• Journal of Welding and Joining
• /
• v.7 no.4
• /
• pp.12-21
• /
• 1989

Laser beam welding parameters have experimentally investigated, using a continuous wave 3kW $CO_2$ laser with the various travel speeds, beam mode and laser beam power in low carbon steels. An optimum position of focus and the effect of shielding gas on penetration depth with varying the flow range of 0.5 to 5.1m/min have been combined to investigate the effect of laser power and travel speed on penetration depth and bead width. It is found that the optimum position of focus in 3kW class laser is 0.5 to 1.5mm below the surface of the material. The flow rate of shielding gas affects the penetration depth and He is more effective than Ar. The penetration depth in laser welds of low carbon steels is between two and four times of the bead width. Laser beam welding of butt joints in 2mm thick carbon steel has been carried out to establish a weldability lobe. The lobe indicating acceptable welding conditions is introduced.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2006.11a
• /
• pp.291-294
• /
• 2006

본 연구는 화재로부터 인명과 재산을 보호하기 위한 자동 소화 시스템으로서 마이컴을 사용하여 고신뢰성, 고정밀도, DIGITAL화를 추구하는 시스템을 개발 하였다. 기존의 소화 방제 시스템들은 스프링클러를 사용하여 물로 화재를 진압하고 있으며 이러한 시스템은 비용이 많이 들고 대량의 물을 사용하고 있기 때문에 수손피해($80{\sim}120{\ell}/min$)가 있고 대용량 펌프 및 $47,000{\ell}$의 저장시설이 필요하다. 이러한 문제점을 해결하기 위하여 본 시스템은 이산화탄소($CO_2$ 가스나 하론1301 가스 또는 질소 가스를 분사하여 대기 중의 산소를 희석시키거나 질소의 양을 증가시키는 방법으로 화재를 진압하는 시스템을 개발 하였다. 개발된 시스템은 고가의 장비 즉, 전산실, 통신기기실, 전기실, 발전기실, 케이블실, 제어실, 필름 보관실 등에 사용되어 장비를 보호하고 인명의 피해를 최소화하는데 사용될 것 있다.

• Journal of the korean Society of Automotive Engineers
• /
• v.2 no.2
• /
• pp.31-39
• /
• 1980

복지사회적 목표에서의 도시계획 및 교통문제는 환경보전의 측면에서 상충되는 관계가 이루어 지고 있다. 특히 대도시에서 자동차의 배출가스에 의한 대기오염은 매우 심각한 관계에 이르고 있다. 우리나라에서도 앞으로 급증할 것으로 예상되는 자동차 증가율과 상대적으로 협조한 도 로의 점유율 및 이에 따른 자동차 주행 pattern의 불규칙성을 감안하면 외국과 같은 규제기준의 설정이 필요하다. 자동차 배출가스에 의한 대기오염의 심각성은 배출가스중에 들어있는, 일산 화탄소(CO), 탄화수소(HC), 질소산화물(NOx), 알데히드, 연화합물 및 발암성 방향족화합물 등 으로, 이것은 인체에 유해한 영향을 주고 있다. 이와 같은 실정에서 인간의 건강을 공해로부터 보호하기 위한 기준으로 세계보건기구 WHO 는 1972년 "WHO Technical Report Series, No.506" 에서 SO$_{2}$ 분진 일산화탄소 및 photochemical 에 대하여 기준 목표를 설치하였다.목표를 설치하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.39-40
• /
• 2014

마그네슘합금을 주조한 후 열간압출하여 CaO 첨가와 열간압출이 마그네슘 합금의 고온산화에 미치는 영향을 조사하였다. CaO 첨가효과는 첫째, $CO_2+1%SF_6$ 보호가스 없이 마그네슘 합금을 대기 중에서 주조할 수 있도록 하며, 둘째, 내열성을 크게 증진시켜 마그네슘합금의 산화 한계를 증가시키는 것이다. 열간압출 효과는 모재의 결정립계에 존재하는 석출물을 파괴시켜 석출물의 부피분율을 감소시키는 것으로서, CaO를 첨가할수록 석출물의 분율이 증가하였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.2
• /
• pp.92-98
• /
• 1998

With the development of semiconductor devices, adoption of microcontroller prevails in industrial area. But in are welding industry, there has not been much progress in adoption of microcontroller technology. Therefore, this paper shows the application of digital control technology to welding machine. This paper presents the design of microcontroller that is appropriate for three phase $CO_2$ gas metal are welding machine. By using microcontroller in $CO_2$ gas metal are welding machine, the overall cost can be reduced compared to analog comtroller. Also TMS370C850 microprocessor is used as overall microcontroller for the are welding machine.

• Journal of Aerospace System Engineering
• /
• v.14 no.spc
• /
• pp.7-12
• /
• 2020

In this paper the new revision of Korean Airworthiness Standards (KAS) - Emissions was proposed for enforced environmental standards. The Aircraft Engine Fuel Venting and Exhaust Emissions Requirements have been only defined for smoke, HC, CO and NOx as management items in previous KAS. However, this standard has not covered the current situation that International Civil Aviation Organization (ICAO) and United States Environmental Protection Agency (EPA) enforced environmental regulations, such as emissions trading system, limitation of CO₂ emissions and restriction of exhaust gas. In order to overcome these outdated situations, we presented the new requirements for aircraft exhaust gas emissions standard of Korea based on the latest standards of United States, Europe and other countries.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.12
• /
• pp.1245-1254
• /
• 2008

Proposing a method for the estimation of the social cost for global warming impact (external cost) is the aim of this paper. Both the endpoint approach and conjoint analysis were applied to estimating the social cost for global warming. The endpoint approach was used to assess the damage on the safeguard subjects by global warming due to the emission of greenhouse gases into the atmosphere. The conjoint analysis was used to estimate the economic values for safeguard subjects which measure the social preferences and willingness to pay (WTP) on safeguard subjects. The economic values of human health and social asset were estimated at 62,261,700 Won / DALY (yr) and 10,000 Won / 10,000 Won, respectively. Moreover, cost factors of GHGs were calculated by multiplying the damage factor which is quantified the unit damage on safeguard subject and the economic value. In the case of CO$_2$, the cost factor was calculated at 13.52 Won / kg (13,520 Won / ton). External cost of products or services can be calculated by multiplying the GHG inventory result of products or services by the cost factor of each GHG. inventory.

• Journal of the Korean Institute of Gas
• /
• v.10 no.4 s.33
• /
• pp.34-40
• /
• 2006

This paper provides a fusion technology between a district cooling energy system and an environment conservation policy based on the energy savings and reusable cold energy resources. The district heating and cooling systems are very effective ways for an energy saving, a cost reduction and a safety control. It is necessary to equalize the energy savings and an environmental preservation policy for an improved human lift. A gasification process of a liquefied natural gas, cooling water from deep seawater and an ice water thermal storage system may produce a cold energy. A district cooling system is used to cool an apartment, office buildings and factory facilities with a cooling energy supply pipeline. LNG cooling energy will switch a conventional air-conditioning system, which is operated by on electrical energy and a Freon refrigerant. Coincident with significant clean energy and operating cost savings, LNG cold energy system owen radical reductions in an air-borne pollutant, $CO_2$ and the release of environmentally harmful refrigerants compared with that of the conventional air-conditioning system. This study provides useful information on the fusion technology of a LNG cold energy usage and energy savings, and environmental conservation.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.352-355
• /
• 2004

Inconel 625 is useful in variety of industrial applications because of the resistance to attack in various corrosive media at temperatures from $200^{\circ}C$ to over $1090^{\circ}C$, in combination with good law- and high temperature mechanical strength. Rencently, this material is also used widely in offshore processing piping in order to extend the maintenance tenn and improve the quality of anti-corrosion. In general, high quality weldments for this material are readily produced by commonly used processes. Not all processes are applicable to this material group, Ni-alloys. Metallurgiad characterictics or the unavailability of matching, position or suitable welding processes. Nowadays, the flux cored wire is developed and applied for the better productivity in several welding position including the vertical position. in this study, the weldability and weldment characteristics of inconel 625 are considered in FCAW weld associated with the several shielding gases($80\%Ar\;+\;20\%\;CO_2,\;50\%Ar\;+\;50\%\;CO_2,\;100\%\;CO_2$) in viewpoint of welding productivity.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.11a
• /
• pp.234-238
• /
• 2004

Inconel 625 is useful in variety of industrial applications because of the resistance to attack in various corrosive media at temperatures from $200^{\circ}C$ to aver $1090^{\circ}C$, in combination with good law- and high temperature mechanical strength. Rencently, this material is also used widely in offshore processing piping in order to extend the maintenance term and improve the quality of anti-corrosion. In general, high quality weldments for this material are readily produced by commonly used processes. Not all processes are applicable to this material group, Ni-alloys. Metallurgical characterictics or the unavailability of matching, position or suitable welding processes. Nowadays, the flux cored wire is developed and applied for the better productivity in several welding position including the vertical position. in this study, the weldability and weldment characteristics (mechanical properties) of inconel 625 are considered in FCAW(Flux Core Arc Welding) associated with the several shielding gases($80\%Ar\;+\;20\%CO_2,\;50\%Ar+50CO_2,\;100CO_2$) in viewpoint of welding productivity.