• 한국주조공학회지
• /
• 제31권5호
• /
• pp.274-283
• /
• 2011

The vacuum die casting is a promising candidate of the stamping process for fabrication of fuel cell bipolar plate due to its advantages, such as precision casting, mass production and short production time. This study proposes vacuum die casting process to fabricate bipolar plates in fuel cell. Bipolar plates were fabricated under various injection conditions such as molten metal temperature and injection velocity. Also, according to injection velocity conditions, simulation results of MAGMA soft were compared to the experimental results. In case of melt temperature $650^{\circ}C$, misrun occurred. When the melt temperature was $730^{\circ}C$, mechanical properties were low due to dendrite microstructure. Injection velocity has to set at more than 2.0 m/s to fabricate the sound sample. When melt temperature, injection velocity (Fast shot), and vacuum pressure are $700^{\circ}C$, 2.5 m/s and 30 kPa respectively, sample had good formability and few casting defects. Simulation results are mostly in agreement with experimental results.

• 오토저널
• /
• 제9권5호
• /
• pp.66-76
• /
• 1987

The control technique for an electronic engine is studied. For this study an IBM-PC and a throttle body fuel injection system are selected. The computer controls fuel injection, spark timing, exhaust gas recirculation and idle speed. Fuel injection is adjusted either by a feed back signal of a zirconia $O_{2}$ sensor or programmed logic for starting, deceleration, warm ing up and idle modes. When a 3-way catalytic converter is used with the electronic engine control system, CO, THC, and NOx were reduced more than 90% simultaneously.

• 한국산학기술학회논문지
• /
• 제21권7호
• /
• pp.692-698
• /
• 2020

본 논문은 커먼레일 단기통 디젤엔진에서 다단 파일럿 분할 분사 전략이 연소 및 배기가스 배출특성에 미치는 영향을 분석하는 데 초점을 두었다. 실린더 내부 최고 압력과 열발생률은 단일분사 조건에서 가장 높았으며, 파일럿 분사량이 균등하게 분할되어 분사 횟수가 증가할수록 감소하는 경향으로 나타났다. IMEP, 엔진 토크 및 연소 효율은 1단 파일럿 분사 조건에서 가장 낮게 나타나는 특성을 보였으나, 다단 파일럿 분할 분사 전략 적용 시 증가하는 경향으로 분석되었다. COV_IMEP는 연소 효율이 가장 낮은 1단 파일럿 분사 조건에서 가장 높았으며, 이는 연소 안정성이 낮다는 것을 의미한다. 배기가스 중 산소농도는 단일분사 조건에서 가장 낮았고, 이산화탄소는 가장 높게 배출되는 특성을 보였다. 다단 분할 분사 전략 적용 시 저온 연소과정이 진행되기 때문에 일산화탄소의 산화율은 낮아지게 되고 배출수준은 증가하는 특성을 보였다. 탄화수소는 국부적으로 농후한 혼합기가 형성되는 단일분사 조건에서 가장 높은 결과를 보였다. 질소산화물은 다단 파일럿 분할 분사 전략 중 3단 파일럿 분사 조건에서 55.6%까지 감소하는 특성을 보였다.

• 대한기계학회논문집
• /
• 제11권5호
• /
• pp.819-827
• /
• 1987

본 연구에서는 예혼합화염에 물을 촘가하였을 때의 물/연료 체적비에 따른 화 염온도, 불완전가스농도(CO, THC, H$_{2}$), soot 농도를 측정하여 물이 연소효율에 미치는 영향을 고찰하고자 한다.

• 대한기계학회논문집
• /
• 제19권2호
• /
• pp.591-596
• /
• 1995

In order to investigate the reduction of NO emissions, natural gas was fueled for two-stage combustion apparatus. NO and CO emissions were described by five variables: total air ratio, primary air ratio, secondary air injection position, secondary air injection velocity, and swirl ratio. It was mainly observed that, as the primary air ratios of 0 and 0.4 NO emission decreased with increasing the secondary air injection position and secondary air injection velocity. The effect of weak swirl on NO emission was found to be insignificant.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2010년도 임시총회 및 하계학술연구발표회
• /
• pp.96-96
• /
• 2010

We report the proper resistance-area products in the single crystalline bcc CoFe/MgO tunnel contact on nondegenerate n-Ge desirable for efficient spin injection and detection at room temperature. The electric properties of the crystalline CoFe(5 nm)/MgO(1.5,2.0,2.5 nm)/n-Ge(001) tunnel contacts have been investigated by I-V-T and C-V measurements. Interestingly, the tunnel contact with the 2-nm MgO exhibits the ohmic behavior with low resistance-area products, satisfying the theoretical conditions required for significant spin injection and detection. This result is ascribed to the presence of MgO layer between CoFe and n-Ge, enhancing the Schottky pinning parameter as well as shifting the charge neutrality level.

• 대한수의학회지
• /
• 제46권1호
• /
• pp.43-46
• /
• 2006

A 6-month-old thoroughbred filly foal had torticollis and circled towards the right side. A local veterinarian treated her twice using dexamethasone for 1 week but there was little clinical improvement. Needles were inserted into Ting points of both hind limb and one ocular acupoint (shang jiao area from GB01). Injection acupuncture (dexamethasone, twice/week) was used at GV16, GB20, BL10 and LU07, for the neck and head. Acupoint GB34 was added to those points at session 4. In addition, a trigger point in the left neck was injected with 0.2 ml ($200{\mu}g$ of apitoxin) of bee-venom diluted with 1 ml of 2% lidocaine from session 1 to session 3. At session 2, the symptoms had ameliorated a little. At session 3, they were much improved; the right ear was completely normal and the neck could be moved about 60% of normal range. At session 4, nodding was possible and stiffness of the neck was much improved, having returned to about 80% of normal range. Three days after session 4, the symptom of torticollis had disappeared completely and the foal could walk in a straight line. In conclusion, the present patient was a case with equine torticollis which showed favourable therapeutic response by combination of needle-acupuncture plus injection-acupuncture with dexamethasone and apitoxin.

• Journal of Mechanical Science and Technology
• /
• 제19권5호
• /
• pp.1216-1225
• /
• 2005

$CO_{2}$ ocean sequestration is one of the promising options to reduce $CO_{2}$ concentration in the atmosphere because the ocean has vast capacity for $CO_{2}$ absorption. Therefore, in the present investigation, calculations for solubility and dissolution behavior of liquid $CO_{2}$ droplets released at 1000 m and 1500 m deep in the ocean from a moving ship and a fixed pipeline have been carried out in order to estimate the $CO_{2}$ dissolution characteristics in the ocean. The results show liquid $CO_{2}$ becomes bubble at around 500 m in depth, and the solubility of seawater is about $5{\%}$ less than of pure water. Also, it is shown that the injection of liquid from a moving ship is a more effective method for dissolution than from a fixed pipeline, and the presence of hydrate on liquid $CO_{2}$ acts as a resistant layer in dissolving liquid $CO_{2}$.

• 한국세라믹학회지
• /
• 제43권8호
• /
• pp.469-471
• /
• 2006

The effects of $Cr_2O_3$ on the microstructural evolution and mechanical properties of $Al_2O_3$ polycrystalline were investigated. The microstructure of $Al_2O_3-Cr_2O_3$ composites (ruby) was carefully controlled in order to obtain dense and fine-grained ceramics, thereby improving their properties and reliability with respect to numerous applications related to semiconductor bonding technology. Ruby composites were produced by Ceramic Injection Molding (CIM) technology. Room temperature strength, hardness, Young's modulus and toughness were determined, as well as surface strengthening induced by thermal treatment and production of a fine-grained homogenous microstructure.

• 자원환경지질
• /
• 제54권1호
• /
• pp.69-76
• /
• 2021

이 연구에서는 포항분지 영일층군 덮개암 시료의 광물학적 특성을 파악하고, 이산화탄소 주입으로 인해 발생할 수 있는 물-암석-가스의 상호작용을 지화학 모델링을 이용하여 규명하였다. 이를 위하여 XRD, MICP, BET 분석을 실시하여 덮개암의 광물암석학적 및 공극 특성을 파악하였고, 광물학적 연구 결과와 공극수의 물리화학적 변수 자료들을 이용하여 이산화탄소 주입 후 단기간 변화와 장기간 영향을 파악하기 위하여 두 단계의 지화학 모델링(The Geochemist's Workbench 14.0.1)을 수행하였다. 연구 결과, 포항분지 영일층군의 덮개암은 석영, 알바이트, K-장석으로 주로 구성되어 있고, 소량의 백운모, 황철석, 방해석, 카올리나이트, 몬모릴로나이트로 이루어져 있다. 지화학 모델링 결과, 이산화탄소의 주입 후 덮개암은 방해석의 용해로 인해 공극률이 증가하고 알바이트와 K-장석의 용해 결과 도소나이트와 은미정질 실리카(칼세도니)가 침전되었다. 주입이 완료된 두 번째 단계에서는 방해석과 알바이트의 용해 결과 도소나이트와 은미정질 실리카(칼세도니)의 침전이 일어나며, 이 반응으로 인해 pH는 증가하였다. 또한 덮개암에서 이산화탄소를 포획할 수 있는 광물은 도소나이트 임을 알 수 있었다. 이러한 연구 결과는 장기간의 이산화탄소 지중 저장에 있어 광물 포획의 효율성을 정량적으로 평가하는 자료로 활용될 수 있을 것으로 판단된다.