• 천문학회보
• /
• 제38권1호
• /
• pp.51.1-51.1
• /
• 2013

We present molecular line observations of a small group of Young Stellar Objects (YSOs), L1251C. Observations by Spitzer Space Telescope legacy program "From Molecular Cores to Planet Forming Disks"(c2d; Evans et al. 2003) revealed that there are three YSOs within ~15" in L1251C: IRS1 (Class I), IRS2 (Class II), and IRS3 (Class II). In order to understand the molecular environment around these YSOs, we carried out the KVN single-dish observations in $HCO^+$ J=1-0, $H^{13}CO^+$ J=1-0, $N_2H^+$ J=1-0 and HCN J=1-0. CO J=1-0 was also mapped in L1251C with the TRAO 14m telescope. Integrated intensity maps of high density tracers such as $H^{13}CO^+$ J=1-0, $N_2H^+$ J=1-0 and HCN J=1-0 show similar emission distributions, whose peaks are off from the positions of YSOs. However, $HCO^+$ J=1-0, which is believed to trace both infall and outflow, presents its emission distribution different from those of other molecular transitions. The line profile of $HCO^+$ J=1-0 is superimposed by two velocity (narrow and broad) components. The $HCO^+$ outflow map reveals multiple structures while the CO outflow map elongates mainly along the EW direction. With the KVN single dish, the 22 GHz $H_2O$ maser emission has been also monitored toward L1251C to find variations of the systemic velocity and intensity with time.

• 한국표면공학회지
• /
• 제42권4호
• /
• pp.173-178
• /
• 2009

DLC film was synthesized on plastic injection mold(SKD11, $30\;mm\;{\times}\;19\;mm\;{\times}\;0.5\;mm$) and Si(100) wafer for 2 h at $130^{\circ}C$ under 6 mTorr using hybrid method of rf sputtering and ion source. The obtained film was analysed by Raman spectroscopy, AFM, TEM, Nano indenter and scratch tester, etc. The film was defined as an amorphous phase. In the Raman spectrum, broad peak of $sp^2$-bonded carbon attributed to graphite at $1550\;cm^{-1}$ were observed, and the ratio of ID($sp^3$ diamond intensity)/IG($sp^2$ graphite intensity) was approximately 0.54. The adhesion of DLC film was more than 80 N with scratch tester when $0.2\;{\mu}m$ thickness Cr was coated as interlayer. The micro-hardness was distributed at 35~37 GPa. The friction coefficient was 0.02~0.07, and surface roughness(Ra) was 0.34~1.64 nm. The lifetime of DLC coated plastic injection mold using as a connector part in computer was more than 2 times of non-coated mold.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.149-153
• /
• 2001

This paper describes on the fabrication of Fe-Co hydrophilic magnetic fluids from the waste pickling liquor of steel. By adding with HNO$_3$in the waste liquor oxidation is proceeded from Fe$^{3+}$ion at 6$0^{\circ}C$ with air blowing. Ultra-fine Co-ferrite particles with the mean particle size of 50 $\AA$ were produced at pH 12 after adjusting the ratio of Fe$^{3+}$Co$^{2+}$=7/3(wt%) and Fe-Co particles with the mean particle size of 94 $\AA$ were produced by reducing the Co-ferrite particle with H$_2$at the temperature of 50$0^{\circ}C$. After triple adsorption of oleic acid dodecyl benzene sulfonate(D.B.S.) and tetra methyl ammonium(T.M.A.) ions on the surface of Fe-Co particles Fe-Co hydrophilic magnetic fluid was produced by dispersing the Fe-Co particles in ethylene glycol solution. The magnetization of the Fe-Co hydrophilic magnetic fluid increased with increasing the Fe-Co concentration. The magnetic fluid containing 70% (g/cc) Fe-Co showed 73 emu/g in magnetization at the magnetic intensity of 10 kOe.kOe.e.

• 생물환경조절학회지
• /
• 제22권3호
• /
• pp.228-233
• /
• 2013

본 실험은 식물공장시스템에서 인공광원인 백색 LED의 광도와 광주기에 따른 '선홍적축면'의 생육조건을 구명하고자 수행하였다. 그리고 각각의 챔버에 백색 LED를 설치 후 완전임의배치법으로 $20cm{\times}20cm$ 간격으로 재식하였다. 광도는 100, 200, $300{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$로 처리하였고, 광주기는 12/12, 18/6, 24/0(명기/암기)으로 처리하였다. 온도는 $21{\pm}2^{\circ}C$, 상대습도는 $60{\pm}10%$로 조절하여 22일간 재배하였다. 엽폭과 엽장, 생체중과 건물중, 총 안토시아닌 함량은 24/0(명기/암기) 처리에서 좋았다. 최대근장, 생체중과 건물중, 엽수는 100, $300{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$보다 $200{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ 처리에서 좋았다. 엽록소는 광주기 18/6과 24/0 처리 보다 12/12(명기/암기) 처리에서 높았다. 본 실험의 결과로 광도는 200, $300{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, 광주기는 12/12 또는 18/6(명기/암기) 처리를 하는 것이 좋을 것으로 판단된다.

• 자원ㆍ환경경제연구
• /
• 제13권3호
• /
• pp.441-468
• /
• 2004

환경($CO_2$) 혼합형 산업연관모형을 이용하여 우리나라의 수출상품에 체화된 $CO_2$ 배출량을 추정하였다. 혼합모형은 투입되는 모든 재화의 단위금액으로 하는 전통적인 투입산출모형에서 에너지 부문의 투입을 실물단위로 바꿔주는 것이다. 추정결과 2000년의 경우 225조 3,000억 원 어치 비에너지 상품 수출로 인한 $CO_2$ 배출량은 5,188만 탄소톤으로 우리나라 전체 $CO_2$ 배출량의 44%를 차지한다. 수출상품의 $CO_2$ 배출집약도는 0.227탄소톤/백만원으로 나타났다. 현재 진행되고 있는 기후변화협약에서는 $CO_2$ 배출의 책임을 생산국 기준으로 하고 있다. 이러한 방식은 온실가스의 배출 책임이 상품 수입국에서 상품 수출국으로 전가된 것으로 볼 수 있다. 더 큰 문제는 앞으로 많은 나라들이 탄소집약적 상품 생산을 기피하고 수입에 의존하려 하게 하는 '탄소누출' 현상이다. 이 같은 문제점을 방지할 수 있는 대안은 상품 생산의 수출국보다는 소비국에도 $CO_2$ 배출의 책임을 묻는 것이다. 이는 사용자 책임원칙과 오염자부담원칙에도 부합하는 것이며, 이 원칙이 적용되면 지구온난화 방지를 위한 기후변화협약의 실효성을 높이는 역할을 할 수 있을 것이다.

• Journal of Applied Biological Chemistry
• /
• 제64권4호
• /
• pp.351-356
• /
• 2021

환경 조건의 변화는 식물의 물과 양분 흡수 및 광합성 정도를 변화시켜 결과적으로 식물 생육에 영향을 미친다. 변화하는 환경 조건에서 식물의 생리적 반응은 식물 줄기에 전극을 삽입해 식물유도 전기신호(PIES)로 비파괴적으로 모니터링할 수 있다. 본 연구의 목적은 CO₂ 증가와 광합성 광량자속밀도 PPFD 감소에 따른 식물의 반응으로 PIES를 모니터링하는 것이다. PIES는 증산과 광합성이 일어나는 낮에 증가하였고 식물 생육 기간 동안 모니터링한 CO₂ 농도는 PIES와 음의 상관관계를 보였다. CO₂ 농도 증가는 PIES를 약간 감소시켰으나 PIES에 큰 영향을 미치지 않았으며 이는 CO₂ 증가의 효과가 낮은 PPFD에 의해 제한되었기 때문으로 판단된다. PPFD 감소의 효과는 물과 양분 흡수가 광에 의해 즉각적으로 영향을 받지 않았기 때문에 즉시 나타나지는 않았다. 본 연구는 CO₂ 증가와 PPFD 감소에 의한 식물의 단기적 반응을 평가하고자 한 것이며 프롤린 함량 및 엽록소 형광은 환경 변화에 따라 유의하게 변화하지는 않았다.

• KSBB Journal
• /
• 제27권2호
• /
• pp.97-102
• /
• 2012

In the present study, the biomass productivity of two green microalgae (Chlorella sp. and Dunaliella salina DCCBC2) were assessed in a 12 L tubular photobioreactor under optimum culture conditions. In the batch culture optimization process, the Chlorella sp. biomass was obtained as 1.2 g/L under atmospheric air as a sole $CO_2$ source and other culture conditions as follows: light intensity, temperature, pH, $NH_4Cl$ and $K_2HPO_4$ were 100 ${\mu}E/m^2/s$, $27^{\circ}C$, 7.0, 20.0 mM and 2.0 mM, respectively. On the other hand, 2.9 g/L of D. salina DCCBC2 biomass production was observed under the following conditions: light intensity, temperature, pH, $KNO_3$ and $K_2HPO_4$were 80 ${\mu}E/m^2/s$, $27^{\circ}C$, 8.0, 3.0 mM and 0.025 mM, respectively. At 1% $CO_2$ supply to the reactor, the Chlorella sp. production was reached 1.53 g/L with 25% increment under the same operating conditions. In addition, the maximum D. salina DCCBC2 biomass was observed as 3.40 g/L at 3% $CO_2$ concentration. Based on the aforementioned optimized conditions, the dilution rate and maximal biomass productivity of Chlorella sp. and D. salina DCCBC2 in the continuous cultivation were 0.4/d and 0.6 g/L/d and 0.6/d and 1.5 g/L/d, respectively.

• Journal of Ceramic Processing Research
• /
• 제13권spc2호
• /
• pp.270-273
• /
• 2012

x mol% (x = 0 ~ 20) Na2CO3 excess Bi2.5Na3.5Nb5O18 (BNN) particles were synthesized using molten salt as a flux. The secondary phases were observed at stoichiometric ratio of BNN precursors and their intensity decreased with increasing Na contents. The results of SEM images showed that all particles existed in a platelet shape and the particle increased in size with higher increasing Na contents. Plate-like NaNbO3 particles were developed using BNN precursor obtained by a topochemical microcrystal conversion. XRD analysis of NaNbO3 particles showed that a single perovskite phase and the intensity of (h00) peaks increased with increasing Na contents in BNN precursor. SEM images showed that the size of plate-like NaNbO3 was significantly changed by controlling Na contents in BNN precursors.

• 한국기후변화학회지
• /
• 제8권3호
• /
• pp.213-220
• /
• 2017

The purpose of this study is to analyze effects of Greenhouse Gas (GHG) emission reduction in district energy business mainly based on Combined Heat and Power (CHP) plants. Firstly this paper compares the actual carbon intensity of power production between conventional power plants and district energy plants. To allocate the GHG from CHP plants, two of different methods which were Alternative Generation Method and Power Bonus Method, have been investigated. The carbon intensity of power production in district energy plants ($0.43tonCO_2e/MWh$) was relatively lower than conventional gas-fired power plants ($0.52tonCO_2e/MWh$). Secondly we assessed the cost effectiveness of reduction by district energy sector compared to the other means using TIMES model method. We find that GHG marginal abatement cost of 'expand CHP' scenario (-$134/ton$CO_2$) is even below than renewable energy scenario such as photovoltaic power generation ($87/ton$CO_2$). Finally the GHG emission reduction potential was reviewed on the projected GHG emission emitted when the same amount of energy produced in combination of conventional power plants and individual boilers as substitution of district energy. It showed there were 10.1~41.8% of GHG emission reduction potential in district energy compared to the combination of conventional power plants and individual boilers.

• Journal of Welding and Joining
• /
• 제21권7호
• /
• pp.34-41
• /
• 2003

Weld quality monitoring and seam tracking along the butt-joint lengthwise to the tube axis are studied. The material of tube is 60kg/$\textrm{mm}^2$ grade steel sheet, and the longitudinal butt-joint is shaped by 2 roll bending machine. The tube with a thickness of 1.5mm, diameter of 105.4mm and length of 2000mm is successfully obtained by the $CO_2$ laser welding system equipped with a seam tracker and plasma sensor. Experimental results show that the developed welding system can be used for the precision seam tracking and the real-time monitoring of weld quality, and the laser welded tube can be used for car body md component after tubular hydroforming.