• 한국재료학회지
• /
• 제25권8호
• /
• pp.423-428
• /
• 2015

Impedancemetric $NO_x$ (NO and $NO_2$) gas sensors were designed with a stacked-layer structure and fabricated using $LaCr_xCo_{1-x}O_3$ (x = 0, 0.2, 0.5, 0.8 and 1) as the receptor material and $Li_{1.3}Al_{0.3}Ti_{1.7}(PO_4)_3$ plates as the solid-electrolyte transducer material. The $LaCr_xCo_{1-x}O_3$ layers were prepared with a polymeric precursor method that used ethylene glycol as the solvent, acetyl acetone as the chelating agent, and polyvinylpyrrolidone as the polymer additive. The effects of the Co concentration on the structural, morphological, and $NO_x$ sensing properties of the $LaCr_xCo_{1-x}O_3$ powders were investigated with powder X-ray diffraction, field emission scanning electron microscopy, and its response to 20~250 ppm of $NO_x$ at $400^{\circ}C$ (for 1 kHz and 0.5 V), respectively. When the as-prepared precursors were calcined at $700^{\circ}C$, only a single phase was detected, which corresponded to a perovskite-type structure. The XRD results showed that as the Co concentration of the $LaCr_xCo_{1-x}O_3$powders increased, the crystal structure was transformed from an orthorhombic phase to a rhombohedral phase. Moreover, the $LaCr_xCo_{1-x}O_3$ powders with $0{\leq}x<0.8$ had a rhombohedral symmetry. The size of the particles in the $LaCr_xCo_{1-x}O_3$powders increased from 0.1 to $0.5{\mu}m$ as the Co concentration increased. The sensing performance of the stack-structured $LaCr_xCo_{1-x}O_3/Li_{1.3}Al_{0.3}Ti_{1.7}(PO_4)_3$ sensors was found to divide the impedance component between the resistance and capacitance. The response of these sensors to NO gas was more sensitive than that to $NO_2$ gas. Compared to other impedancemetric sensors, the $LaCr_{0.8}Co_{0.2}O_3/Li_{1.3}Al_{0.3}Ti_{1.7}(PO_4)_3$ sensor exhibited good reversibility and reliable sensingresponse properties for $NO_x$ gases.

• 생약학회지
• /
• 제20권4호
• /
• pp.205-214
• /
• 1989

The sensing of odour compounds in gas phase is an attractive target in recent sensor technology. Based on the finding that a plant leaf can respond to various gas molecules by changing its potential, biosensing system using a plant leaf has been investigated for the detection of odour compounds. A leaf of some plant species responded to odour compounds directly by changing its potential $5{\sim}10\;mV$. That the leaf was actually sensing an odour was much more remarkably detected from the difference between the response profile to pure $CO_2$ gas and that to $CO_2$ gas containing odour compounds. Then the quantitative study (ppb level) is now being performed on the response of a tobacco leaf to benzyl acetate; a component of jasminelike odours. The concept of biosensing and its significance are also described from the viewpoint of sensor technology.

• Ocean and Polar Research
• /
• 제31권4호
• /
• pp.297-304
• /
• 2009

We investigated the response of the westerly winds over the Southern Ocean (SO) to glacial boundary conditions for the Last Glacial Maximum using the CCM3 atmospheric general circulation model. In response to glacial boundary conditions, the zonally averaged maximum SO westerly winds weakened 20-35% and were displaced toward the equator by 3-4 degrees. This weakening of the SO westerly winds arose from a substantial increase in mean sea level pressure (MSLP) in the southern part of the SO around Antarctica relative to the northern part. The increase in MSLP around Antarctica is associated with a marked temperature reduction caused by an increase in sea ice cover and ice albedo feedback during the glacial time. The weakened westerly winds in the SO and their equator-ward displacement might play a role in reducing the atmospheric $CO_2$ concentration by reducing upwelling of the carbon rich deep water during the glacial time.

• 한국표면공학회지
• /
• 제50권4호
• /
• pp.296-300
• /
• 2017

NiO nanofibers with Au nanoparticles were synthesized by sol-gel and electrospinning techniques, in which the reduction process by ultraviolet exposure is included for the growth of Au nanoparticles in the electrospinning solution. FE-SEM(Field Emission Scanning Electron Microscopy), TEM(Transmission Electron Microscopy) revealed that the synthesized nanofibers had the diameter of approximately 200 nm. X-ray diffraction showed the successful formation of Au-decorated NiO nanofibers. Gas sensing tests of Au-decorated NiO nanofibers were performed using reducing gases of CO, and $C_6H_6$, $C_7H_8$, $C_2H_5OH$. Compared to as-synthesized NiO nanofibers, the response of Au-loaded NiO nanofibers to CO gas was found to be about 3.4 times increased. On the other hand, the response increases were only 1.1-1.3 times for $C_6H_6$, $C_7H_8$, and $C_2H_5OH$.

• 대한치과보철학회지
• /
• 제36권3호
• /
• pp.483-495
• /
• 1998

The purpose of this study was to evaluate the human pulpal response to Dentin Bonding Desensitizer. Class V cavities were prepared on the buccal surfaces of the first premolars and Dentin Bonding Desensitizer(ALL-BOND Desensitizer, Bisco, Inc. U.S.A.) was applicated in ten experimental teeth, or ZOE(PROPAC, GC Co. TOKYO, JAPAN) cement in eight control teeth and cavities were filled with light curing glass ionomer(Fuji II LC, GC Co., TOKYO, JAPAN). At 3-day and 25-day postoperative interval. pulpal response was observed and evaluated histologically with light microscope. The results were as follows. ; 1. At 3-day postoperative interval, the control teeth were grade 1 inflammatory cell response and grade 1 connective tissue response. 2. At 25-day postoperative interval, all control teeth were grade 1 inflammatory cell response and in three control teeth grade 1 connective tissue response were observed, and one teeth showed grade 2 connective tissue response. 3. At 3-day postoperative interval, the experimental teeth were grade 1 inflammatory cell response and grade 1 connective tissue response. Below the cavity, a few inflammatory cell(PMNs) in odontoblastic layer, increased blood vessels and pulpal cells were seen and this pulpal response was similar to control teeth. 4. At 25-day postoperative interval, in four experimental teeth grade 1 inflammatory cell response and grade 1 connective tissue response were observed, and one experimental teeth showed mild inflammatory response. 5. At 3-day and 25-day postoperative interval, no reparative dentin deposition was seen. 6. Both experimental and control group, pulpal response showed difference between 3 and 25-day of postoperative interval. In control teeth, increased predentin and pulpal cells were seen and in experimental teeth, congestion of blood vessels and increased pulpal cells were seen. In conclusion, the pulpal irritation due to this Dentin Bonding Desensitizer was not severe, and it was considered that the agent was not harmful to the human pulp.

• 센서학회지
• /
• 제18권1호
• /
• pp.54-62
• /
• 2009

${Co_3}{O_4}$ and ${Co_3}{O_4}$-based thick films with additives such as ${Co_3}{O_4}-{Fe_2}{O_3}$(5 wt.%), ${Co_3}{O_4}-{SnO_2}$ (5 wt.%), ${Co_3}{O_4}-{WO_3}$(5 wt.%) and ${Co_3}{O_4}$-ZnO(5 wt.%) were fabricated by screen printing method on alumina substrates. Their structural properties were examined by XRD and SEM. The sensitivities to iso-${C_4}H_{10}$, $CH_4$, CO, $NH_3$ and NO gases were investigated with the thick films heat treated at $400^{\circ}C$, $500^{\circ}C$ and $600^{\circ}C$. From the gas sensing properties of the films, the films showed p-type semiconductor behaviors. ${Co_3}{O_4}-{SnO_2}$(5 wt.%) thick film heat treated at $600^{\circ}C$ showed higher sensitivity to i-${C_4}H_{10}$ and CO gases than other thick-films. ${Co_3}{O_4}-{SnO_2}$(5 wt.%) thick film heat treated at $600^{\circ}C$ showed the sensitivity of 170 % to 3000 ppm iso-${C_4}H_{10}$ gas and 100 % to 100 ppm CO gas at the working temperature of $250^{\circ}C$. The response time to i-${C_4}H_{10}$ and CO gases showed rise time of about 10 seconds and fall time of about $3{\sim}4$ minutes. The selectivity to i-${C_4}H_{10}$ and CO gases was enhanced in the ${Co_3}{O_4}-{SnO_2}$(5 wt.%) thick film.

• Journal of Microbiology and Biotechnology
• /
• 제19권5호
• /
• pp.530-536
• /
• 2009

Cobalt chloride ($CoCl_2$) treatment of cells in vitro has been shown to induce cellular changes that are similar to those seen following hypoxia. To identify genes that are differentially expressed in response to treatment with $CoCl_2$, we compared the mRNA expression profiles of PC-3 cells that were treated with $CoCl_2$ with those of untreated PC-3 cells, using specific arbitrary primers and two anchored oligo(dT) primers provided in the ACP-based GeneFishing kits. The results of this study demonstrated that the puromycin-sensitive aminopeptidase (PSA) gene was down regulated in PC-3 cells that were treated with $CoCl_2$. This downregulation of PSA expression, in turn, suppressed the proliferation, migration, and invasion of PC-3 cells, as well as the secretion and expression of matrix metalloproteinase-9 (MMP-9).

• Journal of Microbiology and Biotechnology
• /
• 제23권6호
• /
• pp.833-836
• /
• 2013

The inactivation of spores of Penicillium oxalicum by supercritical carbon dioxide ($SC-CO_2$) was optimized by response surface methodology. The optimal inactivation conditions of 16.8 MPa, $49^{\circ}C$, and 20 min were determined using ridge analysis, at which the predicted and experimental $log_{10}$ reductions were obtained as 5.74 and 6.12, respectively. The synergistic effect of a cosolvent (ethanol), which was used to modify $SC-CO_2$, on the inactivation of the fungal spores was investigated. At less severe conditions of 10 MPa and $40^{\circ}C$, P. oxalicum spores of $10^7$ CFU/ml were completely inactivated within 45 min by $SC-CO_2$ modified with ethanol.

• Journal of Electrochemical Science and Technology
• /
• 제15권1호
• /
• pp.152-160
• /
• 2024

In this study, ZnCo₂O₄ nanoparticles were synthesized via the coprecipitation method using different annealing temperatures from 200℃ to 800℃. By varying the treatment temperature, the morphology changed from amorphous to tetragonal, and finally to polygonal particles. As temperature increased, the sizes of the nanoparticles also changed from 5 nm at 200℃ to approximately 500 nm at 800℃. The fabricated material was used to modify the working electrode of a screen-printed carbon electrode (SPE), which was subsequently used to survey the detection performance of the antibiotic, chloramphenicol (CAP). The electrochemical results revealed that the material exhibits a good response to CAP. Further, the sample that annealed at 600℃ displayed the best performance, with a linear range of 1-300 μM, and a limit of detection (LOD) of 0.15 μM. The sensor modified with ZnCo₂O₄ also exhibited the potential for utilitarian application when the recovery in a real sample was above 97%.

• 한국축산식품학회지
• /
• 제31권3호
• /
• pp.420-427
• /
• 2011

The use of lactic-acid bacteria (LAB) is effective for preventing and curing immune disorders by activating the immune system in the digestive tract and the consequent immune response in the blood. In this study, LAB and mixed LABs were used in an atopic dermatitis (AD) mouse model. Alleviation of AD was observed based on the change in cytokine level and immunohistochemical staining. An ex vivo test showed that immunoglobulin-E and interleukin (IL)-4 levels were significantly lower in all groups treated with LAB than in the group treated with only 1-chloro-2,4-dinitrobenzene. Results of an in vivo test based on the ex vivo results showed that the scratch score decreased in all groups treated with the LAB and particularly decreased in the group treated with mixed LABs. Additionally, the T helper (Th) 1 cytokines interferon-gamma and IL-12p40 were upregulated by the LAB and mixed-LABs, whereas levels of the Th2 cytokine IL-4 were downregulated in a mouse model of AD-like skin lesions. Furthermore, hematoxylin & eosin and immunohistochemical staining of the dorsal area of the mice in each group showed that AD improved in the LAB-treated groups. These results suggest that LAB and mixed LABs inhibit the development of AD in NC/Nga mice by suppressing the Th2 cell response and increasing the Th1 cell response. Our results indicate that mixed LABs are better than LAB for treating AD-like skin lesions.