• Journal of the Korean Ceramic Society
• /
• v.37 no.1
• /
• pp.90-95
• /
• 2000

The ferrites, CuFe2O4 and SrFe12O129, were applied to decompose H2O for H2 generation. The ferrites prepared by the coprecipitation were reduced by CH4 gas to make the oxygen deficient ferrite. H2O was decomposed to form H2 by the oxygen deficient iron oxide, and the decomposition reactions were accelerated by the addition of divalent metals such as Cu and Sr in the ferrites. The spinel type CuFe2O4 containing a relatively large amount of divalent metals was more effective to H2 generation than magnetoplumbite type SrFe12O19 in H2O decomposition.

• Bulletin of the Korean Chemical Society
• /
• v.7 no.5
• /
• pp.385-388
• /
• 1986

The reaction of cupric nitrate trihydrate with S-2-pyridyl thioates in acetonitrile was studied. The major products were the corresponding carboxylic acids and $[Cu(NO_3)(C_5H_4NS)(C_5H_5NS$)] (Complex A). Sometimes $[Cu(NO_3)(C_5H_4NS)(H_2O$)] was also obtained in addition to Complex A. When Complex A was recrystallized in dimethylsulfoxide, $[Cu(NO_3)(C_5H_4NS)(C_5H_5NS)$ {$(CH_3)_2SO$}$_2]{\cdot}2H_2O$ was crystallized. The structures of these copper complexes and the role of cupric nitrate in the hydrolysis of S-2-pyridyl thioates are discussed.

• Clean Technology
• /
• v.25 no.3
• /
• pp.223-230
• /
• 2019

This research was performed to evaluate the characteristics of food waste from 5 areas in Gangwon Province, Korea and to predict the $CH_4$ gas production rate. Food wastes were sampled in July and September, 2017. The amount of methane gas generation was evaluated through the biochemical methane potential (BMP) test and a calculation method using chemical composition. Average bulk density and pH of the food wastes were in the range of $0.758{\sim}0.850g\;cm^{-3}$ and 4.29 ~ 4.75, respectively. By physical composition, vegetables were the highest with 56.43 ~ 72.81% with fruits recording 5.31 ~ 8.95%, cereals 1.60 ~ 18.73%, fish and meat 4.47 ~ 12.11%, and filtrate 1.76 ~ 3.64%. The average water content was 69.30 ~ 75.87%, and VS and ash content were 22.50 ~ 27.98% and 1.63 ~ 2.48%, respectively. In addition, $BOD_5$, $COD_{Cr}$, and $COD_{Mn}$ were in the ranges of $17,690.3{\sim}33,154.9mg\;L^{-1}$, $106,212.3{\sim}128,695.5mg\;L^{-1}$, and $51,266.1{\sim}63,426.3mg\;L^{-1}$, respectively. The NaCl content ranged from 0.81 to 1.17%. The results of elemental analysis showed that the contents of C, H, O, N, and S were 44.87 ~ 48.1%, 7.12 ~ 7.57%, 40.13 ~ 43.78%, 3.22 ~ 4.14%, and 0.00 ~ 0.02%, respectively. In a comparison of the methane production yield per VS mass of food waste, there was no significant difference between the cumulative amount (${0.303{\sim}0.354m_{CH4}}^3\;{kg_{VS}}^{-1}$) by the BMP test and the theoretical amount (${0.294{\sim}0.352m_{CH4}}^3\;{kg_{VS}}^{-1}$) calculated by chemical composition.

• Korean Journal of Environmental Agriculture
• /
• v.38 no.4
• /
• pp.245-253
• /
• 2019

BACKGROUND: Weathering of bottom ash (BA) might induce change of its surface texture and pH and affect physical and chemical properties of soil associated with greenhouse gas emission, when it is applied to the arable soil. This study was conducted to determine effect of weathering of BA in mitigating emission of greenhouse gases from upland soil. METHODS AND RESULTS: In a field experiment, methane (CH₄), carbon dioxide (CO₂), and nitrous oxide (N₂O) emitted from the soil was periodically monitored using closed chamber. Three month-weathered BA and non-weathered BA were applied to an upland soil at the rates of 0, 200 Mg ha^-1. Maize (Zea mays L.) was grown from July 1_st to Oct 8_th in 2018. Both BAs did not affect cumulative CH₄ emission. Cumulative CO₂ emission were 23.1, 19.8, and 18.8 Mg/ha/100days and cumulative N₂O emission were 35.8, 20.9, and 17.7 kg/ha/100days for the control, non-weathered BA, and weathered BA, respectively. Weathering of BA did not decrease emission of greenhouse gases significantly, compared to the weathered BA in this study. In addition, both BAs did not decrease biomass yields of maize. CONCLUSION: BA might be a good soil amendment to mitigate emissions of CO₂ and N₂O from arable soil without adverse effect on crop productivity.

• Journal of Hydrogen and New Energy
• /
• v.24 no.4
• /
• pp.340-346
• /
• 2013

Study on clean and efficient utilization technology for low rank coal with high moisture content is actively ongoing due to limited reserves of petroleum and of high grade coal and serious climate change caused by fossil fuel usage. In the present study, supercritical water gasification of low rank coal was performed. With increasing reaction temperature, content of combustible gases such as $H_2$ and $CH_4$ in the syngas increased while the $CO_2$ content decreased. As the reaction pressure increased from 210 to 300 bar, the $CO_2$ content in the syngas increased while the hydrocarbon gas content decreased. The $H_2$ and $CH_4$ content in the syngas increased slightly with pressure. With the addition of Pd, Pt, and Ru catalysts, it was possible to improve the production of $H_2$. Moreover, the increase of active metal content in the catalyst increased the $H_2$ productivity. The Ru catalyst shows the best performance for increasing the $H_2$ content in the syngas, while decreasing the $CO_2$ content.

• Asian Journal of Turfgrass Science
• /
• v.8 no.3
• /
• pp.137-147
• /
• 1994

We have established a high-frequency plant regeneration system via organogenesis from mature seed of Korean lawngrass(Zoysia japonica Steud.). The effects of 2,4-dichiorophenoxy acetic acid (2,4-D), 6-furfuryl amino purine (kinetin), $\alpha$-naphthaiene acetic acid (NAA), N6-benzyl amino pu-rine (BAP), and casein hydrolysate (CR) on cailus induction and multiple shoot formation on ex-posure to light were evaluated. Callus produced on the Murashige and Skoog (MS) medium containing 2,4-D and kinetin had high organogenesis potency. A single addition of 1.0 mg $L-^1$ 2,4-D significantly induced callus. Also, 1.0 mg L-$^1$ 2,4-D, with the addition of 0.1 mg $L-^1$ kinetin highly enlianced callus induction. The trend of cailus induction was also found on mediurn containing 0.1 mg $L-^1$ BAP with 1.0 mg $L-^1$2,4-D, and 1 g $L-^1$ CR with the addition of 1.0 mg $L-^1$ 2,4-D. However, NAA was no effective on callus formation. The growth of root was significantly high in the presence of 0.1 mg $L-^1$ kinetin compared to other concentrations. Over 2 mg $L-^1$ kinetin highly lengthened roots. Fresh weight of plantlet was highest on medium containing 0.1 mg $L-^1$ 2,4-D. Also, on medium containing 0.1 mg $L-^1$ BAP, fresh weight of piantlet was highly enhanced. BAP was significantly effective on multiple shoot formation, particularly when 2.0 mg $L-^1$ was added with 0.1 mg $L-^1$ 2,4-D. Callus induction and multiple shoot formation were achieved on MS basal medium containing 1.0 g $L-^1$ CH.

• Journal of the Korean Chemical Society
• /
• v.40 no.4
• /
• pp.243-248
• /
• 1996

New routes have been developed for the practical syntheses of dl-Muscone(1) employing cyclopentadecanone(2) as the starting material. In this experiment, addition of bromine to cyclopentadecanone in dried E. Ether solution with a trace of $AlCl_3$ as the catalyst were produced 2-bromocyclopentadecanone(3). This process was enhanced formation of regioselective enolate anion at $C_2$ position. 2-Bromocyclopentadecanone was put into $Li_2CO_3$-LiBr-DMF solution at 140∼150$^{\circ}C$, were produced trans- and cis-2-cyclopentadecen-1-one(4) mixture. Other by-products were reduced by control of reaction temperature and time. Trans- and cis-2-cyclopentadecen-1-one(4) mixture was directly put into dried E. Ether solvent and induce to react dropwise with $CH_3MgBr-Cu_2Cl_2$ complex, all of them got into 1,4-addition, dl-Muscone (1) was formed as the result. Conculsion, through three steps procedure from cyclopentadecanone(2) to dl-Muscone(1), the pure dl-Muscone was obtained with the high proportion of 85%, and synthetic cost was able to be much lower than any other conventional methods as there were no chemical separating steps.

• Applied Chemistry for Engineering
• /
• v.27 no.4
• /
• pp.433-438
• /
• 2016

The current study evaluated the air quality of the smoking booth equipped with the air purification system consisting of photocatalysts and air filters by measuring the concentrations of hazardous substances of tobacco smoke such as CO, HCHO, $CH_3CHO$, PM10 and PM2.5. To enhance the removal efficiency of hazardous substances, an infrared ray was exposed to improve the reactivity of OH radical generated from the photocatalyst toward environmental tobacco smoke (ETS) gas phase hazardous materials. It was found that the smoking booth with the air purification system improved the removal efficiency of hazardous substances containing formaldehyde by 85.2% compared to that of the smoking booth without any purification systems. In addition, the removal efficiency of the fine dust after treatment was enhanced up to 89.4%.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.6
• /
• pp.1884-1890
• /
• 2011

A series of Ni(II) and Pd(II) complexes bearing N4-type tetradentate ligands, [Ni($X^1X^2$-6-$Me_2bpb$) 1] and [Pd($X^1X^2$-6-$Me_2bpb$) 2]; 6-$Me_2bpb$ = N,N'-(o-phenylene)bis(6-methylpyridine-2-carboxamidate), $X^1$ = Cl, H, or $CH_3$, $X^2$ = $NO_2$, Cl, F, H, $CH_3$, or $OCH_3$) were designed, synthesized, and characterized to investigate electronic and steric effects of ligand on the norbornene polymerization catalysts. Using modified methylaluminoxanes as an activator, the complexes exhibited high catalytic activities for the polymerization of norbornene and the nickel complexes exhibited better catalytic activity the palladium complexes. Ni complex 1a with $NO_2$ group on the benzene ring showed the highest catalytic activity of $4.9{\times}10^6$ g of PNBEs/$mol_{Ni}{\cdot}h$ and molecular weight of $15.28{\times}10^5$ g/mol with PDI < 2.30. Complexes with electron-withdrawing groups are more thermally stable (> 100 $^{\circ}C$), and tend to afford higher polymerization productivities than the ones having electron-donating groups. Amorphous polynorbornenes were obtained with good solubility in halogenated aromatic solvents. A vinyl addition mechanism has been proposed for the catalytic polymerization.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.11
• /
• pp.1531-1541
• /
• 2002

The NOx emission characteristics of C$H_4$-Air coflow jet flames were numerically and experimentally investigated. NOx was measured using a chemiluminescent detection and calculated by the parabolic -type equation solver with a detatiled NOx chemistry. The fuel flow rate( $Q_{F}$), the diameter of mixture nozzle and the equivalence rate(Ф) were varied to discuss the EINOx of each flames at the various combustion conditions. The NOx emission index(EINOx) was introduced to quantify the NOx emission from the parametrically varied flames. The results show that Prompt EINOx increases on a logarithmic profile with increasing ${\Phi}$ and keeps nearly constant for the variation of $Q_{F}$. Thermal EINOx reaches the maximum value at around ${\Phi}$ =1.5 and then slowly decrease for ${\Phi}$ >1.5. In addition, Thermal EINOx increases with increasing $Q_{F}$, but nearly indifferent to the variation of the mixture nozzle diameter. Total EINOx also shows a peak at around ${\Phi}$ =1.5, followed by a relatively sharp decrease for 1.5< ${\Phi}$ <2.5 and increase slowly for 2.5 < ${\Phi}$ < $\infty$ The present Total EINOx trend is well explained by a combination of above Thermal and Prompt EINOx trend with the variation of ${\Phi}$ n of ${\Phi}$.