and Composites
• /
• v.43 no.4
• /
• pp.230-240
• /
• 2008

In order to synthesize polymer particle containing inorganic material, styrene and nbutylmetacrylate were copolymerized with alumina by dispersion polymerization. The ratio in weight of styrene to n-butyl methacrylate was 3:1. Poly(N-vinyl pyrrolidon) and 2,2'-azobis(isobutyronitrile) were added as stabilizer and as initiator, respectively. The change of particle size was investigated with concentration of initiator, the type of medium, the mixed solubility parameter (${\delta}_{mix}$) of medium, and coupling agent. The enhancement in concentration of initiator resulted in slight increase of particle size. The increase of polarizability in medium also yielded the increase of particle size. In case of changing the ratio of isopropanol to distilled water, we could find relationship of $[{\delta}_{mix}]^{-4.01}\;{\propto}$ particle size and $[{\delta}_{mix}]^{-0.83}\;{\propto}$ particle size distribution(PSD). The type and the concentration of coupling agent showed no effect on the particle size and PSD.

• Korean Chemical Engineering Research
• /
• v.57 no.6
• /
• pp.826-831
• /
• 2019

Experimental data of phase equilibrium is reported for caprolactone acrylate in supercritical carbon dioxide. Bubble-point data was measured by synthetic method at temperatures ranging from (313.2 to 393.2) K and pressures up to 55.93 MPa. In this research, the solubility of carbon dioxide for the (carbon dioxide + caprolactone acrylate) system decreases as temperature increases at a constant pressure. The (carbon dioxide + caprolactone acrylate) system exhibits type-I phase behavior. The experimental result for the (carbon dioxide + caprolactone acrylate) system was correlated with Peng-Robinson equation of state using mixing rule. The critical property of caprolactone acrylate was predicted with the Joback and Lyderson method.

• Journal of the Korean Chemical Society
• /
• v.63 no.6
• /
• pp.446-452
• /
• 2019

We have developed a method that can leach Co, Mn, and Ni in the cathode active material safely using lactic acid. When cathode active material was leached by lactic acid, lactic acid showed the highest efficiency at 2 N than 1 N and above 4 N concentration. When the cathode active material was added incrementally into the solution of lactic acid, the maximum solubility was 30 g/L at 2 N concentration. Oxalic acid was added in the solution of lactic acid and it showed that rare metals represent the most economical recovery efficiency at 4 g/L. Based on this study, it was found that the optimal condition for recovery of rare metals from cathode active material is oxalic acid : cathode active material = 7 : 1 as a ratio of weight. In addition, it was observed that the precipitate produced by oxalic acid is a polynuclear crystalline material bonded with 3 components of Co, Ni, and Mn.

• Applied Chemistry for Engineering
• /
• v.7 no.1
• /
• pp.26-33
• /
• 1996

This study is related to the investigation of the characteristics of phase transfer catalysts on the addition reaction of carbon dioxide and phenyl glycidyl ether(PGE). Quaternary ammonium salts showed a good conversion of PGE at l atm of $CO_2$. Among the quaternary ammonium salts tested, the ones with higher alkyl chain length and with more hydrophilic counter anion showed higher catalytic activity. Polyethylene glycol and crown ether were also effective catalysts when they are used with NaI. High pressure of $CO_2$increased the conversion of PGE by increasing solubility of $CO_2$in NMP. A mechanism of the reaction involving the role of phase transfer catalyst was also proposed.

• Transactions on Electrical and Electronic Materials
• /
• v.7 no.3
• /
• pp.149-153
• /
• 2006

An attempting to produce a p-type diluted magnetic semiconductor (DMS) using $Ti_{1-x}Co_xO_{2-\delta}-based$ thin films was made by suitable control of the deposition parameters including deposition temperature, deposition pressure, and doping level using a pulsed laser deposition method. T$Ti_{0.97}Co_{0.03}O_{2-\delta}-based$ (TCO) films deposited at $500^{\circ}C$ at a pressure of $5\times10^{-6}$ Torr showed an anomalous Hall effect with p-type characteristics. On the other hand, films deposited at $700^{\circ}C$ at $5\times10^{-6}$ Torr showed n-type behaviors by a decreased solubility of cobalt. The charge carrier concentration in the p-type TCO films was approximately $7.9\times10^{22}/cm^3$ at 300 K and the anomalous Hall effect in the p-type TCO films was controlled by a side-jump scattering mechanism. The magnetoresistance (MR), measured at 5 K in p-type TCO films showed a positive behavior in an applied magnetic field and the MR ratio was approximately 3.5 %. The successful preparation of p-type DMS using the TCO films has the potential for use in magnetic tunneling junction devices.

• Nutrition Research and Practice
• /
• v.2 no.1
• /
• pp.3-7
• /
• 2008

This study was carried out to investigate the efficacy of sn-2 palmitic acid-fortified vegetable oil (Sn2PA) on calcium absorption and to confirm the synergistic effects of fructooligosaccharide on calcium absorption. Male SD rats were fed 6 kinds of casein based diets containing vegetable oil (control), sn-2 palmitic acid-fortified vegetable oil (Sn2PA) and Sn2PA with fructooligosaccharide(Sn2PAFO) in two levels of calcium (normal 0.5% and high 1.0%) for 3 weeks. Total lipids, cholesterol, triglyceride and calcium in blood were measured. Feces were collected using cages for 4 days. Serum concentrations of total lipids and calcium were not significantly different among groups. However, serum triglyceride was significantly decreased by fructooligosaccharide supplementation regardless of dietary calcium level. The lipid absorption was not significantly different among experimental groups. Calcium absorption was significantly higher in Sn2PAFO group than other groups. Calcium solubility of intestine was increased by sn-2 palmitic acid supplementation. These results suggest that sn-2 palmitic acid and fructooligosaccharide supplementation could be beneficial for baby foods including infant formula, with regard to increasing absorption of calcium by more soluble calcium in the small intestinal content.

• Applied Chemistry for Engineering
• /
• v.25 no.6
• /
• pp.559-563
• /
• 2014

It is well known that $CO_2$ can be dissolved easily in imidazolium-based room temperature ionic liquids (RTILs). Because of the high $CO_2$ solubility in RTILs, membranes containing RTILs can separate easily gas mixtures such as $CO_2/N_2$ and $CO_2/CH_4$. In this study, we prepared poly(vinylidene fluoride)-hexafluoropropyl copolymer (PVDF-HFP) gel membranes with several RTILs and measured permeabilities of several gases. When the anion of ionic liquids was tetrafluoroborate($BF{_4}^-$), both $CO_2$ permeability and selectivities decreased as the carbon number of the cation increased. When the cation of ionic liquids was 1-ethyl-3-methylimidazolium[emim], $CO_2$ permeability of gel membranes containing bis(trifluoromethane) sulfoneimide($Tf_2N^-$) anion was double compared to those containing tetrafluoroborate($BF{_4}^-$) anion. However, $CO_2/N_2$ and $CO_2/CH_4$ selectivities of the $Tf_2N^-$ case were decreased, whereas the $H_2$ selectivity was almost the same for two cases.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.6
• /
• pp.779-783
• /
• 1999

The process of alginate preparation was shortened with microwave pretreatment and hot water extraction without any other treatment. The yield of extracted alginate was very different according to raw material and microwave treatment conditions. The yield of extracted alginate from sea mustard was higher than sea tangle and increased with the temperature rise and time of microwave treatment. Optimum extraction conditions by microwave treatment were 90 min at $100^{\circ}C$ for the sea mustard and 120 min at $100^{\circ}C$ for the sea tangle. On the other hand, the solubility of the alginate from sea mustard was $69\%\~80\%$ and the viscosity were 8.7$\~$1.5 cps, respectively. The solubility and the viscosity of the sea tangle alginate was higher than the sea mustard to $77\~84\%$ and in the range of 8.9$\~$1.8 cps, respectively. The extraction temperature by hot water greatly influenced on the yield of alginate, but the solubility and viscosity was not affected by the hot water extraction. The molecular weight of alginate obtained through the extraction by $Na_2CO_3$ solution and the microwave pretreatment was 800 kDa, and in the range of 12$\~$45 kDa, respectively.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.32 no.1
• /
• pp.59-74
• /
• 2012

Buffer solubility and protein fractionation were evaluated from the hays (timothy, alfalfa and klein) and straws (tall fescue and rice), and $In$ $vitro$ trial was conducted to examine the effect of buffer extraction on fermentation characteristics, degradability and gas ($CO_2$ and $CH_4$) production. Buffer soluble protein (SP) content and A fraction in total protein were highest in alfalfa hay as 61% and 41.77%, respectively while lowest in rice straw (42.8% and 19.78%, respectively). No difference was observed in B1 fraction among forages but B2 fraction was slightly increased in klein hay (12.34%) and tall fescue straw (10.05%) compared with other forages (6.34~8.85%). B3 fraction of tall fescue was highest as 38.49% without difference among other forages while C fraction was highest in rice straw. pH in incubation solution was higher in all forages after extraction than before extraction at 3h (P<0.01) and 6h (P<0.05), and pH from hays of timothy and alfalfa was higher than the other forages at 6h (P<0.05) and 12h (P<0.001). Regardless of extraction, ammonia-N concentration from alfalfa hay was increased at all incubation times and extraction effect was appeared only at 3h incubation time (P<0.01). Total VFA concentration from alfalfa hay was highest up to 24h incubation while those from tall fescue straw and rice straw were lowest. Buffer extraction decreased (P<0.01~P<0.001) the total VFA concentration. Acetic acid proportion was increased (P<0.001) before extraction of forages but no difference was found between forages. Propionic acid($C_3$) proportion was also increased(P<0.001) before extraction in all forages than in straws at 3h, 24h and 48h incubations, and $C_3$ from hays were mostly higher (P<0.05) than from straws. Butyric acid proportion, however, was not affected by extraction at most incubation times. Parameter 'a' regarding to the dry matter (DM) degradation was increase (P<0.001) in all forages before extraction, and was decreased (P<0.05) in tall fescue straw and rice straw compared with hays. Parameter 'b' was also increased (P<0.001) before extraction but no difference was found between forages. Effective degradability of DM (EDDM) was higher (P<0.001) before extraction in most forages except for rice straw. Buffer extraction decreased (P<0.05) all parameters (a, b, and c) regrading to the crude protein (CP) degradation but no difference was found between forages. Effective degradation of CP (EDCP) was lower (P<0.05) in straws than in hays. Parameters 'a' and 'b' regarding to the NDF degradation (P<0.01) and effective degradability of NDF (EDNDF, P<0.001) were also higher in forages before extraction than after extraction but no difference was found between forages. Buffer extraction reduced (P<0.05~P<0.001) $CO_2$ production from all the forages uo to 24h incubation and its production was greater (P<0.05~P<0.01) from hays than straws. Methane ($CH_4$) production was also greater (P<0.01~P<0.001) in all forages at all incubation times, and its production was greater (P<0.05) from hays than from straws at most incubation times. Based on the results of the current study, it can be concluded that buffer solubility and CP fractionation might be closely related with $In$ $vitro$ VFA concentration, degradability and gas ($CO_2$ and $CH_4$) production. Thus, measurement of buffer solubility and protein fractionation of forages might be useful to improve TMR availability in the ruminants.

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.1
• /
• pp.93-101
• /
• 2006

This research makes a new attempt to apply the activated seawater by electrolysis in the development of two-stage wet scrubber system to control the exhaust gas of large marine diesel engines. First, with using only seawater that is naturally alkaline (pH typically around 8.1). the $SO_2\;and\;SO_3$ are absorbed by relatively high solubility compared to other components of exhaust pollutants, and PM (Particulate Matter) is removed through direct contact with sprayed seawater droplets. Besides, the electrolyzed alkaline seawater by electrolysis, which contains mainly NaOH together with alkali metal ions $(i.e.\;Na^+,\;Mg^{2+},\;Ca^{2+})$, is used as the absorption medium of NOx and $CO_2$. Especially, to increase NOx absorption rate into the alkaline seawater. nitric oxide (NO) is adequately oxidized to nitrogen dioxide $(NO_2)$ in the acidic seawater, which means both volume fractions are adjusted to identical proportion. The results found that the strong acidic seawater was a valid oxidizer from NO to $NO_2$ and the strong alkaline seawater was effective in $CO_2$ absorption In the scrubber test, the SOx reduction of nearly $100\%$ could be achieved and also led to a sufficientPM reduction. Hence, the author believes that applying seawater and its electrolyte would bring the marine air pollution control system to an economical measure. Additionally it is well known that NOx and SOx concentration has a considerable influence on the $N_2O$ emission of green house gas. Although the $N_2O$ concentration exhausted from diesel engines is not as high, the green house gas effect is around 300 times greater than an equivalent volume of $CO_2$. Therefore, we investigated the $N_2O$ removal efficiency with using the electrolyzed seawater too. Finally this research would also plan to treat the effluent by applying electro-dialysis and electro-flotation technique s in the future.