• ALGAE
• /
• 제20권3호
• /
• pp.251-260
• /
• 2005

Antioxidative activities of Chlorophyta and Phaeophyta in Jeju Island were measured by superoxide anion ($O_2^{{\cdot}-}$), hydroxyl radical ($HO^{\cdot}$), hydrogen peroxide ($H_2O_2$) and DPPH free radical scavenging assays. Methanolic and aqueous extracts of the seaweeds were prepared at both temperatures, higher (70$^{\circ}C$) and room temperature (20$^{\circ}C$), and screened for the construction of an extract bank from seaweeds in Jeju Island. A variety of extracts showed positive effect against reactive oxygen species (ROS). Especially, Sargassum thunbergii methanolic extract at 70$^{\circ}C$ (70ME, 97.41%), S. fulvellum methanolic extract at 20$^{\circ}C$ (20ME, 84.66%), Codium fragile aqueous extract at 70$^{\circ}C$ (70AE, 96.61%) and S. thunbergii 20ME (97.44%) exhibited the highest scavenging activities against $O_2^{{\cdot}-}$, $HO^{\cdot}$, $H_2O_2$ and DPPH free radicals, respectively. Total phenolic contents also examined but did not show a positive correlation with ROS scavenging abilities (except for a few extracts). These results indicate that further investigation is needed to identify and purify the responsible antioxidative components.

• 한국건설순환자원학회논문집
• /
• 제7권1호
• /
• pp.29-36
• /
• 2019

본 연구는 투수시험 실시 후 고로 슬래그 자극제로 $Na_2SO_4$를 첨가한 고로 슬래그 시멘트 페이스트 시편의 자기치유 특성으로서 충진율과 자기치유 생성물을 고찰하였다. 실시한 시편에 대해 충진율과 자기치유 생성물을 분석하였다. 자기치유 정도는 충진율로 평가하였으며 충진율은 객관성을 갖기 위해 BSE-DIP를 이용한 파노라마 분석법으로 실시하였다. 평균 충진율은 Top 부분은 평균 18%, Middle 부분은 평균 7%, Bottom 부분은 평균 5%로 시편의 윗부분에서 아래 부분으로 갈수록 충진율은 감소되는 경향을 나타냈다. 또한 구간별 최대 충진율은 44%이었고 최소 충진율은 3%이었다. 투수시험 후 잔존하는 자기치유생성물은 기본적으로 Ca 원소와 고로 슬래그에서 유래된 Al 원소를 다량 함유하고 있었으며 Si 원소는 균열 표면으로부터 가깝게 위치한 곳에 주로 존재하였다. 자기치유 생성물 중에서 가장 많이 존재하는 광물은 C-A-H로 68% 정도 존재하였다. $CaCO_3$는 13%, C-A-S-H는 8% 순으로 3가지 물질이 자기치유 생성물의 90% 정도를 차지하고 있었다. C-A-H는 주로 균열 표면에서 약간 떨어진 부분에서 존재하였으며 각진 형태 이거나 침상 형태의 형상을 나타냈다. C-A-S-H는 기존의 시편과 자연스럽게 이어지게 표면을 타고 생성되었으며 $CaCO_3$는 시편의 표면이나 균열의 내부 등 위치에 상관없이 전반적으로 보였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.1396-1399
• /
• 2005

Gas permeability of the solidified sewage sludge needs to be characterized in order to use as a large-scale landfill cover material. Four different types of the samples were prepared for gas permeability experiments: (1) granite soil, (2) dried sewage sludge, (3) solidified sewage mixed with slag and (4) solidified sewage mixed with granite soils. The experimental instrumentation and measurement devices were newly designed and created to effectively evaluate gas permeability of the samples.

• 한국건축시공학회지
• /
• 제12권5호
• /
• pp.503-509
• /
• 2012

In this study, the potential use of indigenous natural loess(Hwangtoh) as a new construction material, via alkali activation in conjunction with microwave heating, was investigated. Hwangtoh pastes with three different mix proportions of varying alkali liquid concentrations at a constant liquid-to-Hwangtoh ratio of 0.55 were prepared. Through the investigation it was found that it is possible to prepare Hwangtoh paste with $19.02N/mm^2$ at the age of 4 hours with the alkali solution of 8M NaOH and 1:4.5 mass ratio of liquefied $Na_2SiO_3$ at the curing temperature of $60^{\circ}C$ by microwave heating. The strength development at early age of the alkali activated Hwangtoh paste specimens may be attributed to both a higher rate of reaction and moisture evaporation due to microwave heating.

• 대한가정학회지
• /
• 제36권2호
• /
• pp.121-130
• /
• 1998

The purpose of this study was construction of bell-bottom blue jeans according to change of flare line and investigate the effects clothing pressure according to various movements of the legs. In this study, movements of leg were classified by M1, M2, M3, M4.(M1:erecting, M2: leapfrogging position, M3:sit-on-one' keens position, M4:Traditional nobel-sitting position) The results were as follows: As usings the leg surface shell by the adhesive paper taping method, basic slacks pattern and blue jeans patterns according to change of flare line was constructed. The order of clothing pressure of the different patterns is C(the flare line is on the calf of the leg)>B(the flare line is on the knee)>A(the flare line is on the thigh). Clothing pressure in the knee point was highest and when the flare line was on the calf of the leg, clothing pressure showed high.

• 플랜트 저널
• /
• 제6권4호
• /
• pp.63-71
• /
• 2010

The best way to prevent the corrosion of piston rod is a selection of quality of the material and method of construction which minimize the porosity. The high velocity oxy fuel(HVOF) method, which generates lower porosity than existing plasma spray, was applied to ceramic laminated bond layer. Porosity percentage fell to bellow 2%, lower than that of plasma spray at 7%. Coating material of ceramic-coated main layer was selected as the $Cr_2O_3$ affiliation material, which is more dense than $Al_2O_3$ affiliation. To fill up the pores formed after the coating process, we sealed the bond layer and main layer. Sealing process was performed twice, once after the coating and once after the grinding. Upon the anti-corrosion test on the sealed sample and on the non-sealed sample, it is confirmed that the sealed sample was not corroded for 1,000 hours while the non-sealed sample was corroded within 48 hours.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 추계 학술논문 발표대회 논문집
• /
• pp.5-8
• /
• 2006

This study investigates the field application, Songdo the # 1st WORLD, on zero-crack construction of the fundamental mass concrete using double bubble sheets and applying low heat mixture. Experimental results of hydration heat analysis showed that crack modulus of concrete incorporating 20% of blast furnace slag cement was 1.0 in 120 hours, representing 50% probability of crack occurrence, thus requiring additional measures. As for a curing method, a specimen insulating two layers of vinyl chloride+double bubble sheets exhibited only $16.5^{\circ}C$ difference between upper and lower sections, and it also showed favorable workability as well as competitive economic side. Therefore it was determined to use it for curing method in this field. For the curing results of practical field, using 2 layers of vinyl chloride+double bubble sheets and applying low heat mixture on the fundamental mass concrete in 3A residential building exhibited less than only $15^{\circ}C$ difference between surface and center section of that in 5 days elapse and less than $20^{\circ}C$ in 9 days. This means that the crack by hydration heat was prevented, and other fields structures also resisted the plastic shrinkage by insulating the vinyl, sinking crack by second temping, even drying shrinkage by the mixture of low unit water. Therefore the crack on the placement has not been found so far, since the construction was started before 6 month.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권10호
• /
• pp.1386-1390
• /
• 2002

In aiming to identify the genes or genetic regions responsible for quantitative traits, a swine reference population had been constructed using three Large White boars and seven Meishan dams as parents. Five $F_1$ males and 23 $F_1$ females were intercrossed to generate 147 $F_2$ offspring. Thirty-one microsatellite markers covering Sus scrofa chromosomes (SSC) 2, 4, 6 and 7 were genotyped for all members. Construction of genetic microsatellite maps was performed using the CRIMAP software package. The lengths of these chromosomes were longer than MARC maps. They were 158.6cM, 180.3cM, 197.3cM and 171.4cM, respectively. A two modified orders of markers were observed for SSC6 and SSC7. The female map on SSC6 was shorter than male map, and the contrary was on SSC 2, 4 and 7.

• 한국건축시공학회지
• /
• 제9권6호
• /
• pp.175-181
• /
• 2009

본 연구에서는 폴리카본산계에 혼합 사용된 혼화제의 혼입율 변화에 따른 조강용 혼화제로서의 실무에서의 활용가능성 여부를 판단하고자한 실험연구 결과이다. 유동성은 만족하는 경향으로 나타났으며, 공기량은 KS규정보다 다소 작고 단위용적질량은 만족하는 것으로 나타났다. 블리딩 량은 B2가 가장 적게 나타났고, 응결시간은 A1, B1, C1에서 초결 및 종결이 빠르게 나타났다. 경화 콘크리트의 특성으로 조기재령의 압축강도 발형 경향은 7일 재령에서 C2의 모든 첨가율이 가장 높은 강도 값을 나타내었고 그 중 1.3%의 첨가율이 가장 큰 강도 발현경향을 나타내었다. 인장강도 역시 압축강도에 비해 약 1/10정도의 강도 발현율을 나타내고 있다. 건조 수축에 의한 길이 변화율은 양호한 편으로 나타났는데, 적당한 AE공기 연행제를 사용하면 실무에서 매우 유용한 혼화제로써의 사용이 가능할 것으로 판단된다.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.1630-1636
• /
• 2009

Nine alkali-activated (AA) mortars were mixed and cured at water or air-dried conditions to explore the significance and limitation for the application of the combination of Ba and Ca ions as an alkali-activator. Ground granulated blast-furnace slag (GGBS) was used for source materials, and calcium hydroxide (Ca(OH)₂) and barium hydroxide (Ba(OH)₂) were employed as alkali activators. Test results clearly showed that the water curing condition was more effective than the air-dried curing condition for the formation of the denser calcium silicate hydrate (C-S-H) gels that had a higher molar Si/Ca ratio, resulting in a higher strength development. At the same time, the introduction of Ba(OH)₂ led to the formation of 2CaO·Al₂O₃·SiO₂·8H₂O (C₂ASH₈) hydrates with higher molar Si/Al and Ca/Al ratios. Based on the test results, it can be concluded that the developed cementless mortars have highly effective performance and high potential as an eco-friendly sustainable building material.