• 한국방재학회:학술대회논문집
• /
• 2010.02a
• /
• pp.45.2-45.2
• /
• 2010

자동차 주행 시 엔진회전수가 1,500rpm 이상이고 주행속도가 50km/hr 이상의 조건에서 가속 페달을 밟지 않은 상태로 관성주행(타행주행)을 하면 연료분사량이 "0"이 되고 그에 따라 엔진 배출 $CO_2$ 배출량도 "0"이 된다. 본 연구에서는 고속도로 및 자동차 전용도로에서의 이러한 연료차단(퓨얼컷 fuel-cut) 주행 구간을 찾고 연료차단 기능을 활용하는 경우 그 효과를 평가하였다. 본 시험의 결과 퓨얼컷 주행을 활용하면 약 4~5% 정도의 $CO_2$ 배출량을 줄일 수 있음을 알 수 있었고, 감속의 정도를 도로 상황에 맞게 최적화하는 경우 감소율을 더욱 향상시킬 수 있을 것으로 판단된다. 추후 본 시험의 결과를 이용하여 도로 내리막 구간에서 연료소모량 및 $CO_2$ 배출량을 저감하면서도 과속으로 인한 사고를 예방하는 방안으로 활용할 수 있을 것으로 판단된다.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.4
• /
• pp.132-140
• /
• 2012

Along with the increasing interest in environmental problems such as global warming, the South Korean government has established policies and regulations to reduce the amount of greenhouse gases, targeting a 30% reduction of $CO_2$ compared to business-as-usual levels by 2020. Thus, there have been many studies in construction field to control and reduce the amount of $CO_2$ emitted from buildings. $CO_2$ emission from the building construction could be obtained by using the life cycle assessment(LCA) methodology. In LCA, it is essential to have life cycle inventory(LCI) data of construction materials consisting of $CO_2$ emission data that have been defined and examined in a detailed way in order to obtain more accurate and detailed $CO_2$ emission of buildings. To date, however, the LCI data have been acquired only for the representative materials. Accordingly this study aimed to propose detailed $CO_2$ emission data for steel rebar and H-beam, which are the essential structural steel materials, by strength and type. To accomplish the objective, this study used Input-Output LCA methodology which is based on the Input-Output table. It is believed that the $CO_2$ emission data of steel materials acquired from this study would allow a more accurate assessment of $CO_2$ emission for diverse structural design alternatives.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.6
• /
• pp.1207-1213
• /
• 2011

This study was conducted to assess $N_2O$ emissions in agricultural soils of Korea. According to 1996 and 2006 IPCC (Intergovernmental Panel on Climate Change) methodology, $N_2O$ emission was calculated the sum of direct emission ($N_2O_{DIRECT}$) and indirect emission ($N_2O_{INDIRECT}$). To calculate $N_2O$ emissions, emission factor was used default of IPCC and activity data was used the food, agricultural, forestry and fisheries statistical yearbook of MIFAFF (Ministry for Food, Agriculture, Forestry and Fisheries). It was emitted 8,608 $N_2O$ Mg resulted from direct emission by application of chemical fertilizer and animal manure, input in n-fixation crops and input of crop residues and emissions converted $N_2O$ into $CO_2$ equivalent was 2,668 $CO_2$-eq Gg. Indirect emission as $N_2O_{(G)}$ (atmospheric deposition of $NH_3$ and $NO_X$) and $N_2O_{(L)}$ (leaching and runoffs) were 4,567 and 6,013 $N_2O$ Mg and emissions converted $N_2O$ into $CO_2$ equivalent were 1,416 and 1,864 $CO_2$-eq Gg, respectively. Total $N_2O$ emission in Korea agricultural soil in 2009 was 5,948 $CO_2$-eq Gg.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.378-384
• /
• 2019

In the food wastewater treatment facilities, the water quality improvement effect and the greenhouse gas emission amount followed by the change in electricity usage through a change of the aeration tank ventilation system were evaluated. also, the amount of greenhouse gas emission followed by the change in electricity usage through the change of the sludge dewatering, storage, transporting method was also evaluated. The total GHG emission from food wastewater treatment facility improvement were divided into direct emissions from the treatment processes and indirect ones from electricity usage. The water quality improvement effect of wastewater treatment plant was found to be 63.3% for BOD removal rate, 42.0% for COD removal rate, 71.0% for SS removal rate and 39.6% for T-N removal rate. and according to the results of calculating output by applying both direct emissions of greenhouse gas (Scope 1) and the indirect emission (Scope 2) of greenhouse gas followed by changes in power consumption. It was estimated that there was a total of 276.0tCO2eq./yr(7.5%) greenhouse gas reduction effect from 3,668.8tCO2eq./yr before improvement to 3,392.8tCO2eq./yr after improvement. In this result is not due to the effects of water quality improvement of emission source, but because the reduction in electricity use has reduced the amount of greenhouse gas emissions.

• Journal of Korea Water Resources Association
• /
• v.55 no.10
• /
• pp.785-799
• /
• 2022

The aim of this study was to characterize the emission pathways and the footprint of greenhouse gases (GHG) in Daecheong Reservoir using the G-res Tool, and to evaluate the GHG emission intensity (EI) compared to other energy sources. In addition, the change in GHG emissions was assessed in response to the total phosphorus (TP) concentration. The GHG flux in post-impoundment was found to be 262 gCO₂eq/m²/yr, of which CO₂ and CH₄ were 45.7% and 54.2%, respectively. Diffusion of CO₂ contributed the most, followed by diffusion, degassing, and bubbling of CH₄. The net GHG flux increased to 510 gCO₂eq/m²/yr because the forest (as CO₂ sink) was lost after dam construction. The EI of Daecheong Reservoir was 86.8 gCO₂eq/kWh, which is 3.7 times higher than the global EI of hydroelectric power, due to its low power density. However, it was remarkable to highlight the value to be 9.5 times less than that of coal, a fossil fuel. We also found that a decrease in TP concentration in the reservoir leads to a decrease in GHG emissions. The results can be used to improve understanding of the GHG emission characteristics and to reduce uncertainty of the national GHG inventory of dam reservoirs.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.5
• /
• pp.615-627
• /
• 2011

There have been few researches on the connection technology for steel structures, so the research outputs and the outcome of the technology development are still insufficient. The bracket-type connection should be improved for efficient constructability and $CO_2$ reduction. It should be replaced by a new type of weak-axis connection that has better structural performance and less $CO_2$ emission. Since the structural performance and safety of the new type of weak-axis connection must first be verified, however, a study on $CO_2$ reduction will be conducted. Therefore, this study looked into the structural performance of the bracket-type details, standard details, and ultra-simple details. It evaluated the requirements for connection materials and $CO_2$ emission. It was found that the ultra-simple weak-axis connection has thebest structural performance and the least $CO_2$ emissions, so it is deemed capable of replacing the bracket-type weak-axis connection.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.5
• /
• pp.429-436
• /
• 2016

In this study, the genetic algorithm based optimal structural design method is proposed. The objective functions are to minimize the cost and $CO_2$ emissions, simultaneously. The cost and $CO_2$ emissions are calculated based on the cross-sectional dimensions, length, material strength, and reinforcement ratio of beam and column members. Thus, the cost and $CO_2$ emissions are evaluated by using the amounts of concrete and reinforcement used to construct a building. In this study, the cost and $CO_2$ emissions calculated at the phases of material transportation, construction, and building operation are excluded. The constraint conditions on the strength of beam and column members and the inter-story drift ratio are considered. The linear static analysis by using OpenSees is automatically conducted in the proposed method. The genetic algorithm is employed to solve the formulated problem. The proposed method is validated by applying it to the 4-story reinforced concrete moment frame example.

• Spatial Information Research
• /
• v.20 no.2
• /
• pp.25-34
• /
• 2012

Air quality in Daegu area is lower compared to many other cities, since Daegu is a basin surrounded by mountains. Accordingly, the present study investigated the location of carbon monoxide(CO) monitoring stations for systematic CO pollution management on the basis of the CO emission distribution in Daegu area. In order to achieve this purpose, the location of CO monitoring stations, which can be used for the establishment of CO management, were assessed. Emission map in Daegu area was prepared using numerical map and Clean Air Policy Support System(CAPSS) data supplied by the M inistry of Environment. Average emissions were estimated by dividing emission sources into four subgroups(roadway, apartment, industry, and municipal incineration facility) according to legal division. The CO emission intensities were subdivided into 10, which a high number represents a high emission intensity, and the current monitoring stations were evaluated for the determination of their steps in CO emission intensities. As a result, additional installation of monitoring stations were suggested for the high CO emission areas rather than the low CO emission areas. A systematic CO management strategy would be established by the supplying various principle CO data when the CO monitoring stations are additionally installed at Kukwudong and other six sites on the basis of analyses of data obtained from 1999 to 2007.

• Journal of Korean Society of Forest Science
• /
• v.96 no.6
• /
• pp.644-651
• /
• 2007

This study compared and estimated the changes in carbon stocks and emissions of harvested wood products (HWP) by applying FAO statistics and domestic statistics for Korean HWP production, import, and export volume, which is almost always supposed to be included in the carbon emissions and removals inventory by country in negotiations since the 2nd commitment period (2013~2017) of the Kyoto Protocol, for assessing the changes in carbon stocks and emissions of HWP. As a result, when applying FAO statistics to the changes in carbon stocks of HWP as of 2005, stock-change approach (SCA) was estimated at 1.434 Tg C, atmospheric-flow approach (AFA) -1.330 Tg C, and production approach (PA) 0.597 Tg C. When applying Korean statistics, SCA was estimated at 1.246 Tg C, AFA -11.520 Tg C, and PA 0.444 Tg C. When applying FAO statistics to $CO_2$ emissions and removals from HWP, SCA showed a decrease of $-5,258Gg\;CO_2$ (removals), AFA showed an increase of $4,877Gg\;CO_2$ (emissions), and PA showed a decrease of $-2,189Gg\;CO_2$ (removals). When applying Korean statistics, SCA showed a decrease of $-4,569Gg\;CO_2$ (removals), AFA showed an increase of $5,573Gg\;CO_2$ (emissions), and PA showed a decrease of $-1,628Gg\;CO_2$, (removals). Therefore, the application of FAO statistics was shown to be more beneficial for the estimation of both the changes in carbon stocks and emissions of HWP by all methods other than that of Korean statistics.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.05a
• /
• pp.43-45
• /
• 2012

As a part of recent CO₂ emission reduction studies in the concrete industry with active use of concrete admixtures with low basic unit of CO₂ emission such as blast furnace slag (BFS), basic unit of CO₂ emission by SBFS was computed in order to assess CO₂ emission by reinforced concrete building with smart blast furnace slag (SBFS). In addition, SBFS concrete was applied to the subject building for assessment of CO₂ emission during material production step among construction steps. Life cycle CO₂ emission assessment on the subject building was classified into 7cases according to mix ratio of BFS and SBFS.