• 제목/요약/키워드: $CO_2$ Free

검색결과 1,460건 처리시간 0.032초

Magnetic and Electrical Properties of the Spin Valve Structures with Amorphous CoNbZr

  • Cho, Hae-Seok
    • Journal of Magnetics
    • /
    • 제2권3호
    • /
    • pp.96-100
    • /
    • 1997
  • A spin valve structure of NiO(40 nm)/Co(2 nm)/Cu(2.6 nm)/Co(x nm)/Ta(5 nm) has been investigated for the application of magnetic random access memory (MRAM). The spin valve structure exhibited very large difference in the coercivities between pinned and free layers, a relatively high GMR ratio, and a low free layer coercivity. The spin valves were prepared by sputtering and were characterized by dc 4-point probe, and VSM. The spin valves with combined free layer exhibited a maximun GMR ratio of 10.4% with a free layer coercivity of about 82 Oe. The spin valves with a single 10 nm thick a-CoNbZr free layer exhibited a GMR ratio of about 4.3% with a free layer coercivity of about 12 Oe. The GMR ratio of the spin valves increased by addition of Co between Cu and a-CoNbZr. It has been confirmed that the coercivity of free layer can be decreased by increasing the thickness of a-CoNbZr. It has been confirmed that the coercivity of free layer can be decreased by increasing the thickness of a-CoNbZr layer without losing the GMR ratio substantially, which was mainly due to high resistivity of the amorphous "layers".

  • PDF

The Electrophysiology Application on Guard Cells to See the Influence of Carbon Dioxide

  • Lee, Joon-Sang
    • 한국환경과학회지
    • /
    • 제23권5호
    • /
    • pp.763-770
    • /
    • 2014
  • The effect of $CO_2$ on the opening of stomata in the intact leaf of Commelina communis has been investigated. Full opening of stomatal apertures(around $18{\mu}m$) was achieved in the intact leaf by addition of $CO_2$($900{\mu}mol\;mol^{-1}$). At 90 minutes, the stomatal apertures of leaves treated with $CO_2$ free air were reduced. In contrast, stomata opened most widely with the treatment of $CO_2$ air at 90 minutes. The effects of light, $CO_2$ air and $CO_2$ free air on the change of membrane potential difference(PD) were measured. Fast hyperpolarization of guard cell membrane PD was recorded reaching up to -12 mV in response to light. If $CO_2$ free air was given firstly, there was no response. When light was given after $CO_2$ free air, the light effect was very clear. At the onset of $CO_2$ air, the PD showed a dramatic hyperpolarization to about -25 mV. Changes in the pH of apoplast in intact leaves in response to $CO_2$ air were observed. $CO_2$ air caused a change of 0.4 pH unit. Therefore, it can be hypothesized that $CO_2$ flowing could stimulate proton efflux which is a necessary precursor of stomatal opening.

Development of a Bottle-Free Multipurpose Incubator for Generating Various Bacterial Culture Conditions

  • Yang, Nam-Woong;Lim, Yong
    • Journal of Microbiology
    • /
    • 제43권1호
    • /
    • pp.28-33
    • /
    • 2005
  • The purpose of this study was to develop a multipurpose incubator, without the gas cylinders (bottles) which are required for $H_2$ and $CO_2$ supplementation. In our bottle-free multipurpose incubator, the $H_2$ and $CO_2$ were generated by chemical reactions induced within the chamber. The reaction between sodium borohydride and acetic acid at a molar ratio of 1:1 was used to generate $H_2$, according to the following formula: $4NaBH_4+2CH_3COOH+7H_2O{\rightarrow} 2CH_3COONa+Na_2B_4O_7+16H_2$, whereas the other reaction, citric acid and sodium bicarbonate at a 1:1 molar ratio, was used to generate $CO_2$, according to the following formula: $C_6H_8O_7+3NaHCO_3{\rightarrow}Na_3(C_6H_5O_7)+3H_2O+3CO_2$. Five species of obligate anaerobic bacteria, one strain of capnophilic bacterium, and one strain of microaerophilic bacterium were successfully cultured in the presence of their respective suitable conditions, all of which were successfully generated by our bottle-free multipurpose incubator. We conclude that, due to its greater safety, versatility, and significantly lower operating costs, this bottle-free multipurpose incubator can be used for the production of fastidious bacterial cultures, and constitutes a favorable step above existing anaerobic incubators.

새로운 비황분계 부취제 혼합 LPG 연료의 엔진성능과 배출가스 특성에 관한 연구 (A Study on the Performance and Exhaust Emissions Characteristics of LPG Engine using LPG Fuel with New Sulfur Free Odorant)

  • 김재곤;임의순;민경일;정충섭
    • 에너지공학
    • /
    • 제23권3호
    • /
    • pp.88-95
    • /
    • 2014
  • 일반적으로 황분계 부취제는 연료가스에 인한 가스중독, 발화, 폭발 등의 사고를 방지하고, 배출가스에 의해 연료 가스 누출의 즉각적으로 손쉽게 검출할 수 있도록 LPG, LNG 그리고 도시가스와 같은 연료가스에 첨가 사용하고 있다. 본 연구에서는 새로운 비황분계 부취제(K-Petro S-Free)를 사용한 LPG 혼합연료의 엔진 성능과 배출가스(CO, THC, $CO_2$, $NO_x$, $SO_2$ ) 특성을 살펴보았다. 새로운 비황분계 부취제를 40mg/kg를 혼합한 LPG 연료(여름용, 겨울용)와 현재 사용 중인 황분계 부취제 (EM, ethyl mercaptan)를 혼합한 LPG 연료의 엔진 성능과 배출가스 특성을 실험하였다. 비황분계 부취제를 혼합한 LPG 연료의 엔진 성능은 황분계 부취제를 혼합한 LPG 연료와 비교할 때 비슷한 결과를 보여 주었다. 한편, 비황분계 부취제를 혼합한 LPG 연료의 엔진 배출가스 중 CO, THC, $CO_2$, $NO_x$은 황분계 부취제를 혼합한 LPG 연료와 비교할 때 비슷한 특성을 보였다. 그러나 2,000rpm에서 배출가스 중 $SO_2$은 비황분계 부취제를 혼합한 LPG 연료가 황분계 부취제를 혼합한 LPG 연료보다 83% 감소하는 우수한 결과를 보였다.

Revisiting $H_2$ and CO Interactions with Pt(111) Surfaces

  • Kim, Je-Heon;Jo, Sam-K.
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
    • /
    • pp.203-203
    • /
    • 2011
  • The importance of stepped single-crystal surfaces as model catalysts has been well recognized [1]. We re-investigated the adsorption properties of $H_2$ and CO, most important species in platinum-based catalysts, on nearly defect-free and highly stepped surfaces of one and the same Pt(111) crystal. While both being symmetric and single-peaked from the nearly defect-free surface, temperature-programmed desorption (TPD) spectra from the highly stepped surface saturated at 90 K with H and CO were triply- and doubly-peaked, respectively. Once pre-adsorbed, CO preempted step and then terrace sites, inhibiting the dissociative $H_2$ adsorption completely. Pre-adsorbed H inhibited the CO adsorption on terrace sites only, leaving defect sites intact for CO adsorption even at the saturation H precoverage. On defect-free Pt(111), while pre-adsorbed CO inhibited the dissociative $H_2$ adsorption completely, pre-adsorbed H could not inhibit the CO adsorption completely. These intriguing, but interesting results are discussed in terms of energetics/kinetics and the role of surface step sites in the dissociative adsorption of $H_2$ on Pt(111) [2].

  • PDF

Biological screening of 100 plant extracts for cosmetic use (1) Antioxidative activity and free radical scavenging activity

  • Kim, Jeong-Ha;Kim, Beom-Jun;Seok, Chung-Hyun;Won, Il;Kim, Jeong-Haeng;Kim, Hyun-Pyo;Heo, Moon-Young
    • 대한화장품학회지
    • /
    • 제22권2호
    • /
    • pp.115-123
    • /
    • 1996
  • Methanolic aqueous extracts of 100 plants were screened for antioxidative activity using Fenton's reagen/ethyl linoeate system and free radical scavenging activity using DPPH free radical generating system. The results suggest that at least six plants including Eugenia caryophyllata, Alpinia offiicinarum, Rhus verniciflua, Curcuma longa, Rheum palmatvm and Evodia officinalis may be the potential sources of antioxidant, But only one plant, Cornus officinalis, may be the potential source of free radical scavenger from natural plants.

  • PDF

식품 및 생체 carotenoid의 co-oxidation

  • 김혜경;최홍식
    • 생명과학회지
    • /
    • 제2권2호
    • /
    • pp.91-96
    • /
    • 1992
  • 효소에 의한 carotenoid의 co-oxidationgus상은 lipoxygenasechrao하에서 지방산인 linoleic acid가 산화되어 이때 만들어진 free radical에 의해 carotenoid가 쉽게 산화되기 때문에 일어나는 현상이다. 이화같이 carotenoid의 co-oxidation에서 lipoxygenase는 free radical을 만들면서 반응속도를 빠르게 하는 촉매제의 역할을 다음과 같이 담당하고 있다고 할 수 있다. Lipoxygenase에 의한 carotenoid의 co-oxidation 현상을 처음 발견한 것은 대두가루를 밀가루와 혼합하여 사용할 때였다. 대두가루 속에 다량 함유된 lipoxygenase에 의해 밀가루의 carotenoid 색소가 표백되는 것을 보고 이 현상은 lipoxygenase에 의해 기질은 지방산이 산화되는 동안 caroenoid가 쉽게 co-oxidation되기 때문이라는 것을 알아내었다. 즉, carotenoid는 지질이 존재하는 반응시스템에서 항산화제로서 혹은 secondary substrate로서 작용한다고 할 수 있다.

  • PDF

Pb-FREE SOLDER PLATING

  • Yada, Y.;Tokio, K.
    • 한국표면공학회지
    • /
    • 제32권3호
    • /
    • pp.211-213
    • /
    • 1999
  • In the future, restrictions are likely to be imposed on the use of lead in the electronics industry. In dealing with such a move, we have been developing Pb-free Sn-Ag plating process to replace presently available Sn-Pb process. In this paper, the result of a basic comparison test between Sn-Pb plating and Sn-Ag plating is reported.

  • PDF

삼화 원탄과 무회분탄의 촉매(K2CO3) 가스화 반응성 비교 연구 (Comparative Studies on K2CO3-based Catalytic Gasification of Samhwa Raw Coal and Its Ash-free Coal)

  • 공용진;임정환;임영준;전동혁;이시훈;유지호;이영우
    • 청정기술
    • /
    • 제20권3호
    • /
    • pp.218-225
    • /
    • 2014
  • 석탄의 가스화는 촉매 도입 시 온순 조건에서 가능하나, 석탄 내 회분에 의한 비활성화에 의해 반복적인 촉매 활용이 힘들다. 이에 본 연구에서는 삼화 원탄에서 회분을 제거하여 삼화 무회분탄(ash-free coal, AFC)을 제조한 후 가스화 반응성을 원탄과 비교하여 알아보았다. 우선 원탄을 대상으로 고정층 반응기에서 수증기 공급량, 공간 속도(space velocity), 온도 및 촉매를 변수로서 가스화 조건을 결정하였다. 고체상 혼합법으로 다양한 촉매 도입 시, 유동성을 갖는 $K_2CO_3$가 가장 높은 활성을 보였다. 무회분탄은 원탄보다 낮은 반응성을 보였으며, 이는 용매(1-methylnaphthalene, 1-MN)를 이용한 고온 추출 및 건조 공정 중에 소모된 산소 기능기 함량과 증가된 탄화도(carbonization)에 기인한다. $K_2CO_3$ 가 혼합된 무회분탄의 반응성은 급격히 증가하여 낮은 온도 ($700^{\circ}C$)에서도 높은 전환율을 보였다. 이때 $H_2/CO$$CO_2/CO$ 비율도 증가하는데, 이는 촉매에 의해 수성가스전환(water-gas shift) 반응이 활성화됨에 기인한다. 본 연구에서는 무회분탄의 저온 촉매 가스화 반응을 통해 석탄 가스화 공정의 경제성이 개선될 수 있음을 확인하였다.

Alkali 물질이 포함되지 않은 화학물질을 이용한 Co 합금박막의 무전해도금 (Electroless Plating of Co-Alloy Thin Films using Alkali-Free Chemicals)

  • 김태호;윤형진;김창구
    • Korean Chemical Engineering Research
    • /
    • 제45권6호
    • /
    • pp.633-637
    • /
    • 2007
  • Alkali 물질이 포함되지 않은 $(NH_4)_2Co(SO_4)_2{\cdot}6H_2O$, $(NH_4)_2WO_4$, $(NH_4)H_2PO_4$ 등의 전구체를 사용하여 구리배선의 보호막 제조를 위한 Co 합금박막의 무전해도금을 수행하였다. pH, Co 전구체 농도, 증착온도 등의 공정변수들의 변화에 대한 Co 합금박막의 두께와 표면형상을 살펴봄으로써 이들 공정변수가 alkali 물질이 포함되지 않은 화학물질로 무전해도금된 Co 합금박막의 특성에 끼치는 영향을 살펴보았다. pH, Co 전구체 농도, 증착온도가 증가할수록 Co 합금 박막의 두께가 증가하였고 이는 alkali 물질이 포함된 Co 합금박막의 무전해도금 결과와 비슷하다. SEM(scanning electron microscopy)을 이용한 Co 합금박막의 표면형상 관측 결과, 본 연구에서 사용된 공정조건에서 Co 합금박막의 무전해도금을 위한 적절한 pH와 온도의 범위가 각각 8.5~9.5와 $75{\sim}85^{\circ}C$임을 얻었다. 본 연구를 통하여 alkali 물질이 포함되지 않은 화학물질을 이용한 무전해도금으로 구리배선의 보호막 제조용 Co 합금박막의 증착이 가능함을 확인하였다.