• 제목/요약/키워드: $CO_2$ hydrate

검색결과 129건 처리시간 0.03초

알칼리 자극제(刺戟劑)에 의해 고로(讀爐) 수쇄(水碎) 슬래그의 주위(周圍)에 형성(形成)된 Reaction Rim의 특성(特性) (Properties of Reaction Rim on Blast Furnace Slag Grain with Alkali Activator according to Hydration Reaction)

  • 이승헌;문영범
    • 자원리싸이클링
    • /
    • 제18권3호
    • /
    • pp.42-48
    • /
    • 2009
  • 고로 수쇄 슬래그에 알칼리 자극제(NaOH+$Na_2O.SiO_2$)를 첨가한 계는 보통 포틀랜드 시멘트의 수화반응과 다르게, 수화반응 초기에 높은 농도의 $OH^-,\;[SiO_4]^{4-}$ 이온이 존재하게 되므로, 유도기가 없이 수화반응이 빠르게 진행되며, 슬래그 입자 주위에 수화물에 의한 reaction rim을 형성한다 반응기간 1일부터 고로 수쇄 슬래그 입자 주위에 $0.6{\mu}m$의 reaction rim이 형성되었고, 반응기간이 증가함에 따라 reaction rim의 두께는 증가하여 28일에 $1{\mu}m$으로 성장하였으며, 미반응 고로 수쇄 슬래그 입자는 각진 형태에서 구형의 형태로 변화되었다. 슬래그 입자의 내부로부터 reaction rim으로 갈수록 Ca/Si의 몰비는 감소하는 경향을 나타냈었다. 그리고 반응기간이 경과할수록 슬래그 입자 내부와 reaction rim간의 Ca/Si 몰비 차이는 작아졌으며, 생성된 수화물은 저결정성의 Ca/Si 몰비가 1.5 미만인 CSH(I)이었다.

비정질 루테늄 산화물을 사용한 수계 Supercapacitor의 전기화학적 특성 (Electrochemical Characteristics of Supercapacitor Based on Amorphous Ruthenium Oxide In Aqueous Acidic Medium)

  • 최상진;도칠훈;문성인;윤문수;육경창;김상길
    • 전기화학회지
    • /
    • 제5권1호
    • /
    • pp.21-26
    • /
    • 2002
  • 비정질 루테늄 산화물을 사용한 수퍼캐패시터를 개발하였다. 삼염화루테늄 수화물$(RuCl_3{\cdot}xH_2O)$로부터 제조한 비정질의 이산화루테늄 수화물$(RuO_2{\cdot}nH_2O)$을 사용하여 수퍼캐패시터 전극을 제조하였다. 집전체로는 티타늄 및 STS 304박막에 비해 보다 넓은 전위창을 가지는 탄탈륨 박막을 사용하였다. 제조한 전극과 4.8M 황산 전해액을 사용하여 수퍼캐패시터를 제조하였다. 전극의 비정전용량은 순환전위전류분석에서 미분 최대 값으로 산화 및 환원 과정 각각 710 및 $645\;F/g-RuO_2{\cdot}nH_2O$이었으며, 평균값은 $521\;F/g-RuO_2{\cdot}nH_2O$으로 나타났다. 수퍼캐패시터를 포화카로멜기준전극에 대하여 0.5 V로 protonation level을 조정하고, 충방전 시험한 바, $151\;F/g-RuO_2{\cdot}nH_2O$의 비정전용량을 나타내었다.

Characteristics of Hydration and Correlation on Cement-Based Thermal Insulation Material

  • Kim, Tae Yeon;Jo, Ki Sic;Chu, Yong Sik
    • 한국세라믹학회지
    • /
    • 제56권5호
    • /
    • pp.489-496
    • /
    • 2019
  • Cement-based thermal insulation material was manufactured using OPC, lime, anhydrite, and CSA cement in this study. The morphology and physical properties of the material were analyzed using XRD. All samples had ettringite, Ca(OH)2, and CaCO3 crystals. The XRD peak intensity of the ettringite and Ca(OH)2 slightly increased with an increase in curing time from 3 to 7 days. The compressive strength values at 28 days of specimens 1-8 were in the range of 0.25-0.32 MPa, and the compressive strength values of specimens 3-8 were > 0.3 MPa. The coefficients of correlation between compressive strength and apparent gravity at 7 days and those between compressive strength and ettringite/Ca(OH)2 XRD peak intensity at 28 days were above 0.8. That is, the compressive strength exhibited an influence on apparent gravity at 7 days and on hydrate at 28 days. The thermal conductivity of all specimens was 0.041-0.045 W/mK, and the highest value of thermal conductivity was shown by specimen 5. The coefficient of correlation between apparent gravity and thermal conductivity was 0.84. It was concluded that control of raw materials and hydrates must be considered for manufacturing of insulation materials. The cement-based thermal insulation material in this study could be used in construction fields.

루테늄 산화물-수계 전해액 수퍼캐패시터의 전위 특성 (Potential Characteristics of Supercapacitor Based on Ruthenium Oxide-Aqueous Electrolyte)

  • 도칠훈;최상진;문성인;윤문수;육경창;김상길;이주원
    • 전기화학회지
    • /
    • 제6권2호
    • /
    • pp.93-97
    • /
    • 2003
  • [ $RuCI_3{\cdot}xH_2O$ ]로부터 제조한 비정질의 $RuO_2{\cdot}nH_2O$을 사용하여 탄탈륨 집전체상의 수퍼캐패시터 전극을 제조하였다. $RuO_2{\cdot}nH_2O$ 전극과 4.8 M 황산 전해액을 사용하여 $RuO_2$ 수퍼캐패시터를 제조하였다. 탄탈륨 박막은 0.0-1.1 V(vs.SCE)에서 안정적임을 AC impedance로 확인하고 수퍼캐패시터에 적용하였다. 루테늄 산화물 수퍼캐패시터는 약 1.0 V(vs. SCE)이상에서 비가역 가수분해 반응이 진행되었다 수퍼캐패시터를 0.5V(vs. SCE)의 protonation leve을 조정하고, 전압범위를 1V로 하여 충방전 시험할 경우 우수한 특성을 나타내었다. 이때 전극전위는 $-0.004\~0.995V(vs.SCE)$의 범위이고 positive 전극 및 negative 전극의 전위범위는 각각 $-0.004\~0.515V(vs.SCE)$$-0.515\~0.995V(vs.SCE)$이었다.

Liquid Boar Sperm Quality during Storage and In vitro Fertilization and Culture of Pig Oocytes

  • Park, C.S.;Kim, M.Y.;Yi, Y.J.;Chang, Y.J.;Lee, S.H.;Lee, J.J.;Kim, M.C.;Jin, D.I.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제17권10호
    • /
    • pp.1369-1373
    • /
    • 2004
  • The percentages of sperm motility and normal acrosome on the liquid boar semen diluted and preserved at $4^{\circ}C$ with lactose hydrate, egg yolk and N-acetyl-D-glucosamine (LEN) diluent were significant differences according to preservation day and incubation time, respectively. The sperm motility steadily declined from 96.9% at 0.5 h incubation to 78.8% at 6 h incubation at 1 day of preservation. However, the sperm motility rapidly declined after 4 day of preservation during incubation. The normal acrosome steadily declined from 93.3% at 0.5 h incubation to 73.8% at 6 h incubation at 1 day of preservation. However, the normal acrosome rapidly declined after 3 day of preservation during incubation. The rates of sperm penetration and polyspermy were higher in 5 and $10{\times}10^6$ sperm/ml than in 0.2 and $1{\times}10^6$ sperm/ml. Mean numbers of sperm in penetrated oocyte were highest in $10{\times}10^6$ sperm/ml compared with other sperm concentrations. The rates of blastocysts from the cleaved oocytes (2-4 cell stage) were highest in $1{\times}10^6$sperm/ml compared with other sperm concentrations. In conclusion, we found out that liquid boar sperm stored at $4^{\circ}C$ could be used for in vitro fertilization of pig oocytes matured in vitro. Also, we recommend $1{\times}10^6$sperm/ml concentration for in vitro fertilization of pig oocytes.

열수처리에 의해 석출된 HA 결정이 Ti-6Al-7Nb 합금의 생체활성에 미치는 영향 (Effect of HA Crystals Precipitated by Hydrothermal-Treatment on the Bioactivity of Ti-6Al-7Nb Alloy)

  • 권오성;최석규;문장원;이민호;배태성;이오연
    • 한국재료학회지
    • /
    • 제14권9호
    • /
    • pp.607-613
    • /
    • 2004
  • This study was to investigate the surface properties of electrochemically oxidized Ti-6Al-7Nb alloy by anodic spark discharge technique. Anodizing was performed at current density 30 $mA/cm^2$ up to 300 V in electrolyte solutions containing $DL-{\alpha}$-glycerophosphate disodium salt hydrate($DL-{\alpha}$-GP) and calcium acetate (CA). Hydrothermal treatment was done at $300^{\circ}C$ for 2 hrs to produce a thin outermost layer of hydroxyapatite (HA). The bioactivity was evaluated from HA formation on the surfaces in a Hanks' solution with pH 7.4 at $36.5^{\circ}C$ for 30 days. The size of micropores and the thickness of oxide film increased and complicated multilayer by increasing the spark forming voltage. Needle-like HA crystals were observed on anodic oxide film after the hydrothermal treatment at $300^{\circ}C$ for 2 hrs. When increasing $DL-{\alpha}$-GP in electrolyte composition, the precipitated HA crystals showed the shape of thick and shorter rod. However, when increasing CA, the more fine needle shape HA crystals were appeared. The bioactivity in Hanks' solution was accelerated when the oxide films composed with strong anatase peak with presence of rutile peak. The increase of amount of Ca and P was observed in groups having bioactivity in Hanks' solution. The Ca/P ratio of the precipitated HA layer was equivalent to that of HA crystal and it was closer to 1.67 as increasing the immersion time in Hanks' solution.

배수공 내 스케일 생성 방지 기술의 현장 적용성 평가 (Field Applicability of Scale Prevention Technologies for Drainage Holes)

  • 주익찬;이종휘;김현기;김경민;천병식
    • 한국지반환경공학회 논문집
    • /
    • 제13권9호
    • /
    • pp.45-51
    • /
    • 2012
  • 터널 내로 유입되는 지하수에 의해 시멘트 수화물인 수산화칼슘$(Ca(OH)_2)$이 토중의 미생물 반응, 유기물의 산화 등에 의해 발생되는 이산화탄소$(CO_2)$와 차량의 배기가스$(SO_3)$ 등과 반응하여 그 반응물이 터널 상부에 설치된 배수공 내에 침전됨으로 인하여 배수공 클로깅 현상이 발생하게 된다. 이러한 현상으로 인하여 터널 배수 시스템의 수리기능저하가 발생하게 되면 간극수압이 증가 하여 누수를 가속화 시키며, 라이닝의 열화를 초래하게 된다. 본 연구는 배수공 클로깅 현상을 방지하기 위하여 퀀텀스틱과 자화장치를 개발하였으며 서울 남산 ${\bigcirc}{\bigcirc}$ 터널과 지하철 ${\bigcirc}{\bigcirc}{\bigcirc}$ 공구에서의 현장실험을 통하여 위 기술의 현장 적용성을 규명하는데 그 목적이 있다. 배수공에 요소기술을 적용한 배수관을 삽입한 후 주기적으로 육안관측을 수행하였고 최종적으로 발생된 스케일의 SEM 및 XRD 분석을 수행하였다. 그 결과 요소기술을 적용하였을 경우 스케일 생성량이 현저히 줄었으며, 특히 퀀텀스틱이 자화장 치에 비하여 그 효과가 우수하였다. 따라서 기존의 노후터널 배수공에 퀀텀스틱 또는 자화장치를 배수공에 적용하였을 경우, 배수공 의 클로깅 현상을 어느 정도 저감시킬 수 있을 것으로 판단된다.

알칼라인 하이드라진 연료전지 운전 안정성을 위한 전극 구조 (Effective Electrode Structure for the Stability of Alkaline Hydrazine Fuel Cells)

  • 엄성현;홍수직;이재영
    • 공업화학
    • /
    • 제30권6호
    • /
    • pp.652-658
    • /
    • 2019
  • 하이드라진 직접 액체 연료전지는 이산화탄소를 배출하지 않으며, 높은 에너지 밀도를 가지고, 귀금속 촉매를 사용하지 않고도 높은 촉매 활성을 보이는 장점으로 유망한 연료전지로써 활발히 연구가 진행되어 왔다. 하지만, 고안전성 연료전지 운전 성능을 위해서는 전극촉매를 비롯한 핵심소재 개발 및 성능 연구를 토대로 연료의 물질전달 특성을 비롯한 하이드라진 연료전지 내에서 진행되고 있는 작동 프로세스를 충분히 이해할 필요성이 있다. 본 논문에서는 최근의 직접 하이드라진 연료전지 연구결과 중에 가격 경쟁력을 확보한 전극촉매 및 연료 확산, 물 관리, 기체 발생 측면에서 전극 구조 개발 동향을 소개하며 향후 개발 방향에 대해서 고찰하고자 한다.

오일 스크러버 및 집진장치를 통한 바이오매스 가스화 공정 발생 타르 및 입자 제거 연구 (Simultaneous Treatment of Tar and Particles Using Oil Scrubber and Bag Filter in Biomass Gasification)

  • 김준엽;조영민;김상범
    • 공업화학
    • /
    • 제30권6호
    • /
    • pp.712-718
    • /
    • 2019
  • 가스화(gasification)는 바이오매스로부터 에너지를 얻을 수 있는 방법 중 하나로 열화학적 변환을 통해 수소, 일산화탄소, 메탄 등으로 조성된 가연성 가스인 'producer gas'를 생산할 수 있다. 하지만 producer gas와 함께 타르(tar)를 비롯한 ash 등의 입자상 물질이 함께 생성돼, 발전 터빈이나 연소 엔진 등에 유입되어 고장을 일으키거나 배관 등에 축적되어 막힘 현상 등을 야기하므로 제거가 필요하다. 본 연구에서는 producer gas 중 타르 및 입자 제거를 위해 오일 스크러버(oil scrubber)와 집진장치를 도입하였다. 흡수용매로써 타르를 효과적으로 제거가 가능한 대두유를 사용하였고, 스크러버의 용매 온도에 따라 제거효율이 어떻게 변화하는지 실험을 통해 관찰하였다. 집진장치에는 타르로 인한 필터 눈 막힘 현상 등의 문제를 방지하기 위해 pre-coating 기술을 도입하였다. Pre-coating에 사용할 물질로써 분말 소석회와 목탄계 활성탄(wood char)을 사용하였으며, 타르(tar)를 비롯한 입자 평균 제거 효율은 소석회를 pre-coating 물질로 사용 시 86%, 활성탄의 경우 80%로 나타났다. 스크러버와 집진장치를 동시에 사용한 경우에는 평균 제거효율이 소석회는 88%, 활성탄의 경우 83%로 나타났다.

구아노신일인산의 결정화에 대한 수용성 고분자의 영향 (Influence of Water Soluble Polymers on Crystallization of 5-Guanosine Monophosphate)

  • 이민경;최혜민;김우식;홍종팔;이종휘
    • 폴리머
    • /
    • 제33권2호
    • /
    • pp.124-130
    • /
    • 2009
  • 고분자를 저분자 유기물질의 결정화 과정에 사용하면 결정형성과정을 중간 단계, 즉 메조크리스탈 단계에서 멈출 수 있다. 메조크리스탈은 수백 나노미터-수 마이크로미터의 결정들이 스스로 배열되어 결정성을 갖는, 결정과 고분자의 복합초구조로 정의할 수 있다. 본 연구에서는 구아노신일인산의 메조크리스탈 형성에서 고분자의 영향과 그와 관련된 변수들에 대해 알아 보았다. OM과 SEM 분석을 통해 고분자유도 결정화에 의한 GMP 결정은 전형적인 GMP입자와는 다른 모폴로지를 보임을 확인하였고, XRD 분석을 통해 새로운 polymorph를 가짐을 확인하였다. 이러한 결과는 고분자에 의해 GMP의 결정구조가 달라졌음을 의미하며, 결정 안에 함유되는 물의 함량이 달라져 다른 수화물 구조를 보임을 TGA 분석을 통해 확인하였다.