• Proceedings of the KWS Conference
• /
• 2001.10a
• /
• pp.128-131
• /
• 2001

Laser cladding processing allows rapid transfer of heat to the material being processed with minimum conduction into base metal, resulting in low total heat input. The effects of $CO_2$ laser cladding with powder feeding on mechanical properties of VERSAlloy were studied. Their low melting point (under 1093$^{\circ}C$) enables overlays to be applied with minimum dilution and base metal distortion. Experiment results indicated that powder feeding speed and quantity were important for laser cladding with powder feeding. The powder feeding speed should be adapted according to cladding speed for good shaping of clad layer. The effect of heat on the HAZ size can be limited and the growth of grain size of HAZ size was not serious.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.2
• /
• pp.313-319
• /
• 2007

The nutritional medium requirement for biosurfactant production by Bacillus licheniformis K51 was optimized. The important medium components, identified by the initial screening method of Plackett-Burman, were $H_3PO_4,\;CaCl_2,H_3BO_3$, and Na-EDTA. Box-Behnken response surface methodology was applied to further optimize biosurfactant production. The optimal concentrations for higher production of biosurfactants were (g/l): glucose, $1.1;NaNO_3,\;4.4;MgSO_4{\cdot}7H_2O,\;0.8;KCl,\;0.4;CaCl_2,\;0.27;H_3PO_4,\;1.0ml/l;\;and\;trace elements\;(mg/l):H_3BO_3,\;0.25;CuSO_4,\;0.6;MnSO_4,\;2.2;Na_{2}MoO_4,\;0.5;ZnSO_4,\;6.0;FeSO_4,\;8.0;CoCL_2,\;1.0;$ and Na-EDTA, 30.0. Using this statistical optimization method, the relative biosurfactant yield as critical micelle dilution (CMD) was increased from $10{\times}\;to\;105{\times}$, which is ten times higher than the non-optimized rich medium.

• Journal of Embryo Transfer
• /
• v.13 no.1
• /
• pp.1-9
• /
• 1998

In order to improve the cryopreservation by vitrification or slow freezing of nuclear transplant rabbit embryos, the effects of factors affecting embryo cryopreservation such as cryoprotectants, equilibration, cooling rate and post-thaw dilution on post-thaw survial and development were determined using intact embryos of morular stage. And the post-thaw development of nuclear transplanted embryos cryopreserved under the optimal conditions examined was compared between vitrification and slow freezing. The cryoprotectant solution used was ethyleneglycol-ficoll-sucrose (EFS) or ethyleneglycol-poly-vinylpyrrolidone-galactose- I (EPG- I ) for vitrification, and EPG- II for slow freezing. To examine the viability of frozen-thawed embryos, the nuclear transplanted embryos were co-cultured in TCM-199 plus 10% FBS with bovine oviduct epithelial cells(BOEC) for 24 hrs and the intact morulae were co-cultured with BOEC for 5 days and 3 days to hatching blastocyst stage in 39 ˚C 5% $CO_2$ incubator. The results obtained were as follows: Following vitrification with EFS, the post-thaw development of rabbit morulae to hatching blastocyst was significantly(P<0.05) higher in compacted stage(82.4%) than in early morular stage(60.0%). The post-thaw development of compacted morulae to hatching blastocyst was similarly high in vitrification with EFS(82.4%), EPG- I (85.0%) and in slow freezing with EPG- II (83.3%). Following vitrification with EPG- I, the post-thaw development of intact rabbit morulae to hatching blastocyst was similar as 78.0% and 85.0% in 1-step and 2-step post-thaw dilution, respectively. The post-thaw development of nuclear transplanted rabbit embryos of compacted morulae stage to hatching blastocyst was similarly 43.6% and 40.0% in vitrification with EPG- Iand slow freezing with EPG- II, respectively. These results indicated that the rabbit nuclear transplant and intact embryos of morulae stage could be well cryopreserved with either vitrification or slow freezing procedure.

• Corrosion Science and Technology
• /
• v.2 no.6
• /
• pp.260-265
• /
• 2003

The experimental methods to rapidly and stably reproduce Microbially Influenced Corrosion (MIC) of stainless steel by sulfate-reducing bacteria such as Desulfovibrio vulgaris were developed. In this study, using two types of stainless steel, 304 and 444, obtained from Pohang Steel & Iron Co., Ltd. (POSCO)., three major factors were tested; overall medium composition, dilution ratio, and chloride concentration. In the overall medium tests, three different media were prepared according to $FeSO_4$ concentration; PM (original Postgate's medium No. 2), MPM 1 (modified PM, no $FeSO_4$, MPM 2 (modified PM, 1/10 $FeSO_4$). The effects of various dilution ratios (3, 1, 1/3, 1/10, 1/30, and 1/100 times) and chloride concentrations (0.0067M, 0.01M, 0.05M, and 0.1M) were examined during 2 months cultivation. Through SEM (Scanning Electron Microscopy) observation, the diluted and modified media, particularly the $1/3{\times}MPM$ I medium, showed more micro-pitting points on surfaces compared to the original PM medium. High concentrations of chloride ions (above 0.05M) were not adequate for observation of MIC since those brought about non-microbiologically induced corrosion. From this study, the optimization of medium composition was very effective to routinely observe MIC in a laboratory system.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.10
• /
• pp.1458-1464
• /
• 2002

$CO_2$ is well known greenhouse gas which is the major source of global warming. Reducing $CO_2$ emission in combustion process can be achieved by increasing combustion efficiency, oxygen enriched combustion and recirculation of the emitted $CO_2$ gas. Stability of non-premixed flame in oxygen enriched environment will be affected by the amount of oxygen, kind of diluents and fuel exit velocity. The effects of these parameters on flame liftoff and blowout are studied experimentally oxidizer coflowing burner. Experiments were divided into three cases according as where $CO_2$gas was supplied. - 1) to coflowing air, 2) to fuel with 0$_2$-$N_2$ coflow, 3) to coflowing oxygen. Flame in air coflowing case was lifted in turbulent region. Flame lift and blowout in laminar region with the increase in $CO_2$ volume fraction in $CO_2$-Air mixture makes flame lift and blowout in laminar region. Increase in oxygen volume fraction makes flame stable-i.e. flame liftoff and blowout occur at higher fuel flowrates. Liftoff height was non-linear function of nozzle exit velocity and affected by the $O_2$ volume fraction. It was found that the flame in $O_2$-$N_2$ coflow case was more stable than $O_2$-$CO_2$ case, Liftoff heights vs (nozzle exit velocity/laminar burning velocity)$^{3.8}$ has a good correlation in $O_2$-$CO_2$ oxidizer case.

• YAKHAK HOEJI
• /
• v.18 no.4
• /
• pp.243-248
• /
• 1974

Nine benzoxazolin-2-thione derivatives were sunthesized as the potential antimicrobial substances. These compounds were tested for the antimicrobial activities using Staphylococcus aureus and Escherichia coli by way of tube dilution method. The three compounds of I, II and VII omjoboted the growth of S.aureus at the concentration of 1${\mu}$g/ml, and III,VI,VIII and IX exhibited considerable antimicrobial activities against S. aureus at the concentration of 10.m.u.g/ml. As to the growth of E. Coli, VII VII and VIII inhibited at the concentration of 1${\mu}$g/,l. II,III and IV exhibited considerable antimicrobial activities against E. coli at the concentration of 10${\mu}$g/ml.

• Journal of Industrial Technology
• /
• v.19
• /
• pp.253-260
• /
• 1999

Two thermodynamic models were used to predict the partial molar volumes of solutes in supercritical carbon dioxide at infinite dilution: (1) the Peng-Robinson equation of state with various mixing rules including those based on $EOS/G^E$ (2) the Kirkwood Buff fluctuation integral with the hard sphere expansion (HSE) method. The Kirkwood-Buff fluctuation integral method, in which an equation of state for pure component and molecular parameters are required, produced better results especially near the critical point than the Peng-Robinson equation of state with the several mixing rules based an $EOS/G^E$. When the $EOS/G^E$ mixing rules were used, poorer results were obtained compared with the classical mixing rule and Kirkwood-Buff model.

• Journal of ILASS-Korea
• /
• v.11 no.1
• /
• pp.30-38
• /
• 2006

High temperature furnaces such as power plant and incinerator contribute considerable part of NOx generation and face urgent demand of De-NOx system. Reducing agent is injected into the flue gas flow to activate do-NOx system. Almost SCR system adopt vaporized ammonia injection system. Vaporizer, dilution system and additional space are needed to gasify and inject ammonia. Liquid spray injection system can simplify and economize post-treatment system of flue gas. In this study, mixing caused by gas or liquid injection of reducing agent into flue gas duct was investigated experimentally. Carbonated water was used as tracer and simulated agent and mixing of liquid spray in a duct flow was studied. To achieve that, the angle of attack of static mixer is simulated and $CO_2$ concentration is measured.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.11a
• /
• pp.89-90
• /
• 2018

In recent years, harmful substances and fine dust in the air are caused by respiratory and cardiovascular diseases through various mechanisms when they are introduced into the human body through respiration, thereby exacerbating human health and causing cancer by prolonged exposure do. In order to prevent such fine dust from being introduced into the room and to improve indoor air quality, improvement of air quality has attracted attention. Among indoor air pollutants, fine dust and CO₂ are pollutants that are directly affected by indoor number and activity. The purpose of this study is to evaluate the basic performance of cement matrix using photosynthetic bacteria as a basic study of fine dust and CO₂ adsorption type matrix to suppress indoor air pollution and improve air quality.

• Journal of the Korean Institute of Gas
• /
• v.16 no.5
• /
• pp.14-20
• /
• 2012

Biogas can be obtained from biogenic materials through an anaerobic digestion process. Since biogas has low calorific value and its composition significantly varies, appropriate combustion strategies need to be established to obtain stable combustion in engine applications. In this study, efforts have been made to investigate the effects of inert gas composition variations on engine performance and emissions. Results show that the MBT spark timing was advanced and $NO_x$ was reduced as the inert gas in the biogas rose. Moreover, $NO_x$ emission drop in $CO_2$ diluted biogas was more significant than that of $N_2$ due to higher heat capacity of $CO_2$, while THC emissions showed the opposite tendency. Thermal efficiency was increased in $N_2$ case with elevation of $N_2$ due to the decreased heat loss and PMEP. However, there is no difference in $CO_2$ case because of deteriorated flame propagation speed.