• 한국진공학회지
• /
• 제11권2호
• /
• pp.87-96
• /
• 2002

위성체가 작동하는 우주환경인 고진공상태에서는 위성체의 부품에서 발생 할 수 있는 outgassing으로 인해 위성체가 오염되어 위성체의 성능이 저하될 수 있으며, 특히 이차면경(second surface mirror) 및 광학렌즈 등을 오염시킴으로써 위성체 본연의 임무수행 실패라는 결과를 초래할 수도 있다. 따라서 지상에서 위성체의 부품에 대해 고온($85^{\circ}C$ 이상)과 고진공($5.0\times10^{-3}$ Pa 이하)의 상태를 모사하여 오염물질을 제거함으로써 outgassing의 발생을 막고, 아울러 오염근원을 검출할 수 있는 vacuum bake-out 시험이 필수적이라 할 수 있다. 이를 위해서 한국항공우주연구원 우주시험동에 설치된 bake-out 챔버를 이용하여 위성체 부품 중에서 SAR(Solar Array Regulator)와 MLI(Multi Layer Insulator)를 예를 들어 오염측정에 관한 연구를 수행하였다. 항공우주연구원의 bake-out 챔버는 rotary vacuum pump와 booster pump를 이용하여 5.0 Pa의 저진공을 형성하고, 2대의 cryopump를 이용하여$5.0\times10^{-3}$ Pa 이하의 고진공을 생성하게 된다. 또한 $180^{\circ}C$까지의 고온을 모사하기 위하여 챔버 shroud 안쪽에 ceramic 재질로 된 heater가 $30^{\circ}$간격으로 총 48개를 설치되어 있으며, 온도제어는 PID(Proportional Integral Differential) 제어 방식이 이용되었다. Vacuum bake-out 시험시에는 RGA(Residual Gas Analyzer)를 이용하여 각종 오염물질을 검출할 수 있고, TQCM(Thermoelectric Quartz Crystal Microbalance)을 사용하여 발생하는 오염물질의 방출률(outgassing rate)을 측정한다. 또한 필요시에는 IR/UV Spectrometer를 이용하여 witness plate에 흡착된 오염물질의 성분을 분석하여 위성체 부품으로의 적합성을 판단한다. SAR의 bake-out에서는 TQCM 측정결과 오염물질이 시간에 따라 감소추이는 보이지만 꾸준히 배출되고 있는 경향을 나타내고, RGA 분석결과 그 성분이 고분자 화합물로 추정되어 위성체 부품으로 사용하기에는 적절하지 못할 것으로 판단하였다. MLI의 bake-out에서는 RGA 및 witness plate를 이용한 오염측정 결과 특이한 오염물질을 발견할 수 없었다.

• 산업경영시스템학회지
• /
• 제39권3호
• /
• pp.180-191
• /
• 2016

Optimizing energy usage for maximum efficiency is an essential goal for manufacturing plants in every industrial manufacturing sector. The generation and distribution of purifying compressed air is a large expense incurred in practically all manufacturing processes. Not only is the generation and treatment expensive equipment of compressed air, but frequent maintenance and effective operation is also required. As a plant's compressed air system is often an integral part of the production process, it needs to be reliable, efficient, and easy to be maintain. In this paper, we study to find operating method to save energy from the adsorption dryer in the process of purifying compressed air, which is required for a clean room production site in "A" company. The compressed air passes through a pressure vessel with two "towers" filled with a material such as activated alumina, silica gel, molecular sieve or other desiccant material. This desiccant material attracts the water from the compressed air via adsorption. As the water clings to the desiccant, the desiccant particle becomes saturated. Therefore, Adsorption dryer is an extremely significant facility which removes the moisture in the air $70^{\circ}C$ below the dew point temperature while using a lot of energy. Also, the energy consumption of the adsorption dryer can be varied by various operating conditions (time, pressure, temperature, etc). Therefore, based on existing operating experiments, we have searched operating condition to maximize energy saving by changing operating conditions of the facility. However, due to a short experiment period (from September to October), further research will be focused on considering seasonality.

• Carbon letters
• /
• 제26권
• /
• pp.18-24
• /
• 2018

Pollution of chloride ion-reinforced concrete can trigger active corrosion processes that reduce the useful life of structures. Multifunctional materials used as a counter-electrode by electrochemical techniques have been used to rehabilitate contaminated concrete. Cement-based pastes added to carbonaceous material, fibers or dust, have been used as an anode in the non-destructive Electrochemical Chloride Extraction (ECE) technique. We studied the performance of the addition of Carbon Fiber (CF) in a cement-graphite powder base paste used as an anode in ECE of concretes contaminated with chlorides from the preparation of the mixture. The experimental parameters were: 2.3% of free chlorides, 21 days of ECE application, a Carbon Fiber Volume Fraction (CFVF) of 0.1, 0.3, 0.6, 0.9%, a lithium borate alkaline electrolyte, a current density of $4.0A/m^2$ and a cement/graphite ratio of 1.0 for the paste. The efficiency of the ECE in the traditional technique using metal mesh as an anode was 77.6% and for CFVF of 0.9% it was 90.4%, with a tendency to increase to higher percentages of the CFVF in the conductive cement-graphite paste, keeping the pH stable and achieving a homogeneous ECE in the mass of the concrete contaminated with chlorides.

• 대한수학회보
• /
• 제44권1호
• /
• pp.131-150
• /
• 2007

In this paper, we will define direct producted $W^*-porobability$ spaces over their diagonal subalgebras and observe the amalgamated free-ness on them. Also, we will consider the amalgamated free stochastic calculus on such free probabilistic structure. Let ($A_{j},\;{\varphi}_{j}$) be a tracial $W^*-porobability$ spaces, for j = 1,..., N. Then we can define the corresponding direct producted $W^*-porobability$ space (A, E) over its N-th diagonal subalgebra $D_{N}\;{\equiv}\;\mathbb{C}^{{\bigoplus}N}$, where $A={\bigoplus}^{N}_{j=1}\;A_{j}\;and\;E={\bigoplus}^{N}_{j=1}\;{\varphi}_{j}$. In Chapter 1, we show that $D_{N}-valued$ cumulants are direct sum of scalar-valued cumulants. This says that, roughly speaking, the $D_{N}-freeness$ is characterized by the direct sum of scalar-valued freeness. As application, the $D_{N}-semicircularityrity$ and the $D_{N}-valued$ infinitely divisibility are characterized by the direct sum of semicircularity and the direct sum of infinitely divisibility, respectively. In Chapter 2, we will define the $D_{N}-valued$ stochastic integral of $D_{N}-valued$ simple adapted biprocesses with respect to a fixed $D_{N}-valued$ infinitely divisible element which is a $D_{N}-free$ stochastic process. We can see that the free stochastic Ito's formula is naturally extended to the $D_{N}-valued$ case.

• 한국안광학회지
• /
• 제4권2호
• /
• pp.1-16
• /
• 1999

주기적으로 변하는 압력이 탈수상태의 HEMA 콘택트 렌즈에 작용하여 진동이 발생하는 경우, 렌즈상의 임의의 위치에서 파형과 평균진폭을 예측할 수 있는 미분방정식과 컴퓨터 프로그램을 유도하였다. 중심부분의 두께 0.08mm, 직경 14mm, 곡율반경 8mm 렌즈의 고유 공진진동수는 추가질량감소법에 의해 5730 Hz으로 측정되었다. 진동에 주로 관여하는 렌즈의 유효반경의 측정값과 고유 공진 진동수값으로부터 base curve를 가지고 있는 상태에서 렌즈의 탄성율(Young's modulus)을 구할 수 있었으며, 본 실험에 사용한 렌즈에서는 그 값이 $4{\times}10^9$ Pa으로 구해졌다. 파동방정식과 탄성이론에 기초를 두고 유도한 컴퓨터 모델을 작동하여 렌즈의 유효 반경, 렌즈두께, damping, 압력진폭, driving 압력의 진동수 등의 변수가 진동에 미치는 영향을 모사하였다. 렌즈의 유효반경이 클수록, 렌즈의 두께가 얇아 질수록 공진진동수는 낮아지며, 공진진동수 감소에 따라 평균진폭의 급격한 증가가 예측되었다. 외부 압력의 진동수가 렌즈의 고유진동수의 정배수에 접근하는 경우 diaphram의 진동 파형은 원호형에서 파도 또는 종(bell)형으로 전환되며 결과적으로 중심부근의 진폭이 갑자기 상승하게 될 것으로 예상된다.

• Wind and Structures
• /
• 제19권3호
• /
• pp.339-352
• /
• 2014

This paper discusses the appropriate duration for basic gust wind speeds in wind loading codes and standards, and in wind engineering generally. Although various proposed definitions are discussed, the 'moving average' gust duration has been widely accepted internationally. The commonly-specified gust duration of 3-seconds, however, is shown to have a significant effect on the high-frequency end of the spectrum of turbulence, and may not be ideally suited for wind engineering purposes. The effective gust durations measured by commonly-used anemometer types are discussed; these are typically considerably shorter than the 'standard' duration of 3 seconds. Using stationary random process theory, the paper gives expected peak factors, $g_u$, as a function of the non-dimensional parameter ($T/{\tau}$), where T is the sample, or reference, time, and ${\tau}$ is the gust duration, and a non-dimensional mean wind speed, $\bar{U}.T/L_u$, where $\bar{U}$ is a mean wind speed, and $L_u$ is the integral length scale of turbulence. The commonly-used Durst relationship, relating gusts of various durations, is shown to correspond to a particular value of turbulence intensity $I_u$, of 16.5%, and is therefore applicable to particular terrain and height situations, and hence should not be applied universally. The effective frontal areas associated with peak gusts of various durations are discussed; this indicates that a gust of 3 seconds has an equivalent frontal area equal to that of a tall building. Finally a generalized gust response factor format, accounting for fluctuating and resonant along-wind loading of structures, applicable to any code is presented.

• 한국도서관정보학회지
• /
• 제8권
• /
• pp.155-184
• /
• 1981

The publication of the result of scholarly research is an integral part of the process by which learning is advanced. The university presses, as one of the major scholarly publishers are now confronted with many critical problems, such as the declining unit sales, the explosion of manuscripts, the challenge of new publishing technologies, etc., in performing the role of the scholarly communication system. The purpose of this study is to identify the problems imposed on the university presses and alternative strategies for them. For the study, the related literature to the subject were read, analyzed and synthesized, from which the overall prospect of the problems and alternative strategies are derived. The conclusion of the study can be summarized as follows: (1) The faith of the university should lie in its role to advance scholarly learning through production and dissemination of high-quality knowledge, and the university press should materialize such a faith. (2) The scholarly books, though not the best media of scholarly communication taking a side view of its timeliness and brevity, can perform the function of the best media for the specific subject and readers. (3) The scholarly books as national resource must be published for the scholars demanding them even though the publication can't help depending on the subsidiary fund. (4) For the survival and activation of the university presses, the following strategies should be examined, and put in force if necessary. (a) The role of the foundation su n.0, pporting the university presses should be expanded (b) The Co-operative system among the operations of the presses should be established. (c) It is desirable that the university without the press should participate in the university with the press for both the financial su n.0, pporting and the publicizing its faculty's manuscripts. (d) The positive efforts should be made for the increase of sales copies by implementing the dual-system of publication. (e) It is desirable that 'recording system' should be incorporated in the traditional publication system both for the lightening of financial problems and the explosion of publications. (f) It is necessary that the effective methods of the bibliographical control should be developed for the improvement of the scholarly communication. (g) Any kind of the permanent organization composed of the representatives from all the infrastructures of information industry should be established to study the character and direction of technological changes and to discern the better choice of specific, technologies in the scholarly communication system.

• 대한수학회보
• /
• 제53권4호
• /
• pp.1071-1085
• /
• 2016

For $b{\in}L^1_{loc}({\mathbb{R}}^n)$, let ${\mathcal{I}}_{\alpha}$ be the bilinear fractional integral operator, and $[b,{\mathcal{I}}_{\alpha}]_i$ be the commutator of ${\mathcal{I}}_{\alpha}$ with pointwise multiplication b (i = 1, 2). This paper shows that if the commutator $[b,{\mathcal{I}}_{\alpha}]_i$ for i = 1 or 2 is bounded from the product Morrey spaces $L^{p_1,{\lambda}_1}({\mathbb{R}}^n){\times}L^{p_2,{\lambda}_2}({\mathbb{R}}^n)$ to the Morrey space $L^{q,{\lambda}}({\mathbb{R}}^n)$ for some suitable indexes ${\lambda}$, ${\lambda}_1$, ${\lambda}_2$ and $p_1$, $p_2$, q, then $b{\in}BMO({\mathbb{R}}^n)$, as well as that the compactness of $[b,{\mathcal{I}}_{\alpha}]_i$ for i = 1 or 2 from $L^{p_1,{\lambda}_1}({\mathbb{R}}^n){\times}L^{p_2,{\lambda}_2}({\mathbb{R}}^n)$ to $L^{q,{\lambda}}({\mathbb{R}}^n)$ implies that $b{\in}CMO({\mathbb{R}}^n)$ (the closure in $BMO({\mathbb{R}}^n)$of the space of $C^{\infty}({\mathbb{R}}^n)$ functions with compact support). These results together with some previous ones give a new characterization of $BMO({\mathbb{R}}^n)$ functions or $CMO({\mathbb{R}}^n)$ functions in essential ways.

• 한국시뮬레이션학회논문지
• /
• 제21권4호
• /
• pp.25-33
• /
• 2012

무장헬기는 대 기갑 작전, 공중강습 작전 엄호, 수색 및 정찰을 위한 항공지원업무 등 다양한 임무를 수행한다. 대부분의 무장헬기의 경우 Tandem식의 조종 방식을 가지고 있지만 Side-by-Side 방식의 헬기 또한 개발되고 있다. 이러한 현재의 추세를 볼 때, 공격전용 헬기의 Tandem식의 임무절차가 아니라 Side-by-Side 헬기에 최적화 된 임무절차와 이에 따른 임무하중에 대한 연구가 필요하다. 본 연구에서는 이러한 절차를 분석하기 위한 헬기 시뮬레이터를 구축하고, 주요 헬기 임무 절차를 선별하여 실험계획법에 따라 여러 대안을 평가하였다. 평가를 위한 데이터는 임무수행시간 측정 데이터와 NASA-TLX를 기법으로 정/부조종사 임무하중을 측정한 데이터로, 각 데이터들의 상자그림과 데이터의 평균 및 분산을 살펴보아 어떤 임무절차의 대안이 효과적이고 공통적인 임무로는 무엇이 가능한지를 분석하였다. 이를 통해 임무효과에 최적화 된 임무수행절차를 수립하는 것에 목적을 두었다.

• 한국공작기계학회논문집
• /
• 제16권5호
• /
• pp.1-6
• /
• 2007

This paper presents a new experimental Servo-Parameter tuning technique for a 6-axes articulated robot manipulator, especially considering robot's dynamics. First of all, investigation for proportional gain of velocity control loop by using a Dynamic Signal Analyzer(DSA) is performed. Using the FUNCTION characteristic of DSA based on the Bode plot, the Bode plot of open loop transfer function can be obtained. In turn, the integral gain of a servo controller can be found out by using the integration time constant extracted from the Bode plot of open loop transfer function. In the meanwhile, the positional gain of the servo controller can be obtained by using the Bode plot of the closed loop transfer function. Using the experimental gain tuning technique proposed in this paper, the testing linear motion of DR6-II robot has been shown to be more accurate rather than the motion with a conventional(empirical) gain tuning technique in Doosan Mecatec Co., Ltd., by improving the dynamic response of the robot as well as synchronizing each joint velocity according to the positional command of an end-effector.