• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.9
• /
• pp.1081-1086
• /
• 2014

An experimental study was performed in order to compare with the case of using pure diesel the characteristics of combustion pressure and exhaust emissions when the engine speed was changed in a CRDI 4-cylinder diesel engine using biodiesel( Canola oil) blended and pure diesel fuel. As a results, the combustion pressure was decreased with increasing biodiesel blended rate when engine speed was 1,000, 1,500, 2000(rpm). but the combustion pressure of the engine speed 2,500rpm was increased with increasing biodiesel blended rate. The emission results show, that CO was decreased with increasing biodiesel blended rate and engine speed. The emission of $CO_2$, NOx, were increased with increasing biodiesel blended rate and engine speed.

• Environmental and Resource Economics Review
• /
• v.23 no.4
• /
• pp.667-688
• /
• 2014

This research tested the EKC (Environment Kuznets Curve) Hypothesis using the $CO_2$ Emissions by region and GRDP. We built the panel data set on the 15 local government region from 1990 to 2010 for this analysis. GRDP, population and total factor productivity was considered as the factors influencing on the regional $CO_2$ Emissions. Analysis method in this research is panel GLS model as Lantz and Feng (2006). The results show that the EKC hypothesis did not hold in Korea but there is inverted U relationship between the $CO_2$ Emissions and total factor productivity. As the total factor productivity grows, the $CO_2$ increased but decreased after a certain level.

• Membrane Journal
• /
• v.30 no.1
• /
• pp.46-56
• /
• 2020

In this study, poly (ether-block-amide) (PEBAX)/poly (ethylene) glycoldiacrylate (PEGDA)/zeolitic imidazolate framework-8 (ZIF-8)-polyethersulfone (PES) composite membranes were prepared. The gas permeation properties of N₂ and CO₂ were investigated for each composite membrane. First, the gas permeability in the PEBAX/PEGDA-PES composite membrane decreased with increasing PEGDA content for each molecular weight at PEGDA250, PEGDA575, and PEGDA-700 g/mol. The CO₂/N₂ selectivity showed a constant value and gradually increased with increasing PEGDA content after 30 wt% PEGDA, and PEBAX/PEGDA250 50 wt%-PES prepared by adding PEGDA250 g/mol 50 wt% showed a selectivity of 15.1. This is because as the PEGDA content increases, the number of diacrylate groups increases, and the CO₂ affinity due to the ether structure of PEGDA increases. Gas permeation properties according to ZIF-8 were investigated for composite membranes of PEGDA 0 to 30 wt%, with CO₂/N₂ selectivity almost constant for each molecular weight. The permeability of N₂ and CO₂ gradually increased with increasing ZIF-8 content, and CO₂/N₂ selectivity was the highest at 3.4 in PEBAX/PEGDA250 g/mol 30 wt%/ZIF-8 20 wt%-PES composite membrane.

• Journal of Energy Engineering
• /
• v.4 no.3
• /
• pp.372-378
• /
• 1995

분류층 석탄가스 반응온도에서 slag의 배출 조건을 원활하게 유지하기 위하여 CaCO3를 flux로 사용한 용융특성을 파악하였다. 첨가에 의한 용융온도는 flux 주입량에 따라 감소하다가 증가하였다. 최저 용융온도의 범위는 ash중 CaO 농도기준 30-40%의 범위에서 나타났으며, Base/Acid ratio에 따라 최소 용융온도는 ash중 무기물간의 eutetic effect가 작용함을 알 수 있었다. 고온에서의 slag 조성은 ash의 조성과 비교시 알카리 산화물의 휘발화와 SO2의 감소를 보여주고 있으며, salg중 환원성 가스가 증가함에 따라 금속 산화물의 환원에 의해 SiO2 조성은 증가하였다. CaCO3를 혼합한 시료를 질소분위기하에서 조제하여 점도를 측정한 결과, low silica ash의 경우 낮은 점도치를 보여주나, 250 poise 이하의 범위에서 고화되는 현상이 발생하였다. high silica ash에서는 CaCO3 투입에 의해 slag 점도는 감소하였는데, slag 분석 결과 CaO가 산소 제공물질(oxide doner)로 작용하여 silicate의 응집현상을 억제하는 것으로 나타났다.

• Environmental engineer
• /
• s.67
• /
• pp.10-12
• /
• 1992

대기중의 CO$_2$농도가 현재의 2배가 되면 대기온도는 3.8$^{\circ}C$상승한다고 한다. 그러나 CO$_2$가 대기중에서 증가하고 도시온도의 증가로 인한 green house effect와 분진농도가 증가하여 dust dome을 형성하게 되고 또 분진은 구름의 핵을 형성하므로 구름이 많아지면 기온이 내려간다. 대기의 혼탁도가 2배가 되면 기온은 3.4$^{\circ}C$내려간다고 하며 일사량이 1% 감소해도 지표의 평균 기온은 $5^{\circ}C$내려가고 15% 일사량이 감소하면 기온은 $9^{\circ}C$ 떨어진다.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2006.06a
• /
• pp.55-56
• /
• 2006

냉매 충전량과 이차유체의 입구조건은 $CO_2$용 열펌프시스템의 성능실험에서 중요한 제어변수이다. 따라서, 열펌프사이클의 적용과 난방성능 향상을 위해 제어변수의 특성을 조사하는 것이 필요하다. 본 논문에서, $CO_2$용 열펌프 사이클의 성능 실험은 여러 가지 냉매 충전량에서 이차유체 입구조건에 변화를 주어 수행 되었다. 실험결과, 난방COP는 냉매 충전량이 증가함에 따라 1158g의 냉매 충전량에서 최대가 되었다가 감소하는 경향이 나타나며, 이는 COP가 최대가 되는 냉매충전량이 존재함을 나타낸다. 또한, 난방성능은 가스쿨러내 이차유체의 질량유량의 증가에 따라 증가하였다. 가스냉각기내 2차유체의 입구은도가 $10^{\circ}C$에서 $40^{\circ}C$로 증가하면, 난방용량, 압축일량, 토출압력은 각각 -8.57%, -35.89%, 32.78%로 변화했으며, 증발기 2차유체의 입구 온도가 감소하였을 때 난방COP는 감소하는 경향을 보였다.

• Journal of the Korean Magnetics Society
• /
• v.9 no.2
• /
• pp.104-110
• /
• 1999

The effect of the composition and the heat treatment on the magnetic and magnetoresistance properties in AgCo alloy films and Fe/AgCo/Fe trilayers prepared by the co-evaporation method were studied. As the alloy film thickness decreases, especially below 50 nm thick, the magnetoresistance decreases and the saturation field increases significantly. The change of the Co content, heat treatment, and deposition of the Fe under/over-layer were effective to prevent the reduction of the and the increasing of the saturation field. For 40 at.%Co sandwiches, the minimum saturation field was obtained in the 20 nm alloy film with 30nm Fe under-over layer annealed at 300 $^{\circ}C$ for 10 min. Its saturation field and the MR ratio were 1.01 kOe 5.16% respectively.

• Applied Chemistry for Engineering
• /
• v.9 no.5
• /
• pp.624-628
• /
• 1998

The aromatic organic solvents(BTX) were decomposed in the fixed bed reactor packed with a 0.5% $Pt/{\gamma}-Al_2O_3$ catalyst, then, supercritical carbon dioxide(SC-$CO_2$) was used as the reaction media. And the conversion was dependent on the inlet concentration of BTX and the molar density of SC-$CO_2$. The conversion of BTX was decreased with increasing of inlet concentration, and was increased with temperature and pressure. The maximum conversion of benzene was 98.5% at $300^{\circ}C$ and 204.1 atm, and that of toluene and xylene were 82.0 and 76.5%, respectively, at $350^{\circ}C$ and 204.1 atm. The intermediate products of partial oxidation were identified as benzaldehyde, phenol, benzenemethanol, and so on. The BTX can be effectively converted into harmless $CO_2$ and $H_2O$ at appropriate operating condition. Thus, the nontoxic recovery process was suggested as the removal method of BTX.

• Applied Chemistry for Engineering
• /
• v.32 no.4
• /
• pp.431-441
• /
• 2021

In this study, PEBAX/GO-PEI and PEBAX/ZIF-8@GO-PEI composite membranes were prepared by varying the contents of GO and ZIF-8@GO in PEBAX, and also the gas permeation characteristics of N₂ and CO₂ was studied. Overall, the N₂ and CO₂ permeability of the PEBAX/GO-PEI composite membrane decreased as the GO content increased, and the CO₂/N₂ selectivity slightly increased. In the case of PEBAX/ZIF-8@GO-PEI composite membrane, the permeability of N₂ decreased, but CO₂ increased to 1 wt% of ZIF-8@GO and then decreased in the content thereafter. The CO₂/N₂ selectivity at 1 wt% of ZIF-8@GO was 92.3, showing the highest selectivity. This is thought to be due to the greatest effect of GO and ZIF-8 with good affinity for CO₂ alongside the effect of porosity ZIF-8 while improving compatibility with PEBAX and dispersing evenly. In addition, PEBAX/ZIF-8@GO-PEI composite membrane improved both CO₂ permeability and CO₂/N₂ selectivity than those of the PEBAX-PEI and PEBAX/GO-PEI membranes, except for ZIF-8@GO 5 wt%. The result was close to the Robeson upper bound.

• Proceedings of the KWS Conference
• /
• 2000.04a
• /
• pp.71-74
• /
• 2000

자기 구속 균열 시험법인 Tapered 시편 균열 시험법을 이용하여 Al-Mg 합금의 CW $CO_2$ 레이저 용접시 Mg 함량 변화에 따른 고온균열감수성 변화를 조사하였다. Mg 함량 1.9wt.%에서 최대균열감수성을 나타내고 있으며 이보다 Mg 함량이 증가하거나 감소하면 고온균열 감수성이 감소한다. 용접금속 결정립 크기 또한 고온균열감수성과 관련이 있으며 Mg 함량이 증가할수록 결정립이 미세화되며, 1.9wt.%Mg 이상에서 결정립이 미세화될수륵 고온균열 감수성 이 감소한다.